mShield mVISOR7001 User manual

User manual v1.0
5
4
1
2
3
A SS E M B LY
INSTRUCTIONS
user manual
mVISOR7001
FACE SHIELD

USER MANUAL
Designated use
mVisor 7001 is a protective face shield that offers approved protection
against droplets and liquid splashes. It should be used in environments
where the user is exposed to liquid splashes and/or droplet infection.
The product may only be used in accordance with this user manual.
After assembling (see front) mVisor 7001
PUT ON THE FACE SHIELD Wear plastic gloves. Place the head strap over
and around your head and adjust until it ts the contours of your head.
Important: Always check that mVisor 7001 is securely in place before
work begins.
REMOVE THE FACE SHIELD To remove without the risk of infecting your
hands or face: Put on plastic gloves. Hold the buckle at the back of your
head, pull out gently and remove the face shield by pulling it forward.
Avoid touching the front of the face shield. Clean the face shield
according to the instructions.
Care and cleaning
1. Disinfect your hands with hand sanitizer
2. Put on protective gloves
3. Disinfect and clean the shield and head strap with soap and
water or surface disinfectant
4. Hang up or put the face shield in a place where it can dry,
or wipe with a surgically clean disposable wipe
5. When dry and disinfected, store the face shield in a clean
plastic bag or original packaging before reuse
This product has been
manufactured in compliance
with Regulation (EU) 2016/425,
the applicable requirements of
standard EN 166:2001, certicate
No. 20/3121/00/0161 issued by
AITEX, Plaza Emilio Sala No. 1, Alcoi,
Spain, Notied Body 0161.
User manual v1.0
Technical specication
Lens Adjustable head strap Foam
Thickness: 1,8 mm Thickness: 1,2 mm Thickness: 30 mm
Length: adjustable 219 mm Width: 25 mm Width: 30 mm
Weight: 146 gr Weight: 24,2 gr Length: 200-330 mm
Material: polycarbonate, PC Material: polypropylene, PP Weight: 6,2 gr
Material: BPI PolyEther+PolyEster
mVisor 7001 can be used for as long as the shield provides good visibility and is undamaged.
Regularly check that the head strap and lens are free from cracks.
Contact
mShield | Anders Anderssons väg 12, 285 35 | Markaryd, Sverige | [e-mail] | [phone]
Documentation available for download
Please visit: mshield.se/docs