Moxa Technologies MD-215 Series Instructions for use

MD-215 Hardware User’s Manual
Edition 2.0, February 2017
www.moxa.com/product
© 2017 Moxa Inc. All rights reserved.

MD-215 Hardware User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
© 2017 Moxa Inc. All rights reserved.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas
Toll
-free: 1-888-669-2872
Tel:
[phone]
Fax:
[phone]
Moxa China (Shanghai office)
Toll
-free: 800-820-5036
Tel:
[phone]
Fax:
[phone]
Moxa Europe
Tel:
[phone]
Fax:
[phone]
Moxa Asia
-Pacific
Tel:
[phone]
Fax:
[phone]
Moxa India
Tel:
[phone]
Fax:
[phone]

Table of Contents
1. Introduction...................................................................................................................................... 1-1
Overview...........................................................................................................................................1-2
Ordering Information ..........................................................................................................................1-2
Package Checklist...............................................................................................................................1-2
Product Features ................................................................................................................................1-2
MD-215 Hardware Specifications ..........................................................................................................1-3
2. Hardware Introduction ..................................................................................................................... 2-1
Appearance and Layout.......................................................................................................................2-2
Dimensions........................................................................................................................................2-2
SavvyTouch Display Control Buttons .....................................................................................................2-3
3. Hardware Connection Description ..................................................................................................... 3-1
Placement Guidelines ..........................................................................................................................3-2
Installation Notes ...............................................................................................................................3-2
Panel Mounting ...........................................................................................................................3-3
VESA Mounting ...........................................................................................................................3-4
Safety Precautions..............................................................................................................................3-5
Grounding the MD-215 Series ..............................................................................................................3-5
Powering on/off the MD-215 Series.......................................................................................................3-6
SavvyTouch Display Control Buttons..............................................................................................3-6
Connecting Data Transmission Cables ...................................................................................................3-8
Connecting the MD-215 to a Computer ..........................................................................................3-8
Enabling the Touch Screen Interface (Z models only)..............................................................................3-8
Connecting Video Input Cables.............................................................................................................3-9
Connecting the Built-in Buzzer ...........................................................................................................3-10
4. Display Control Interface .................................................................................................................. 4-1
Connecting to the UART Control Interface..............................................................................................4-2
UART Command Format ......................................................................................................................4-4
Command Format Details.............................................................................................................4-4
Downloading RGB Files........................................................................................................................4-6
VGA...........................................................................................................................................4-6
DVI ...........................................................................................................................................4-6
A. Regulatory Approval Statement ........................................................................................................ A-1
B. On-Screen Display (OSD) Controls .................................................................................................... B-1
Opening the Configuration Screen.........................................................................................................B-2
OSD Menu Map and Items Explained.....................................................................................................B-2
Source – Auto Source ..................................................................................................................B-2
Image Setting – Auto Setup .........................................................................................................B-2
Image Setting – Display...............................................................................................................B-3
Color Mode – Color Temperature...................................................................................................B-3
Color Mode – Color Temperature – User.........................................................................................B-4
Management – Communication .....................................................................................................B-4
OSD Misc – OSD position..............................................................................................................B-5
OSD Misc – Language ..................................................................................................................B-5
OSD Misc – Preset Save ...............................................................................................................B-5
OSD Misc – OSD Lock Mode..........................................................................................................B-6
Service ......................................................................................................................................B-6
Service – Test Pattern..................................................................................................................B-7
C. Display UART Commands .................................................................................................................. C-1
OSD Control Command .......................................................................................................................C-2
BRI (Brightness Minimum Value)...................................................................................................C-2
BRL (Set LED Brightness of Touch Keypad).....................................................................................C-2
BRM (Brightness Maximum Value).................................................................................................C-2
BRT (User Brightness Control) ......................................................................................................C-2
BRU (Glass Display Control-Brightness Button) ...............................................................................C-3
BZZ (Buzzer Control)...................................................................................................................C-3
DLN (Download ECDIS RGB File) ...................................................................................................C-3
DL? (ECDIS RGB Package Query) ..................................................................................................C-4
D2N (Download ECDIS RGB File (Second)) .....................................................................................C-4
D2? (ECDIS RGB Package Query (Second)) ....................................................................................C-4
ETC (Elapsed Time Counter Query)................................................................................................C-4
GMB (Glass Display Control - Minimum Brightness) .........................................................................C-5
POT (Potentiometer Control).........................................................................................................C-5
SWI (Scalar Firmware Version Query)............................................................................................C-5
SWK (Touch Keypad Firmware Version Query) ................................................................................C-5
ADF (AC Input Power Detect Function)...........................................................................................C-5
AD? (Query AC Input Power Detect Function Status)........................................................................C-6

DDF (DC Input Power Detect Function) ..........................................................................................C-6
DD? (Query DC Input Power Detect Function Status) .......................................................................C-6
BLI (Brightness Control)...............................................................................................................C-6
DUF (Disable UART Command Function).........................................................................................C-7
EMS (ECDIS Mode Select) ............................................................................................................C-7
CT? (Current Temperature Query).................................................................................................C-8
SS? (System Status Query)..........................................................................................................C-8
MCC (OSD Control Command) ......................................................................................................C-8

1
1. Introduction
In this chapter, we give a general introduction to the features and specifications of the MD-215 display.
The following topics are covered in this chapter:

Overview

Ordering Information

Package Checklist

Product Features

MD-215 Hardware Specifications

MD-215 Hardware Introduction
1-2
Overview
The MD-215 15-inch display has a rugged design for industrial environments. The display uses VGA and DVI-D
video signals to support a 1024 x 768 resolution, and comes with RS-232/422/485 ports for connecting serial
devices.
The MD-215 series displays are designed with a wide, -40 to 70°C temperature range, making them some of
the most reliable industrial platforms available for harsh, hot, indoor/outdoor environments.
The MD-215 series also features a 1000-nit LCD panel offering a sunlight-readable, projected-capacitive,
glove-friendly, multi-touch screen, providing an excellent touch panel for outdoor applications.
Ordering Information
Available Models
MD-215X-T: 15-inch display, DVI-D/VGA video output, AC/DC dual power, tape bonding
MD-215Z-T: 15-inch display, DVI-D/VGA video output, AC/DC dual power, multi-touch glove friendly, tape
bonding
Optional Accessories (can be purchased separately)
•Panel mounting clamps
•VESA mounting kit
Package Checklist
Each model is shipped with the following items:
•MD-215 display
•VGA cable
•DVI-D cable
•2-pin terminal block x 1
•5-pin terminal block x 2
•Quick installation guide (printed)
•Warranty card
NOTE
Please notify your sales representative if any of the above items are missing or damaged.
Product Features
The MD-215 display has the following features:
•15-inch industrial-grade display
•-40 to 70°C wide-temperature design
•1000-nit sunlight-readable LCD
•Glove-friendly multi-touch (touch model only)
•Fanless system design
•Multiple power supplies (AC & DC)

MD-215 Hardware Introduction
1-3
MD-215 Hardware Specifications
Display
Panel Size:
15-inch readable image size
Panel Type:
TN
Touch:
Capacitive multi-touch with glove-friendly support (touch models only)
Aspect Ratio:
5:4
Pixels:
1024 x 768
Pixel Pitch (RGB):
0.297 (H) x 0.297 (V) mm
Response Time:
20 ms (gray to gray)
Contrast Ratio:
700:1
Light Intensity:
1000 cd/m/m
Viewing Angles:
160°/140°
Active Display Area:
304.128 (H) x 228.096 (V) mm
Display Interface:
VGA input x 1, DVI-D input x 1
Serial Interface
Serial Standards:
1 RS-232 port (DB9), 1 RS-422/485 port (terminal block)
Optical Isolation Protection:
4 kV
Serial Signals
RS
-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS
-422: TxD+, TxD-, RxD+, RxD-, GND
RS
-485-2w: Data+, Data-, GND
Front Panel
LEDs:
MENU, brightness, INFO, Brightness mode, Day/Dusk/Night
Smart OSD:
Yes
Physical Characteristics
Housing:
Aluminum sheet metal
Weight:
6.1 kg (13.56 lb)
Dimensions:
356 x 315 x 77.2 mm (14.02 x 12.40 x 3.04 in)
Mounting:
Panel (standard), VESA (mounting kit is optional)
System Cooling:
Fanless thermal design
Environmental Limits
Operating Temperature:
-40 to 70°C (-40 to 158°F)
Storage Temperature:
-40 to 70°C (-40 to 158°F)
Ambient Relative Humidity:
5 to 95% (non-condensing)
Anti
-vibration: 2 Grms, 5-500 Hz frequency, compliant with IEC 60068-2-6 standard
Anti
-shock: 20 Grms, half sine wave under system operating, 11 ms duration, compliant with IEC 60068-2-
27
standard
Power Requirements
Input Voltage:
• DC: 12/24 VDC (Range 9 to 36 VDC)
• AC: 100 to 240 VAC
Power Consumption:
60 W (max.)
Standards and Certifications
Safety:
UL 60950-1, IEC 60950-1
EMC:
EN 55032/24
EMI:
CISPR 32, FCC Part 15B Class A

MD-215 Hardware Introduction
1-4
EMS:
IEC 61000
-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000
-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000
-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000
-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000
-4-6 CS: 10 V
IEC 61000
-4-8
IEC 61000
-4-11
Ingress Protection Rating:
IP66 (front) / IP22 (rear)
Green Product:
RoHS, cRoHS, WEEE
Warranty
Warranty Period:
3 years for system, 1 year for LCD panel
Details:
See www.moxa.com/warranty
We recommend taking the following precautions to minimize heat build-up within the display:
•Position the display within ±40° of the vertical
•If (a) the display is not positioned within ±40° of the vertical, (b) the ambient temperature exceeds 25°C,
or (c) the display is used in a location with minimal ventilation, then install an external fan to increase
airflow upwards through the chassis
Important Safety Precaution:
Even though the display is rated to operate within the IEC 60945standard of -15 to 55°C for bridge applications,
it is best to ensure that the ambient temperature does not exceed 25°C. Doing so will significantly increase the
lifespan of your display and reduce service costs.

2
2. Hardware Introduction
The MD-215 Series display is compact, well-designed, and ruggedized for marine applications. The intelligent
SavvyTouch display control buttons allow you to see control buttons easily in low light environments and
identify system hardware failures easily. Multiple serial ports allow you to configure display parameters, and
the reliable and stable hardware platform lets you devote your attention to developing your applications.
The following topics are covered in this chapter:

Appearance and Layout

Dimensions

SavvyTouch Display Control Buttons

MD-215 Hardware Hardware Introduction
2-2
Appearance and Layout
Dimensions