MshOt MG-120 User manual

Guangzhou Micro-shot Technology Co., Ltd
MG-120
Four channels LED light source
User manual
Add：Rm A-506,Vanke Cloud,1933 Huaguan Road,Tianhe District,
Guangzhou,China
Web：http://www.m-shot.com
Tel：[phone]

Four channels LED light source
MG-120

User manual of four channels light source MG-120
Web ： www.mshot.com I
Thank you very much for purchasing our products
This instrument is a precision optical instrument, although our products are designed to
meet the highest safety requirements. However, improper use or neglect of this manual
may cause personal injury and property damage. For your safety, you should ensure the
useful life of the instrument and proper daily maintenance. Please read this manual
carefully before using the instrument.
Attention
In this manual, safety hints are indicated by the following symbols. Be sure to follow
the hints of the following symbols to ensure correct and full operation.
Ignoring this symbol may result
in personal injury or damage to
the instrument.
Pay attention to environmental
protection.
Ignoring the hint of this
symbol may affect the
microscope observation.
Caution
Tips for users of microscope
operating skills.
Tips

User manual of four channels light source MG-120
Hot line ： 4008801910 II Web ： www.mshot.com
Safety warning
1. Decomposition is strictly prohibited
Except for the removable parts mentioned in this manual, it is strictly
forbidden to disassemble other parts. Failure to do so may degrade instrument
performance, cause electric shock, injury, and damage to the instrument. In case of any
malfunction, please contact the supplier.
2. Input voltage
Please make sure the input voltage is consistent with the power supply
voltage in your area. If not, do not use the product and contact the
supplier. Using the wrong input voltage for the product can cause a short circuit or fire,
which can damage product performance.
3. Needs to be resistant to high temperature, moisture and rarity
Please do not use it in high temperature and humid environment for a
long time to avoid short circuit or other failures. The suitable working
environment temperature is 10°C~30°C, and the relative humidity is 20%~80% (at
25°C).
4. Place
Please consider the following conditions when choosing a place of use to
avoid adverse effects on its accuracy：
※. Avoid placing it in direct sunlight, vertically under indoor lighting, and other bright
places.
※. Do not place the product in a place with high temperature, humidity and dust
accumulation for a long time to avoid fogging or mold on the glass surface, dust
accumulation, etc., which will damage the coated glass layer and shorten its service
life.
5. Instrument handling
Handling precision optical instruments should careful to avoid damage
Caution
Caution

User manual of four channels light source MG-120
Web ： www.mshot.com III
caused by strong impacts and rough handling.
6.Environmental protection
Please sort and properly dispose of the waste generated during packaging and
use, such as cartons, foam, plastic, lights, batteries, etc.

User manual of four channels light source MG-120
Web ： www.mshot.com V
CONTENT
Ⅰ. Product introduction.......................................................................................................1
Ⅱ. Product composition....................................................................................................... 1
Ⅲ. Touch controller connector.............................................................................................2
Ⅳ. Controller interface.........................................................................................................3
Ⅴ. Zoom setting.....................................................................................................................4

User manual of four channels light source MG-120
Web ： www.mshot.com 1
Ⅰ. Product introduction
MSHOT four-channel light source MG-120, using an array light source distribution,
comes standard with four broad-spectrum light sources, supports DAPI, FITC, GFP, FAM,
Cy3, TxRed, Cy5 and other conventional fluorescence applications, supports wavelength
customization, and meets all kinds of scientific research need.
Ⅱ. Product composition
①.LED light source
②.Touch controller
③.Power supply

User manual of four channels light source MG-120
2Web
： www.mshot.com
Ⅲ. Touch controller connector
①Switch: ON/OFF
②Power connector:120W, 12VDC IN
③LED connector：Connect the LED light source
④USB plug:connect to a computer and control it through software
⑤BNC interface: Four independent (R\G\B\UV) external trigger signal inputs.

User manual of four channels light source MG-120
Web ： www.mshot.com 3
Ⅳ.Controller interface
①.Mode selection：
Continuous mode - 0-100% dimming.
PULSE mode - external trigger pulse dimming, need to connect TTL signal through
BNC interface.
②.On/off switch.
③. Brightness display/setting: touch to make the keyboard pop up and enter the
brightness ratio.
④.Brightness slider bar: touch and drag the slider bar to adjust the brightness ratio.
⑤.Temperature display
⑥.Humidity display
⑦.Date display

User manual of four channels light source MG-120
4Web
： www.mshot.com
Ⅴ.Zoom settings
①.Zoom ring: The lamp head has a zoom device, and the focal length of the lens
can be adjusted by rotating the zoom ring to achieve 4-9° zoom.
② .Rotate up, the light spot becomes smaller, and rotate down, the light spot
becomes larger.
Up
Down
Light outlet

User manual of four channels light source MG-120
Web ： www.mshot.com 5
Note: The light source imaging may occur during zoom adjustment. At this time, it
needs to be adjusted according to the illumination distance and the size of the object
to be illuminated until the light spot is uniform.