Moxa Technologies MD-200 Series User manual

MD-200 Series Hardware User’s Manual
Edition 2.0, February 2017
www.moxa.com/product
© 2017 Moxa Inc. All rights reserved.

MD-200 Series Hardware User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
© 2017 Moxa Inc. All rights reserved.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas
Toll
-free: 1-888-669-2872
Tel:
[phone]
Fax:
[phone]
Moxa China (Shanghai office)
Toll
-free: 800-820-5036
Tel:
[phone]
Fax:
[phone]
Moxa Europe
Tel:
[phone]
Fax:
[phone]
Mo
xa Asia-Pacific
Tel:
[phone]
Fax:
[phone]
Moxa India
Tel:
[phone]
Fax:
[phone]

Table of Contents
1. Introduction...................................................................................................................................... 1-1
Overview...........................................................................................................................................1-2
Ordering Information ..........................................................................................................................1-2
Package Checklist...............................................................................................................................1-2
Product Features ................................................................................................................................1-3
Hardware Specifications ......................................................................................................................1-3
MD-226 Hardware Specifications ...................................................................................................1-3
MD-224 Hardware Specifications ...................................................................................................1-4
MD-219 Hardware Specifications ...................................................................................................1-5
Safety Information ......................................................................................................................1-7
2. Hardware Overview .......................................................................................................................... 2-1
Appearance and Layout.......................................................................................................................2-2
MD-226......................................................................................................................................2-2
MD-224......................................................................................................................................2-3
MD-219......................................................................................................................................2-4
SavvyTouch Display Control Buttons .....................................................................................................2-5
3. Hardware Installation and Connection.............................................................................................. 3-1
Placement Notes.................................................................................................................................3-2
Installation Notes ...............................................................................................................................3-2
Desktop Mounting .......................................................................................................................3-3
Panel Mounting ...........................................................................................................................3-5
VESA Mounting ...........................................................................................................................3-5
Grounding the MD-200 Series Display ...................................................................................................3-9
Powering On the MD-200 Series Display ..............................................................................................3-10
Powering Off the MD-200 Series Display..............................................................................................3-10
SavvyTouch Display Control Buttons............................................................................................3-10
Connecting Data Transmission Cables .................................................................................................3-12
Enabling the Touch Screen Function (Z models only).............................................................................3-12
Connecting Video Input Cables...........................................................................................................3-13
Connecting the Built-in Buzzer ...........................................................................................................3-14
4. Touch-Screen Function...................................................................................................................... 4-1
Installing Touch Function Driver ...........................................................................................................4-2
Performing Screen Calibration..............................................................................................................4-7
5. Display Control Interface .................................................................................................................. 5-1
A. Regulatory Approval Statement ........................................................................................................ A-1
B. On-Screen Display (OSD) Controls .................................................................................................... B-1
Opening the Configuration Screen.........................................................................................................B-2
OSD Menu Description.........................................................................................................................B-2
Source – Auto Source ..................................................................................................................B-2
Image Setting – Auto Setup .........................................................................................................B-2
Image Setting – Display...............................................................................................................B-3
Color Mode – Color Temperature...................................................................................................B-3
Color Mode – Color Temperature – User.........................................................................................B-3
Management – Communication .....................................................................................................B-4
OSD Misc – OSD Position..............................................................................................................B-4
OSD Misc – Language ..................................................................................................................B-5
OSD Misc – Preset Save ...............................................................................................................B-5
OSD Misc – OSD Lock Mode..........................................................................................................B-5
Service ......................................................................................................................................B-6
Service – Test Pattern..................................................................................................................B-6

1
1. Introduction
The MD-200 series displays are designed to meet the demands of the marine industry. With full range dimming,
optical bonding (optional), and wide angle viewing, these computer display terminals meet the required marine
standards and are perfectly suited for a variety of marine applications, both indoors and outdoors. In addition,
these displays use either AC or DC power inputs, simplifying the installation of the displays at field sites.
The MD-200 series displays are compliant with various industrial marine standards, including IEC 60945, DNV,
and IACS-E10, lending greater credence to their suitability for maritime operations.
There are three models in the MD-200 series displays: MD-219, MD-224, and MD-226. The main differences
among the models are in the panel size, display aspect ratio, and pixel resolution. Unless otherwise specified,
all information and functions described in the manual apply to all models.
This chapter includes the following topics:

Overview

Ordering Information

Package Checklist

Product Features

Hardware Specifications
MD-226 Hardware Specifications
MD-224 Hardware Specifications
MD-219 Hardware Specifications
Safety Information

MD-200 Series Hardware Introduction
1-2
Overview
Designed for durably reliable service as an ECDIS (Electronic Chart Display and Information System) display
component, the MD-200 series displays provide full range dimming and optional optical bonding, making the
displays well-suited not only for ECDIS applications, but also for a variety of other bridge applications.
The MD-200 series displays feature both AC and DC power inputs, and can be conveniently installed on any
bridge, without the need for extra hardware.
Moxa’s marine displays are compliant with industrial marine standards, such as IEC 60945, DNV, and IACS-E10,
giving strong assurance of their suitability for marine applications.
Ordering Information
Available Models
MD-226X: 26-inch display with 16:10 aspect ratio, 1920 x 1200 resolution, LED backlighting,
RS-232/422/485 serial ports, dual-power supply (AC/DC).
MD-224X: 24-inch display, 16:9 aspect ratio, full HD (1920x1080), LED backlighting, RS-232/422/485 serial
ports, dual power input (AC/DC).
MD-224Z: 24-inch display, 16:9 aspect ratio, full HD (1920x1080), projected-capacitive touch panel, LED
backlighting, RS-232/422/485 serial ports, dual power input (AC/DC).
MD-219X: 19-inch, 5:4 aspect ratio display (1280x1024), LED backlight, DVI-D/VGA, RS-232/422/485 serial
ports, dual power input (AC/DC).
MD-219Z: 19-inch, 5:4 aspect ratio display (1280x1024), projected capacitive multi-touch, LED backlight,
DVI-D/VGA, RS-232/422/485 serial ports, dual power input (AC/DC).
Optional Accessories (sold separately)
•Desktop mounting kit
•Panel mounting clamps
•VESA mounting kit
Package Checklist
Each model is shipped with the following items:
•One MD-200 series display
•One VGA cable
•One DVI-D cable
•One 2-pin terminal block
•Two 5-pin terminal block
•Documentation and software CD
(Note: High brightness models MD-219Z-HB and MD-224Z-HB do not come with a software CD.)
•Quick installation guide (printed)
•Warranty card
NOTE
I
f any of the above items are missing or damaged, contact your sales representative.

MD-200 Series Hardware Introduction
1-3
Product Features
The MD-200 series displays include the following features:
•26-inch display (MD-226X), 24-inch display (MD-224X/MD-224Z), or 19-inch display (MD-219X/MD-219Z)
•Color calibrated for ECDIS compliance
•Fanless design
•SavvyTouch display controls
•RS-232 and RS-422/485 serial ports for sending UART commands to configure display settings
•Dual AC/DC power input
•(Available upon request) Optically bonded model
Hardware Specifications
This section includes the hardware specifications for each MD-200 series display model.
MD-226 Hardware Specifications
Display
Panel Size:
26” viewable image size
Panel Type:
MVA
Aspect Ratio:
16:10
Pixels:
1920 x 1200 (WUXGA)
Pixel Pitch
(RGB): 0.2865 (H) x 0.2865 (V) mm
Response Time:
15 ms (gray to gray)
Contrast Ratio:
1500:1
Light Intensity:
300 cd/m^2
Viewing Angles:
176˚/176˚
Active Display Area:
550.08 (H) x 343.8 (V) mm
Max Colors:
16.7M / 8-bit color
Display Interface:
• 1
VGA input
• 1 DVI
-D input
Resolution:
• VGA: 640 x 480
• SVGA: 800 x 600
• XGA: 1024 x 768
• SXGA: 1280 x 1024
• WSXGA+: 1920 x 1080
• WUXGA: 1920 x 1200
Serial Interface
Serial Standards:
1 RS-232 port (male DB9), 1 RS-422/485 port (Euroblock)
Optical Isolation Protection:
4 kV
Serial Signals
RS
-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS
-422: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-2w: Data+, Data-, GND
Front Panel
LEDs:
MENU, Brightness, INFO, ECDIS, Day/Dusk/Night
Smart OSD:
Yes
Physical Characteristics
Housing:
Aluminum sheet metal

MD-200 Series Hardware Introduction
1-4
Weight:
15.2 kg
Dimensions:
621 x 440 x 90 mm (24.45 x 17.48 x 3.57 in)
Mounting:
VESA, panel, or desktop mountings
Environmental Limits
Operating Temperature:
-15 to 55°C (5 to 131°F)
Storage
Temperature: -20 to 60°C (-4 to 140°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
IP Rating:
• Front: IP54
• Rear: IP22
Anti
-Vibration:
• 0.7 g @ DNV 2.4 (Class A), sine wave, 2
-100 Hz, 1 Oct./min., 1.5 hr per axis
• 1 Grms
@ DNV 2.4, random wave, 3-100 Hz, 2.5 hr per axis
• 2.1 g @ DNV 2.4 (Class C), sine wave, 2
-50 Hz, 1 Oct./min., 1.5 hr per axis
Power Requirements
Input Voltage:
100 to 240 VAC, 50/60 Hz, 24 VDC
Power Consumption:
40 W (Max)
Standards and Certifications
Safety:
UL 60950-1
EMC:
EN 55032 Class B, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4, FCC Part 15 Subpart B Class A
Marine:
IEC 60945 4th, DNV, IACS E10, IEC 61174
Green Product:
RoHS, cRoHS, WEEE
Warranty
Warranty Period:
1 year
Details:
See www.moxa.com/warranty
MD-224 Hardware Specifications
Display
Panel Size:
24” viewable image size
Panel Type:
MVA
Aspect Ratio:
16:9
Pixels:
1920 x 1080 (WSXGA+)
Pixel Pitch (RGB):
0.282 (H) x 0.282 (V) mm
Response Time:
25 ms (gray to gray)
Contrast Ratio:
5000:1
Light Intensity:
300 cd/m2
Viewing Angles:
178˚/178˚
Active Display Area:
531.36 (H) x 298.89 (V) mm
Max Colors:
16.7M / 8-bit color
Display Interface:
• 1 VGA input
• 1 DVI
-D input
Resolution:
• VGA: 640 x 480
• SVGA: 800 x 600
• XGA: 1024 x 768
• SXGA: 1280 x 1024
• WSXGA+: 1920 x 1080 (optimal setting)
Serial Interface
Serial Standards:
1 RS-232 port (male DB9), 1 RS-422/485 port (Euroblock)
Optical Isolation Protection:
4 kV

MD-200 Series Hardware Introduction
1-5
Serial Signals
RS
-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS
-422: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-2w: Data+, Data-, GND
Front Panel
LEDs:
MENU, Brightness, INFO, ECDIS, Day/Dusk/Night
Smart OSD:
Yes
Physical Characteristics
Housing:
Aluminum sheet metal
Weight:
12 kg
Dimensions:
595 x 393 x 75 mm (23.42 x 15.47 x 2.95 in)
Mounting:
VESA, panel, or desktop mountings
Environmental Limits
Operating Temperature:
-15 to 55°C (5 to 131°F)
Storage Temperature:
-20 to 60°C (-4 to 140°F)
Ambient Relative
Humidity: 5 to 95% (non-condensing)
IP Rating:
• Front: IP54
• Rear: IP22
Anti
-Vibration:
• 0.7 g @ DNV 2.4 (Class A), sine wave, 2
-100 Hz, 1 Oct./min., 1.5 hr per axis
• 1 Grms @ DNV 2.4, random wave, 3
-100 Hz, 2.5 hr per axis
• 2.1 g @ DNV 2.4 (Class C), sine wave, 2
-50 Hz, 1 Oct./min., 1.5 hr per axis
Power Requirements
Input Voltage:
100 to 240 VAC, 50/60 Hz, 24 VDC
Power Consumption:
40 W (Max)
Standards and Certifications
Safety:
UL 60950-1, CCC
EMC:
EN 55032 Class B, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4, FCC Part 15 Subpart B Class A
Marine:
IEC 60945 4th, DNV, IACS E10, IEC 61174
Green Product:
RoHS, cRoHS, WEEE
Warranty
Warranty Period:
1 year
Details:
See www.moxa.com/warranty
MD-219 Hardware Specifications
Display
Panel Size:
19” viewable image size
Panel Type:
MVA
Aspect Ratio:
5:4
Pixels:
1280 x 1024 (SXGA)
Response Time:
20 ms (gray to gray)
Contrast Ratio:
2000:1
Light Intensity:
300 cd/m2
Viewing Angles:
178˚/178˚
Active
Display Area: 376.32 (H) x 301.06 (V) mm
Max Colors:
16.7M / 8-bit color
Display Interface:
VGA input x 1, DVI-D input x 1

MD-200 Series Hardware Introduction
1-6
Resolution:
• VGA: 640 x 480
• SVGA: 800 x 600
• XGA: 1024 x 768
•
XGA+: 1152 x 864
• SXGA: 1280 x 1024
Serial Interface
Serial Standards:
1 RS-232 port (DB9), 1 RS-422/485 port (terminal block)
Optical Isolation Protection:
4 kV
Serial Signals
RS
-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS
-422: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-2w: Data+, Data-, GND
Front
Panel
LEDs:
MENU, Brightness, INFO, ECDIS, Day/Dusk/Night
Smart OSD:
Yes
Physical Characteristics
Housing:
Aluminum sheet metal
Weight:
7.8 kg
Dimensions:
429 x 387 x 75 mm (16.89 x 15.24 x 2.95in)
Mounting:
VESA, panel, and desktop
Environmental Limits
Operating Temperature:
-15 to 55°C (5 to 131°F)
Storage Temperature:
-20 to 60°C (-4 to 140°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
IP Rating:
• Front: IP 54
• Rear: IP 22
Anti
-Vibration:
• 0.7 g @ DNV 2.4 (Class A), sine wave, 2
-100 Hz, 1 Oct./min., 1.5 hr per axis
• 1 Grms @ DNV 2.4, random wave, 3
-100 Hz, 2.5 hr per axis
• 2.1 g @ DNV 2.4 (Class C), sine wave, 2
-50 Hz, 1 Oct./min., 1.5 hr per axis
Power Requirements
Input Voltage:
•
DC: 24 VDC (with tolerance from 18 to 30 VDC, 2-pin terminal block)
• AC: 100 to 240 VAC
Power Consumption:
40 W (max.)
Standards and Certifications
Safety:
UL 60950-1, CCC
EMC:
EN 55032 Class B, EN 55024-4-2, EN 55024-4-3, EN 55024-4-4, FCC Part 15 Subpart B Class A
Marine Standard:
IEC-60945 4th, IEC-61162, IEC-61174
Marine Type Approval:
DNV 2.4 and IACS E10, ABS
Green Product:
RoHS, cRoHS, WEEE
Warranty
Warranty
Period: 1 year
Details:
See www.moxa.com/warranty

MD-200 Series Hardware Introduction
1-7
Safety Information
We recommend taking the following precautions to minimize heat build-up within the unit:
•Position the unit within ±40° of the vertical
•If (a) the unit is not positioned within ±40° of the vertical, (b) the ambient temperature exceeds 25°C, or
(c) the unit is used in a location with minimal ventilation, then install an external fan to increase airflow
upwards through the chassis
Important Safety Precaution
Even though the unit is rated to operate within the IEC 60945standard of -15 to 55°C for bridge applications, it
is best to ensure that the ambient temperature does not exceed 25°C. Doing so will significantly increase the
lifespan of your unit and reduce service costs.