Moxa Technologies NPort IA5000A Series User manual

NPort IA5000A Series User’s Manual
Third Edition, April 2013
www.moxa.com/product
© 2013 Moxa Inc. All rights reserved.
Reproduction without permission is prohibited.

NPort IA5000A Series User’s Manual
The software described in this manual is furnished under a license agreement and may be used only in accordance with
the terms of that agreement.
Copyright Notice
Copyright ©2013 Moxa Inc.
All rights reserved.
Reproduction without permission is prohibited.
Trademarks
The MOXA logo is a registered trademark of Moxa Inc.
All other trademarks or registered marks in this manual belong to their respective manufacturers.
Disclaimer
Information in this document is subject to change without notice and does not represent a commitment on the part of
Moxa.
Moxa provides this document as is, without warranty of any kind, either expressed or implied, including, but not limited
to, its particular purpose. Moxa reserves the right to make improvements and/or changes to this manual, or to the
products and/or the programs described in this manual, at any time.
Information provided in this manual is intended to be accurate and reliable. However, Moxa assumes no responsibility for
its use, or for any infringements on the rights of third parties that may result from its use.
This product might include unintentional technical or typographical errors. Changes are periodically made to the
information herein to correct such errors, and these changes are incorporated into new editions of the publication.
Technical Support Contact Information
www.moxa.com/support
Moxa Americas
Toll
-free: 1-888-669-2872
Tel:
[phone]
Fax:
[phone]
Moxa China (Shanghai office)
Toll
-free: 800-820-5036
Tel:
[phone]
Fax:
[phone]
Moxa Europe
Tel:
[phone]
Fax:
[phone]
Moxa Asia
-Pacific
Tel:
[phone]
Fax:
[phone]

Table of Contents
1. Introduction...................................................................................................................................... 1-1
Overview...........................................................................................................................................1-2
Package Checklist...............................................................................................................................1-2
Product Features ................................................................................................................................1-2
Product Specifications .........................................................................................................................1-3
2. Getting Started ................................................................................................................................. 2-1
Panel Layout ......................................................................................................................................2-2
NPort IA5150A Series ..................................................................................................................2-2
NPort IA5250A............................................................................................................................2-2
NPort IA5450A............................................................................................................................2-3
Connecting the Hardware ....................................................................................................................2-3
Wiring Requirements ...................................................................................................................2-3
Connecting the Power ..................................................................................................................2-4
Connecting to the Network ...........................................................................................................2-4
Connecting to a Serial Device .......................................................................................................2-4
LED Indicators ............................................................................................................................2-5
Adjust the Pull-high/Pull-low Resistors and Terminators for RS-422/RS-485 Ports ...............................2-5
3. Initial IP Address Configuration........................................................................................................ 3-1
Initializing the NPort’s IP Address .........................................................................................................3-2
Factory Default IP Address...................................................................................................................3-2
NPort Administration Suite...................................................................................................................3-2
ARP ..................................................................................................................................................3-2
Telnet Console ...................................................................................................................................3-3
Serial Console (19200, n, 8, 1).............................................................................................................3-6
4. Choosing the Proper Operation Mode................................................................................................ 4-1
Overview...........................................................................................................................................4-2
Real COM Mode ..................................................................................................................................4-2
RFC2217 Mode...................................................................................................................................4-3
TCP Server Mode................................................................................................................................4-3
TCP Client Mode .................................................................................................................................4-3
UDP Mode..........................................................................................................................................4-4
Pair Connection Mode..........................................................................................................................4-4
Ethernet Modem Mode.........................................................................................................................4-4
Reverse Telnet Mode...........................................................................................................................4-5
Disabled Mode....................................................................................................................................4-5
5. Web Console Configuration ............................................................................................................... 5-1
Opening Your Browser.........................................................................................................................5-2
Export/Import....................................................................................................................................5-5
Basic Settings ....................................................................................................................................5-5
Network Settings................................................................................................................................5-6
SNMP Settings ............................................................................................................................5-8
IP Address Report .......................................................................................................................5-8
Serial Settings....................................................................................................................................5-9
Serial Parameters......................................................................................................................5-10
Operating Settings............................................................................................................................5-11
Real COM Mode.........................................................................................................................5-11
RFC2217 Mode..........................................................................................................................5-14
TCP Server Mode.......................................................................................................................5-16
TCP Client Mode........................................................................................................................5-19
UDP Mode ................................................................................................................................5-23
UDP Multicast....................................................................................................................5-25
Pair Connection Mode ................................................................................................................5-25
Pair Connection Master Mode...............................................................................................5-25
Ethernet Modem Mode ...............................................................................................................5-26
Reverse Telnet Mode .................................................................................................................5-29
Disabled Mode ..........................................................................................................................5-30
Accessible IP Settings .......................................................................................................................5-30
Auto Warning Settings.......................................................................................................................5-31
Auto warning: Email and SNMP trap ............................................................................................5-31
Mail Server .......................................................................................................................5-31
SNMP Trap Server..............................................................................................................5-32
Event Type...............................................................................................................................5-32
Upgrade Firmware ............................................................................................................................5-34
Monitor ...........................................................................................................................................5-34
Monitor Line .............................................................................................................................5-34
Monitor Async...........................................................................................................................5-35
Monitor Async-Settings ..............................................................................................................5-35
Monitor Relay Output.................................................................................................................5-36

Change Password .............................................................................................................................5-36
Load Factory Default.........................................................................................................................5-37
Save/Restart....................................................................................................................................5-37
6. Configuring NPort Administrator....................................................................................................... 6-1
Overview...........................................................................................................................................6-2
Installing NPort Administrator ..............................................................................................................6-2
Configuration .....................................................................................................................................6-4
Broadcast Search ........................................................................................................................6-4
Unlock Password Protection ..........................................................................................................6-5
Configuring the NPort IA5000A .....................................................................................................6-6
Upgrading the Firmware...............................................................................................................6-7
Export Configuration....................................................................................................................6-8
Import Configuration ...................................................................................................................6-9
Monitor .............................................................................................................................................6-9
Port Monitor.....................................................................................................................................6-12
COM Mapping...................................................................................................................................6-12
On-line COM Mapping ................................................................................................................6-13
Off-line COM Mapping ................................................................................................................6-16
COM Grouping..................................................................................................................................6-17
Creating a COM Group ...............................................................................................................6-17
Deleting a COM Group ...............................................................................................................6-19
Adding a Port to a COM Group ....................................................................................................6-21
Removing a Port from a COM Group ............................................................................................6-22
Modify Ports in a COM Group ......................................................................................................6-24
Changing the COM Number of a COM Group .................................................................................6-24
Changing Advanced Settings and Serial Parameters of the COM Group.............................................6-26
Changing the Serial Port Specified as Signal Port for the COM Group ...............................................6-28
IP Address Report.............................................................................................................................6-29
7. IP Serial LIB...................................................................................................................................... 7-1
Overview...........................................................................................................................................7-2
IP Serial LIB Function Groups...............................................................................................................7-2
Example Program ...............................................................................................................................7-3
A. Pinouts and Cable Wiring .................................................................................................................. A-1
Port Pinout Diagrams ..........................................................................................................................A-2
Ethernet Port Pinouts...................................................................................................................A-2
RS-232/422/485 (male DB9) Pinouts.............................................................................................A-2
RS-422/485 (5-contact terminal block) Pinouts for the NPort IA5150A Series .....................................A-2
Power Input and Relay Output Pinouts ...........................................................................................A-2
Serial Cable Wiring Diagrams ...............................................................................................................A-3
Female DB9 to Male DB9..............................................................................................................A-3
Female DB9 to Male DB25 ............................................................................................................A-3
Ethernet Cables..................................................................................................................................A-4
B. Well Known Port Numbers ................................................................................................................ B-1
C. SNMP Agents with MIB II & RS-232 Like Groups............................................................................... C-1
RFC1213 MIB-II Supported SNMP Variables ...........................................................................................C-1
RFC1317: RS-232 MIB Objects.............................................................................................................C-3
D. Auto IP Report Protocol ....................................................................................................................D-1
E. Compliance Notice............................................................................................................................. E-1
CE Warning........................................................................................................................................E-1
Federal Communications Commission Statement ....................................................................................E-1
ATEX and IECEx Information................................................................................................................E-1

1
1. Introduction
Welcome to the NPort IA5000A Series of industrial serial device servers.
The following topics are covered in this chapter:

Overview

Package Checklist

Product Features

Product Specifications

NPort IA5000A Series Introduction
1-2
Overview
These advanced NPort IA device servers are more rugged than ever before, from the design, casing,
connectors, mounting methods, to the surge protection. Not only has the hardware been upgraded, but more
flexible and user-friendly software has been added. The NPort IA5000A series of device servers deliver easy
and reliable serial-to-Ethernet connectivity for the industrial automation market. The NPort IA5000A series is
designed to allow any serial device to connect to an Ethernet network. The compact size of the NPort IA5000A
device servers makes them an ideal choice for connecting RS-232/422/485 serial devices, such as PLCs,
sensors, meters, motors, drives, barcode readers, and operator displays. The NPort IA5000A Series device
servers come with a compact casing and a DIN-Rail mounting kit.
The NPort IA5000A serial device servers ensure the compatibility of network software that uses a standard
network API (Winsock or BSD Sockets) by providing five modes: TCP Server, TCP Client, UDP, Pair Connection,
Ethernet Modem, and Rtelnet. Thanks to the NPort IA5000A series’ Real COM/TTY drivers, software that works
with COM/TTY ports can be set up to work over a TCP/IP network, without modifying the serial COM software
applications. This excellent feature preserves your software investment and lets you enjoy the benefits of
networking your serial devices instantly.
The NPort IA5000A serial device servers support automatic IP configuration protocols (DHCP, BOOTP) and
manual configuration via a handy web browser console. Both methods ensure quick and effective installation.
And with the NPort IA5000A’s Windows Utility, installation is very straightforward, since all system parameters
can be stored and then copied to other device servers simultaneously.
Package Checklist
The NPort IA5000A Series device servers are shipped with the following items:
Standard Accessories
•1 NPort IA5150A/IA5250A/IA5450A serial device server
•Documentation and software CD
•Quick installation guide
•Warranty card
Optional Accessories
•DR-4524: 45W/2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input
•DR-75-24: 75W/3.2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input
•DR-120-24: 120W/5A DIN-Rail 24 VDC Power Supply with 88 to 132 VAC/176 to 264 VAC input by switch
NOTE: Notify your sales representative if any of the above items is missing or damaged.
Product Features
The NPort IA5000A Series device servers have the following features:
1. Make your serial devices Internet ready
2. Versatile socket operating modes, including TCP Server, TCP Client, UDP, Reverse Telnet, RFC2217,and
Real COM driver
3. 2- or 4-wire RS-485 with patented ADDC™ (Automatic Data Direction Control)
4. Slim type, inch-wide industrial strength casing
5. DIN-Rail or wall mountable
6. Built-in Ethernet cascading ports for easy wiring (RJ45 only)
7. Redundant dual DC power inputs
8. Warning by relay output and E-mail
9. IECEx certification (-IEX models)

NPort IA5000A Series Introduction
1-3
Product Specifications
Ethernet Interface
Number of Ports:
2
Speed:
10/100 Mbps, auto MDI/MDIX
Connector:
8-pin RJ45
Magnetic Isolation Protection:
1.5 kV built-in
Serial Interface
Number of Ports:
NPort® IA5150A: 1
NPort® IA5250A: 2
NPort® IA5450A: 4
Serial Standards:
RS-232/422/485
Connector:
NPort® IA5150A Series: DB9 male for RS
-232, terminal block for RS-422/485
NPort® IA5250A/IA5450 Series: DB9 male for RS
-232/422/485
Serial Line Protection:
• 15 kV ESD protection for all signals
• 2 kV isolation protection (NPort IA5150AI
/IA5150AI-T, NPort IA5250AI/IA5250AI-
T, NPort IA5450AI, NPort
IA5450AI
-T))
• 1 kV surge protection (Level 2)
RS
-485 Data Direction Control: ADDC® (automatic data direction control)
Serial Communication Parameters
Data Bits:
5, 6, 7, 8
Stop Bits:
1, 1.5, 2
Parity:
None, Even, Odd, Space, Mark
Flow Control:
RTS/CTS and DTR/DSR (RS-232 only), XON/XOFF
Baudrate:
50 to 921.6 Kbps
Serial Signals
RS
-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS
-422: Tx+, Tx-, Rx+, Rx-, GND
RS
-485-4w: Tx+, Tx-, Rx+, Rx-, GND
RS
-485-2w: Data+, Data-, GND
Software
Network Protocols:
ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, Rtelnet, DNS, SNMP , HTTP, SMTP, SNTP,
IGMP
Configuration Options:
Web Console, Serial Console, Telnet Console, Windows Utility
Windows Real
COM Drivers: Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8 x86/x64,
Windows 2012 x64
Fixed TTY Drivers:
SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6,
Solaris 10, FreeBSD, AIX 5.x, HP
-UX 11i
Linux Real TTY Driver
s: Linux kernel 2.4.x, 2.6.x, 3.x
Physical Characteristics
Housing:
Metal
Weight:
NPort® IA5150A Series: 475 g (1.05 lb)
NPort® IA5250A Series: 485 g (1.07 lb)
NPort® IA5450A Series: 560 g (1.23 lb)
Dimensions:
NPort
® IA5150A/5250A: 36 x 140 x 105 mm (1.42 x 5.51 x 4.13 in)
NPort
® IA5450A: 45.8 x 134 x 105 mm (1.80 x 5.28 x 4.13 in)

NPort IA5000A Series Introduction
1-4
Environmental Limits
Operating Temperature:
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models:
-40 to 75°C (-40 to 167°F)
Operating Humidity:
5 to 95% RH
Storage Temperature:
-40 to 85°C (-40 to 185°F)
Power Requirements
Input Voltage:
12 to 48 VDC (10.8 to 60 VDC)
Power Consumption:
NPort® IA5150A: 12 to 48 VDC, 220 mA @ 12 VDC; 110 mA @ 24 VDC
NPort® IA5150AI: 12 to 48 VDC, 255 mA @ 12 VDC; 130 mA
@ 24 VDC
NPort® IA5250A: 12 to 48 VDC, 250 mA @ 12 VDC; 125 mA @ 24 VDC
NPort® IA5250AI: 12 to 48 VDC, 290 mA @ 12 VDC; 150 mA @ 24 VDC
NPort® IA5450A: 12 to 48 VDC, 374 mA @ 12 VDC; 184 mA @ 24 VDC
NPort® IA5450AI: 12 to 48 VDC, 512 mA @ 12 VDC; 242 mA
@ 24 VDC
Regulatory Approvals
EMC:
CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A
Safety:
UL508, LVD
Hazardous Location:
UL/cUL Class 1 Division 2 Groups A, B, C and D
ATEX:
Class I, Zone 2
IECEx:
Ex nC IIC T3
EMS:
EN61000
-4-2 (ESD), Criteria B, Level 3
EN61000
-4-3 (RS), Criteria A, Level 3
EN61000
-4-4 (EFT), Criteria B, Level 4
EN61000
-4-5 (Surge), Criteria B, Level 3 for power line, Level 2 for communication line
EN61000
-4-6 (CS), Criteria A, Level 3
EN61000
-4-8, Criteria A, Level 3
EN61000
-4-11
Shock:
IEC60068-2-27
Freefall:
IEC60068-2-32
Vibration:
IEC60068-2-6
Reliability
Alert Tools:
Built-in buzzer and relay output
Automatic Reboot Trigger:
Built-in WDT (watchdog timer)
Warranty
Warranty Period:
5 years
Details:
See www.moxa.com/warranty

2
2. Getting Started
In this chapter, we give instructions on installing the NPort IA5000A device servers. Software installation is
covered in subsequent chapters.
The following topics are covered in this chapter:

Panel Layout

Connecting the Hardware
Wiring Requirements
Connecting the Power
Connecting to the Network
Connecting to a Serial Device
LED Indicators
Adjust the Pull-high/Pull-low Resistors and Terminators for RS-422/RS-485 Ports

NPort IA5000A Series Getting Started
2-2
Panel Layout
NPort IA5150A Series
NPort IA5250A

NPort IA5000A Series Getting Started
2-3
NPort IA5450A
Connecting the Hardware
This section describes how to connect the NPort IA5000A to serial devices for first time testing purposes. We
cover Wiring Requirements, Connecting the Power, Grounding the NPort IA5000A Series,
Connecting to the Network, Connecting to a Serial Device, and LED Indicators.
Wiring Requirements
ATTENTION
Safety First!
Be sure to disconnect the power cord before installing and/or wiring your NPort IA5000A
Series.
Wiring Caution!
Calculate the maximum possible current in each power wire and common wire. Observe all electrical codes
dictating the maximum current allowable for each wire size.
If the current goes above the maximum ratings, the wiring could overheat, causing serious damage to your
equipment.
Temperature Caution!
Please take care when handling the NPort IA5
000A. When plugged in, the NPort IA5000A’s internal
components generate heat, and consequently the casing may feel hot to the touch. When
installed with other
components, make sure that there is at least 2 cm clearance on all sides of
the NPort IA5000A in order to
allow proper heat dissipation.
You should heed the following:
•Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must
cross, make sure the wires are perpendicular at the intersection point.
NOTE: Do not run signal or communication wiring and power wiring in the same wire conduit.
To avoid interference, wires with different signal characteristics should be routed separately.

NPort IA5000A Series Getting Started
2-4
•You can use the type of signal transmitted through a wire to determine which wires should be kept separate.
The rule of thumb is that wiring that shares similar electrical characteristics can be bundled together.
•Keep input wiring and output wiring separate.
•Where necessary, it is strongly advised that you label wiring to all devices in the system.
Connecting the Power
Connect the 12-48 VDC power line with the NPort IA5000A’s terminal block. If the power is properly supplied,
the “Ready” LED will show a solid red color until the system is ready, at which time the “Ready” LED will change
to a green color.
Grounding the NPort IA5000A Series
Grounding and wire routing helps limit the effects of noise caused by electromagnetic interference (EMI). Run
the ground connection from the ground screw to the grounding surface prior to connecting devices.
WARNING
This product is intended to be mounted to a well
-grounded mounting surface such as a metal panel.
SG:
The Shielded Ground (sometimes called Protected Ground) contact
is the l
eft most contact of the 8 contact power terminal block
connector when viewed from the angle shown here. Connect the SG
wire to an appropriate grounded metal surface.
Connecting to the Network
Connect one end of the Ethernet cable to the NPort IA5000A’s 10/100M Ethernet port and the other end of the
cable to the Ethernet network. If the cable is properly connected, the NPort IA5000A will indicate a valid
connection to the Ethernet in the following ways:
•The Ethernet LED maintains a solid green color when connected to a 100 Mbps Ethernet network.
•The Ethernet LED maintains a solid orange color when connected to a 10 Mbps Ethernet network.
•The Ethernet LED will flash when Ethernet packets are being transmitted or received.
ATTENTION
Every NPort IA5150A/ IA5250A series is equipped with 2 Ethernet ports, which can
be used to create an
open
chain of NPort IA5000A device servers. You must be careful not to connect the Ethernet ports of
the two
device servers at the ends of the chain. In other words, NPort IA does NOT support a
closed chain.
Connecting to a Serial Device
Connect the serial data cable between the NPort IA5000A and the serial device. Serial data cables are optional
accessories for NPort.

NPort IA5000A Series Getting Started
2-5
LED Indicators
The top panels of all NPort IA5000As have four LED indicators, as described in the following table.
LED Name LED Color LED Function
PWR1, PWR2 red Power is being supplied to power input PWR1, PWR2.
Ready red Steady on: Power is on and the NPort IA5000A is booting up.
Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not
respond properly, or a relay output occurred.
When the above two conditions occur at the same time,
check the relay output first. If after resolving the relay output
the Ready LED is still blinking, then there is an IP conflict, or
the DHCP or BOOTP server did not respond properly.
green Steady on: Power is on and the NPort IA5000A is functioning normally.
Blinking: The device server has been located by Administrator’s
Location function.
off Power is off, or power error condition exists.
E1, E2 orange 10 Mbps Ethernet connection.
green 100 Mbps Ethernet connection.
off Ethernet cable is disconnected, or has a short.
P1, P2, P3, P4 orange Serial port is receiving data.
green Serial port is transmitting data.
off No data is being transmitted or received through the serial port.
Adjust the Pull-high/Pull-low Resistors and Terminators for
RS-422/RS-485 Ports
In certain critical environments, you may need to add termination resistors to prevent the reflection of serial
signals. When using termination resistors, it is important to set the pull high/low resistors properly so that
electrical signals do not become corrupted. It is improbable for a single pull high/low resistor value to suit all
the various environments and this is why the NPort IA5000A series provides DIP switches for setting the pull
high/low resistor values for each serial port.
The DIP switches are located on the PCB board; you will need to take off the covers to access them. To set the
pull-high resistor to 150 KΩ, flip DIP1 to “OFF,” and then set the pull-low resistor to 150 KΩ, and then flip DIP2
to “OFF.” To set the pull-high resistor to 1 KΩ, flip DIP1 to “ON,” and then set the pull-low resistor to 1 KΩ, and
then flip DIP2 to “ON.” Make sure that DIP3 is “ON” to enable the 120Ω terminator. The default settings for the
pull-high and pull-low resistors, and the terminators are all at “OFF.”

3
3. Initial IP Address Configuration
When setting up your NPort IA5000A for the first time, the first thing you should do is configure the IP address.
This chapter introduces the methods that can be used to configure the device server’s IP address. Select one
of the initial IP Address configuration methods to configure the NPort IA5000A’s IP Address. For
more details about network settings, see the Network Settings section from Chapter 5, Web Console
Configuration.
The following topics are covered in this chapter:

Initializing the NPort’s IP Address

Factory Default IP Address

NPort Administration Suite

ARP

Telnet Console

Serial Console (19200, n, 8, 1)

NPort IA5000A Series Initial IP Address Configuration
3-2
Initializing the NPort’s IP Address
Determine whether your NPort IA5000A needs to use a Static IP or Dynamic IP (either DHCP or BOOTP
application).
If the NPort IA5000A is used in a Static IP environment, you can use the NPort Administration Suite,
ARP, Web Console, Telnet Console, or Serial Console to configure the new IP address.
If the NPort IA5000A is used in a Dynamic IP environment, you can use the NPort Administration Suite,
Web Console, Telnet Console, or Serial Console to configure the NPort IA5000A to get an IP address
dynamically with DHCP, DHCP/BOOTP, or BOOTP.
ATTENTION
Consult your network administrator on how to reserve a fixed IP address for your NPort IA5000A in the
MAC
-
IP mapping table when using a DHCP Server or BOOTP Server. In most applications, you should assign
a fixed IP address to your NPort IA50
00A.
Factory Default IP Address
NPort IA5000A products are configured with the following default private IP address:
Default IP address: 192.168.127.254
(IP addresses of the form 192.168.xxx.xxx are referred to as private IP addresses, since it is not possible to
directly access a device configured with a private IP address from a public network. For example, you would not
be able to ping such a device from an outside Internet connection. NPort IA5000A applications that require
sending data over a public network, such as the Internet, require setting up the server with a valid public IP
address, which can be leased from a local ISP.)
NPort Administration Suite
NPort Administration Suite consists of some useful utility programs that are used to configure and manage your
NPort IA5000A.
See Chapter 5 for details on how to install NPort Administration Suite, and how to use this suite of
useful utilities to set up IP addresses and configure your NPort IA5000A Series serial device
servers.
ARP
You can make use of the ARP (Address Resolution Protocol) command to set up an IP address for your NPort
IA5000A. The ARP command tells your computer to associate the NPort IA5000A’s MAC address with the
intended IP address. You must then use Telnet to access the NPort IA5000A, at which point the device server’s
IP address will be reconfigured.
ATTENTION
In order to use this setup method, both your computer and NPort IA5000A must be
connected to the same
LAN. Or, you may use a cross
-over Ethernet cable to connect the NPort
IA5000A directly to your computer’s
Ethernet card. Before executing the ARP command,
your NPort IA5000A must be configured with the factory
default IP address
(192.168.127.254), and your computer and the NPort IA5000A must be on the same
subnet.

NPort IA5000A Series Initial IP Address Configuration
3-3
Take the following steps to use ARP to configure the IP address:
1. Obtain a valid IP address for your NPort IA5000A from your network administrator.
2. Obtain the NPort IA5000A’s MAC address from the label on its bottom panel.
3. Execute the ‘arp -s’ command from your computer’s MS-DOS prompt by typing:
4. arp –s 192.168.200.100 00-90-E8-xx-xx-xx
5. This is where 192.168.200.100 is the new IP address and 00-90-E8-xx-xx-xx is the MAC address for your
NPort IA5000A. (Be sure to use the actual IP address and MAC address for your NPort IA5000A.)
6. Next, execute a special Telnet command by typing:
telnet 192.168.200.100 6000
After issuing this command, a Connect failed message will appear, as shown here. After the NPort reboots,
its IP address should be updated to the new address, and you can reconnect using either Telnet, Web, or
Administrator to check that the update was successful.
Telnet Console
Depending on how your computer and network are configured, you may find it convenient to use network
access to set up your NPort IA5000A’s IP address. This can be done using Telnet.
ATTENTION
Figures in this chapter were generated using NPort
IA5450AI.
1. From the Windows desktop, click on Start and then select Run.
2. Type telnet 192.168.127.254 (use the correct IP address if different from the default) in the Open text
input box, and then click OK.
3. When the Telnet window opens, if you are prompted to input the Console password, input the password
and then press Enter.
Note that this page will only appear if the NPort is password protected.

NPort IA5000A Series Initial IP Address Configuration
3-4
4. Type 2to select Network settings, and then press Enter.
5. Type 1to select IP address and then press Enter.
6. Use the Backspace key to erase the current IP address, type in the new IP address, and then press Enter.

NPort IA5000A Series Initial IP Address Configuration
3-5
7. Press any key to continue…
8. Type mand then press Enter to return to the main menu.
9. Type sand then press Enter to Save/Restart the system.

NPort IA5000A Series Initial IP Address Configuration
3-6
10. Type yand then press Enter to save the new IP address and restart the NPort IA5000A.
Serial Console (19200, n, 8, 1)
You may use the RS-232 console port to set up the IP address for the NPort IA5000A. We suggest using PComm
Terminal Emulator, which is available free of charge as part of the PComm Lite program suite, to carry out the
installation procedure, although other similar utilities may also be used.
ATTENTION
The
Serial Console is serial port 1 of the NPort IA5250A series and it is the DB9 serial port (in RS-
232 mode)
of the NPort IA5150A series.
Before you start to configure the NPort IA5000A via serial console, turn off the power and connect the serial
cable from the NPort IA5000A to your computer’s serial port.
1. Connect the NPort IA5000A’s serial port 1 directly to your computer’s male RS-232 serial port.
From the Windows desktop click on Start Programs PComm Lite Terminal Emulator.
2. When the PComm Terminal Emulator window opens, first click on the Port Manager menu item and select
Open, or simply click on the Open icon.
3. The Property window opens automatically. From the Communication Parameter page, select the
appropriate COM port for the connection, COM1 in this example, and 19200 for Baud Rate, 8 for Data Bits,
None for Parity, and 1 for Stop Bits.
4. From the Property window’s Terminal page, select ANSI or VT100 for Terminal Type and then click OK.

NPort IA5000A Series Initial IP Address Configuration
3-7
5. If you select Dumb Terminal as the terminal type, some of the console functions—especially the “Monitor”
function—may not work properly.
6. Press the “ ` ” key continuously and then power on the NPort IA5000A.
7. NPort IA5000A will automatically switch from data mode to console mode as it receives a continuous string
of “ ` ”.
8. Input the password when prompted. Note that this page will only appear when the NPort IA5000A has been
set up for password protection.