MPFiltri ICM User manual

ICM-
CANBUS
Inline Contamination Monitor
CAN-Bus Guide
200.072-EN
www.mpfiltri.co.uk


Introduction 3
1 Introduction
1.1 Overview
1.2 CAN-bus Standards
1.3 Installation Outline
•
•

4 Introduction
•
•
•
•

Electrical Connection 5
2 Electrical Connection
Figure 1 ICM Electrical Connection
•
•
• requires
•

6 Electrical Connection
•

Configuration 7
3 Configuration
3.1 Use PC Software for Configuration
Figure 1 Communication Settings
dialogue
3.2 CAN 2.0B and J1939

8 Configuration
At the end of each test, the ICM will generate a ``test result codes’’ message using
the selected CAN-bus identifier.
3.3 CAN 2.0A and CanOpen

CAN-bus Operations 9
4 CAN-bus Operations
4.1 CAN-bus Settings
4.2 Operation

10 CAN-bus Operations

Example Walk-through
Figure I PCAN-USB CAN-bus to USB Adaptor
Equipment Required
•
•
•
•
•
•

Figure II Connecting the ICM to the PCAN-USB Adaptor
Initial Configuration
•
•
•
•
•
•

Suggested General Settings
Figure III General Settings
•
•
•
•
•
Suggested Communication Settings

Figure IV Communication Settings
•
•
•
•
•
•

PCAN-USB Software
Figure V PCAN-View Connect dialogue
Simulated Tests

Figure VI PCAN-View Main Screen
Figure VII Reception of a Test Result Codes
Message

Messages
CAN2.0B and J1939
control
J1939 Parameters
Table I CAN-bus Parameters for J1939 Interoperation
Non-J1939 CAN2.0B Users
•
•

CAN2.0A and CanOpen
CAN-bus Message List
Table II CAN-bus Messages

Message: Result Codes
in the selected Test Format (ISO4406,
NAS1638 etc)
Special Values

Message: Status
Byte Bit Length Type Item
1-4 1 32 unsigned Test Number
5 1 8 unsigned Status code
6 1 8 unsigned Completion
7-8 1 16 bitmask Status Flags
Test Number
Status Code
Completion
Status Flags
Table of contents
Other MPFiltri Measuring Instrument manuals
Popular Measuring Instrument manuals by other brands

LumaSense
LumaSense 320 Series user manual

BEKA
BEKA BA307E instruction manual

ZURN
ZURN AquaSense AV ZEMS Series Installation, operation, maintenance and parts manual

Rhopoint Instruments
Rhopoint Instruments Novo-Curve 4 operating instructions

LEMIS
LEMIS DM-250.1 Series owner's manual

YOKOGAWA
YOKOGAWA 2041 user manual