MPP Solar PIM-1012 24C User manual

IF THE TOTAL WATTS OF ELECTRICAL APPLIANCES EXCEEDS
THE OUTPUT CAPACITY OF INVERTER. OR AFTER OPERATING
FOR A PERIOD OF TIME. IF THE TEMPERATURE OF THE
INVERTER REACHES 60 ℃
℃℃
℃, THE INVERTER SHALL BE
REDUCED AC OUTPUT BY THE PROTECTION CIRCUIT.
0
00
0
60 C
.
CAUTION
* ALWAYS PLACE THE INVERTER IN
AN ENVIRONMENT WHICH IS :
( A ) WELL VENTILATED
( B ) NOT EXPOSED TO DIRECT
SUNLIGHT OR HEAT SOURCE
( C ) OUT OF REACH FROM CHILDREN
( D ) AWAY FROM WATER/MOISTURE,
OIL OR GREASE
( E ) AWAY FROM ANY FLAMMABLE
SUBSTANCE
※
※※
※WARNING※
※※
※FLUORESCENT LAMP
DO NOT USE THIS DEVICE WITH FLUORESCENT LAMPS.
BALLASTS
Glow switch
Lamp
AC IN
Power Factor
Capacitor
ab
8
FULL AUTOMATIC DC-AC 1000W
INVERTER & BATTERY CHARGER
DC12V or 24V to AC220V~240V Instruction Manual
Please read user manual before use.
1

USEFUL APPLICATIONS
RUN NOTEBOOK COMPUTERS, RADIOS, TVS, VCRS,
LAMPS, FANS, FAX, DRILL, . . . . . . ETC.
SPECIFICATION
INPUT VOLTAGE RANGE : DC 10~15V (12V) // DC 20~30V (24V)
INPUT FULL LOAD CURRENT : 100A (12V) // 50A (24V)
STANDBY INPUT CURRENT : <0.4A (12V) // <0.3A (24V)
OUTPUT VOLTAGE (AC) : 220V~240V
OUTPUT WAVEFORM : MODIFY SINEWAVE
OUTPUT FREQUENCY : 50Hz or 60Hz
CONTINUE OUTPUT POWER : 1000W
PEAK OUTPUT POWER : 2400W
EFFICIENCY : 85~90%
BATTERY LOW PRE-ALARM : 10.5 ± 0.5V (12V) // 21 ±0.5V (24V)
BATTERY LOW SHUTDOWN : 10 ± 0.5V (12V) // 20 ±0.5V (24V)
THERMAL PROTECT : 60 ±5℃
℃℃
℃(MICROCONTROLLER )
AUTO-OPERATION FAN (TEMPERATURE OR LOAD)
OVERLOAD PROTECT : YES (MICROCONTROLLER )
OUTPUT SHORT PROTECT : YES ( MICROCONTROLLER )
BATTERY EX. 12V / 24V PROTECT : YES ( MICROCONTROLLER )
BATTERY POLARITY PROTECT : YES (BY FUSE )
FUSE : 25A*6PCS (12V) // 15A*6PCS (24V)
TRANSFER TIME : 16m SEC
CHARGER CURRENT : MAX. 10A (12V) // 5A (24V)
DIMENTION ( L*W*H) mm : 360*198*80
WEIGHT : 3.8Kg
2
BATTERY LED DARK/LIGHT INDICATIVE CHART.
12V 13.5V
A
14.5V13V12.5V
BATTERY
LED
LIGHT
BATTERY
LED
BLINKS
BATTERY
LED
LIGHT
BATTERY
LED
LIGHT
14V
:CHARGER CURRENT
(24V)
0A
5A
4A
3A
2A
1A
7A
6A
8A
10A
9A
0A
2.5A
2A
1.5A
1A
0.5A
3.5A
3A
4A
5A
4.5A
(24V)
(28V)(27V)(26V)(25V) (29V)
V 0.4(24V)
V 0.2(12V)
INDICATING SIGN
NORMAL LIGHTED LED : POWER SWITCH “ ON ” , INVERTER STANDBY
NORMAL UNLIGHTED LED : POWER SWITCH “ OFF ”
CHARGER LIGHTED LED : BATTERY CHARGING
CHARGER LED BLINKS : FULL BATTERY
NORMAL
ON
CHARGER
ON
OFF
OVERLOADOVERTEMP
NORMAL
CHARGER
AC OUTPUT
AC
OUTLET
7

※ CHARGER
CONNECT AC INPUT POWER CORD TO HOME MAIN
SOCKET THEN USE RED BATTERY CORD TO CONNECT (+)
OF DC BATTERY TO (+) SINDING POST.AND USE BLACK
BATTERY CORD TO CONNECT (-) BATTERY TO (-) SINDING
POST.
BATTERY
HOME MAIN SOCKET
ON
OFF
OVERLOADOVERTEMP
NORMAL
CHARGER
AC OUTPUT
O/P:230VAC/50Hz
AC
OUTLET
POWER SWITCH ON POWER SWITCH OFF
OFF
ON
SLOWLY
CHARGING
QUICK
CHARGING
6
POWER SWITCH AC OUTPUT SOCKET
OVERLOAD
OVERTEMP
NORMAL
ON
OFF
AC OUTPUT
O/P:230VAC/50Hz
TERMINAL FAN
TERMINAL
(BLACK)
(RED)
AC
FUSE
CHARGE AC
INPUT SOCKET
CHARGER AC
OUTLET
CAUTION : DO NOT REVERSE INPUT. USE RED BATTERY CORD TO
CONNECT (+) OF A DC BATTERY TO (+) TERMINAL. AND THEN, USE
BLACK BATTERY CORD TO CONNECT (-) BATTERY TO (-) TERMINAL.
AC
FUSE BATTERY
BLACK
RED
WARNING SIGNAL
LOW BATTERY PRE-ALARM BI---------BI---------BI
OVER HEATING PRE-ALARM BI---BI---BI---BI---BI
OVER LOAD PRE-ALARM BI-BI-BI-BI-BI-BI-BI
3

※ USE INVERTER
STEP1:
SET THE POWER SWITCH AT THE OFF
ON
OFF
ON
OFF
OVERLOADOVERTEMP
NORMAL
CHARGER
AC OUTPUT
O/P:230VAC/50Hz
AC
OUTLET
STEP2:
WHEN CONNECTED TO ANY APPLIANCE, BE SURE TO
TURN ON INVERTER FIRST. AND THEN, TURN ON THE
POWER SWITCH OF THE APPLIANCE.
TURN ON
SECONDLY
TURN ON
FIRSTLY
ON
OFF
OVERLOADOVERTEM P
NORMAL
CHARGER
AC OUTPUT
DO NOT USE THE INVERTER EXCEED ITS MAXIMUM OUTPUT POWER,
WHEN CONNECTED TO ANY APPLIANCE. MAKE SURE THE TOTAL
STARTING POWER CAPACITY DOES NOT EXCEED THE MAXIMUM
OUTPUT POWER OF THE INVERTER.
BATTERY
ON
OFF
OVERLOADOVERTEMP
NORMAL
CHARGER
AC OUTPUT
4
※ AS UPS
IF YOU WANT TO USE THIS UNIT AS U.P.S. FUNCTION , TURN ON
THE SWITCH OF THE INVERTER AT FIXED POSITON FIRSTLY.
WHEN THE BLACK OUT OCCURS IN THE MEANTIME, THE INVERTER
WILL DIVERT AUTOMATICALLY FROM HOME ELECTRICITY INTO THE
BATTERY TO SUPPLY THE POWER FOR APPARATUS USE
CONTINUALLY.
ON
OFF
BATTERY
HOME MAIN SOCKET
ON
OFF
OVERLOADOVERTEMP
NORMAL
CHARGER
AC OUTPUT
5