mtts Impala Ventilator User manual

Stand Assembly Instructions
STEP 1 - Remove components from the box
V.0.01.EN
Impala Ventilator. Stand Assembly Instructions.
STEP 2 - Attach Stand to Base STEP 3 - Attach Basket
x 1 Base
x 1 Stand
x 1 Basket
x 1 Device Holder
x 1 Oxygen Cylinder Holder
x 1 Supporting Arm
x 1 Impala Control Unit
x 3 Bolt M5x15 (Base)
x 2 Bolt M5x15 (Basket)
x 3 Bolt M5x10 (Device)
x 2 Bolt M10x30 (Oxygen)
Refer to User Manual for comprehensive information:
http://www.mtts-asia.com/impala-ventilator/
Impala
ventilator

V.0.01.EN
Impala Ventilator. Stand Assembly Instructions.
STEP 8 - Plug in and power up
STEP 4 - Attach Device Holder STEP 5 - Attach Oxygen Cylinder Holder
STEP 6 - Attach Supporting Arm STEP 7 - Attach Impala Control Unit
Refer to User Manual or Reprocessing Guide for instructions on breathing
circuit assembly