mtts Koala User manual

Koala. User manual
User Manual
Effective date: January 2021
Issue Number: 01 Verson 01 EN
Issue Date: January 2021 www.mtts-asia.com
Medical Device: Infant Bed
Commercial Name: Koala Infant Bed
Model/Type: Koala
infant bed
Koala

V-1-01-EN
Koala. User manual
Contents
Company Information
Introduction
Device Description
Warnings
Setting up Warmer
Cleaning
Maintenance

Explanation of Symbols
Warranty Policy
04
05
06
07
10
12
14
16
18
19
03

V-1-01-EN
Koala. User manual
The Koala infant bed has a simple hand-crank system designed on the principle of

The four wheels can be rotated 360 degrees and locked to easily move and brake
when needed
The crib edges of the bed are made of transparent Mica material and angled to help
easily observe the patient inside and avoid injury to the patient.
Introduction
05
Company Information
04
MEDICAL TECHNOLOGY TRANSFER AND SERVICES Co., LTD
House No. 26, Alley 41, An Duong Vuong Street, Tay Ho District, Hanoi City, Vietnam
Tel: [phone]
Fax: [phone]
Email: assistanc[email protected]om
www.mtts-asia.com
PROMETEO SRL
Via Mantova 9
38122 Trento
Italy
This user manual is intended for health care professionals.
WARNING - a warning statement refers to the conditions when the possibility
of injury to the patient or user exists if a procedure is not followed correctly.
NOTE - a note statement provides additional information intended to clarify
points, procedures or instructions.

V-1-01-EN
Koala. User manual
06
Device Description
Overview
Lockable Castors
Side Panels
IV Pole*
Mattress
Storage Shelf*
X-ray Tray
Base
* Optional accessories
07
Warnings


Do not operate the device if any of the components appear to be damaged or
broken. Damaged or broken components should be discarded and replaced.
Do not modify this equipment without authorization of the manufacturer.
Overloading the shelves may affect the stability of the bed.
Lock the front wheels before changing the angle of the bed.
User and Patient Safety

V-1-01-EN
Koala. User manual
Device
Ensure the bed is level and side panels are locked into position before
transport.
Do not move the bed by pushing or pulling on the bed side panels. This
action may lead to the deterioration and breakage of the components that act
as a safety barrier around the baby.
Inspect all the tubes and wires connected to the baby before and after tilting
the bed. Tilting or moving the warmer bed can pull on tubing or leads.
Do not use the bed without the mattress.
Ensure the patient and operator limbs are clear of bed side panels when
opening and closing.
Do not leave the baby unattended in the bed when the side panels are
folded down.
Do not lean on the bed.
Take care not to dislodge tubes and lines when opening or closing side
panels.
Regularly check side panels are securely locked in the vertical position.
Warnings
08
Bed Loadings
Maximum bed loading is 10kg.
Do not exceed maximum total storage shelf of 5kg.
Cleaning and Maintenance

procedures.
Warnings
09

V-1-01-EN
Koala. User manual
Setting up Bed
STEP 1 - Remove components from the box
STEP 2 - Attach Stand to Base
1
2
3
Two people might be required to perform this step
10
11
Setting up Bed
STEP 7 - Attach 3 remaining Side Panels to Bed
1
STEP 3 - Attach Control Unit to and
Hand Crank to Stand
Attach only side panel that is closest to
the Control Unit in this step.
Remaining panels will be attached in STEP 7.
1
1
2
STEP 5 - Attach Side Panel to Bed STEP 6 - Attach Bed
1
21
STEP 4 - Attach storage shelves
x 1 Base
x 1 Stand
x 1 Stand plastic frame
x 1 Control unit
x 1 Bed with X-ray tray
x 2 Side Panel 54cm
x 2 Side Panel 64cm
x 1 Bed Mattress
x 1 Storage Shelf
x 4 Bolt M10x80
x 4 Bolt M10x25
x 1 Bolt M10x120 + 2 Nuts
x 1 Bolt M10x60 + 1 Nut

V-1-01-EN
Koala. User manual
Cleaning
12
General
Clean Koala Infant Bed and accessories either weekly or between patients using
the following cleaning procedures:
Comply with hospital, local and national guidelines for product cleaning fre-
quencies.
Cleaning shall be performed at ambient conditions. Allow heated surfaces to
cool for at least one hour or cool to the touch before cleaning.
Before cleaning, remove and discard all used disposable products using rec-
ommended method of disposal.
Dust all surfaces with clean damp soft cloth.
-
ter) ensuring the manufacturer’s directions for use of the cleaning agent are
followed.
Dry all the surfaces after cleaning with a clean soft cloth or paper towel.
Ensure that no part of the device or related accessories is immersed in any
cleaning liquid or cleaning solution.
Do not use abrasive cleaning solutions.
Ensure all Koala Infant Bed parts and accessories are checked before return-
ing the device to service.
Mattress
1. Clean the mattress with an approved and correctly diluted disinfectant-detergent
solution, ensuring the manufacturer’s directions for use of the cleaning agent are
followed.
2. Apply the cleaning solution with clean cloth or sponge, and dry all surfaces after
cleaning with a clean soft cloth or paper towel.
Do not autoclave the mattress.
Cleaning
13

V-1-01-EN
Koala. User manual
Maintenance
-
dures.
After the maintenance is completed, ensure the equipment is functioning cor-

Ensure only approved replacement parts are used during service and mainte-
nance procedures.
Please contact an authorised MTTS representative for further assistance with
any servicing or maintenance requirement.
Bed and X-ray tray
Bed should be checked annually to ensure reliable operation. The following proce-
dure should be used by your technician:
1. Check each bed side panel for smooth operation and correct latching. Replace if
defective.
2. Check X-ray tray module for smooth operation and correct placement of X-ray
cassette. Replace if defective.
3. Check the operation of the tilt mechanism for smooth movement and that appro-
priate resistance can be felt.
4. Check that M6x120 bolt, which the bed pivots on is not loos. Tighten if necessary.
14
Base
The base should be checked at least annually to ensure reliable operation. The fol-
lowing procedure should be used by your technician:

2. Check castors rotate freely and castor brakes operate correctly.
Maintenance
15

V-1-01-EN
Koala. User manual
Specications

Total unit mass
Shipping weight
Maximum load
Mattress
Bed tilting positions
Castors
Monitor / Storage tray
X-ray cassette
94.5 cm x 55 cm x 110cm
44 kg
55 kg
20 kg
Waterproof PU
22kg/m3
54 x 64 x 3 cm
-12oto +12o
4 x 100mm, all locking
30 x 20 cm
26 x 70 cm
1 mm

16
Material
Foam Denisty
Size
Size
Thickness
Operating
Transport and storage
Exclusions
Ambient temperature 10°C to 40°C

Atmospheric Pressure: 70-106kPa
Ambient temperature 0°C to +50°C

Atmospheric Pressure: 70-106kPa
None

Specications
17

V-1-01-EN
Koala. User manual
Explanation of Symbols
Do not disassemble Wallaby Warmer unless you are an
MTTS trained technician or have been instructed to by

Device manufacturer.
Date of manufacture.
CE Marking
Keep out of direct sunlight.
This device should be disposed of separately from normal
household waste so that components can be recycled.
Refer to User Manual before operating this device.
IPX0 
Serial Number
Maximum load.
18
Name and address of European Authorized Representative
Warranty Policy
General Terms
This MTTS Limited Warranty gives you, the customer,
express limited warranty rights from MTTS, the manu-

Please refer to the MTTS Website for an extensive de-
scription of your limited warranty entitlements. In addi-
tion, you may also have other legal rights under applica-
ble law or special written agreement with MTTS.
MTTS MAKES NO OTHER EXPRESS WARRANTY OR
CONDITION WHETHER WRITTEN OR ORAL AND MTTS
EXPRESSLY DISCLAIMS ALL WARRANTIES AND CON
DITIONS NOT STATED IN THIS LIMITED WARRANTY.
TO THE EXTENT ALLOWED BY LOCAL LAW OF JURIS
DICTIONS OUTSIDE VIETNAM, MTTS DISCLAIMS ALL
IMPLIED WARRANTIES OR CONDITIONS, INCLUD
ING ANY IMPLIED WARRANTIES OF MERCHANTABIL
ITY AND FITNESS FOR A PARTICULAR PURPOSE. FOR
ALL TRANSACTIONS OCCURRING IN VIETNAM ANY
IMPLIED WARRANTY OR CONDITION OF MERCHANT
ABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A
PARTICULAR PURPOSE IS LIMITED TO THE DURATION
OF THE EXPRESS WARRANTY SET FORTH ABOVE. SOME
COUNTRIES DO NOT ALLOW A LIMITATION ON HOW
LONG AN IMPLIED WARRANTY LASTS OR THE EXCLU
SION OR LIMITATION OF INCIDENTAL OR CONSEQUEN
TIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH
COUNTRIES, SOME EXCLUSIONS OR LIMITATIONS OF
THIS LIMITED WARRANTY MAY NOT APPLY TO YOU. FOR
CONSUMER TRANSACTION, THE LIMITED WARRANTY
TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO
THE EXTENT LAWFULLY PERMITTED, DO NOT EXCLUDE,
RESTRICT, OR MODIFY BUT ARE IN ADDITION TO THE
MANDATORY STATUTORY RIGHTS APPLICABLE TO THE
SALE OF THIS PRODUCT TO YOU.
This Limited Warranty is applicable in all countries and
may be enforced in any country or region where MTTS or
its authorized service providers offer warranty service for
      
and conditions set forth in this Limited Warranty)
Under this Limited Warranty, products purchased in one
country or region may be transferred to another country
or region where MTTS or its authorized service provid-
ers offer warranty service for the same product model
number. Warranty terms, service availability, and service
response times may vary from country or region to coun-
try or region. Standard warranty service response time is
subject to change due to local parts availability. If so, your
MTTS authorized service provider can provide you with
   
MTTS product to make it operate in a country for which
it was never intended to function for legal or regulatory
reasons. MTTS is not responsible for any tariffs or duties
that may be incurred in transferring the products.
MTTS guarantees that the product that you have pur-
chased or leased from MTTS is free from defects in ma-
terials or workmanship under normal use during Lim-
ited Warranty Period. The Limited Warranty Period starts
on the date of purchase or lease from MTTS, or from
the date MTTS completes installation. Your dated sales
or delivery receipt, showing the date of purchase of the
product, is your proof of the purchase or lease date. You
may be required to provide proof or purchase or lease as
a condition of receiving warranty service. You are entitled
to hardware warranty service according to the terms and
conditions of this document if a repair to your MTTS prod-
uct is required within the Limited Warranty Period.
Unless otherwise stated, and to the extent permitted by
local law, new MTTS product may be manufactured using
new materials and used materials equivalent to new in
performance and reliability. MTTS may repair or replace

or parts equivalent to new in performance and reliability,

has been discontinued. Replacement parts are warrant-
ed to be free from defects in material or workmanship for

Period of the MTTS product they are replacing or in which
they are installed, whichever is longer.
19

V-1-01-EN
Koala. User manual
Warranty Policy
MTTS will, at its sole discretion, repair or replace any
components or product that manifests a defect in materi-
als or workmanship during the Limited Warranty Period.
All component parts removed under this Limited War-
ranty become the property of MTTS. In the unlikely event
that your MTTS product has recurring failures, MTTS at
          
replacement unit selected by MTTS that is the same or
        
to give you a refund of your purchase price or lease pay-
  
your exclusive remedy for defective products.
Exclusions
MTTS DOES NOT WARRANT THAT THE OPERATION OF

FREE. MTTS IS NOT RESPONSIBLE FOR DAMAGE THAT
OCCURS AS RESULT OF YOUR FAILURE TO FOLLOW THE
INSTRUCTIONS INTENDED FOR THE PRODUCT.
This Limited Warranty does not apply to expendable or
consumable parts and does not extend to any product
from which the serial number has been removed or that

of accident, misuse, abuse, contamination, improper or
      

parameters stated in the user documentation shipped
        
-
-

        

replaceable MTTS or MTTS approved parts if available for
your MTTS product in the servicing country or region.
Limitation of Liability
IF YOUR MTTS PRODUCT FAILS TO WORK AS WARRANT
ED ABOVE, THE MAXIMUM LIABILITY OF MTTS UNDER
THIS LIMITED WARRANTY IS EXPRESSLY LIMITED TO
THE LESSER OF THE PRICE YOU HAVE PAID FOR THE
PRODUCT OR THE COSTS OF REPAIR OR REPLACE
MENT OF ANY HARDWARE COMPONENTS THAT MAL
FUNCTION IN CONDITIONS OF NORMAL USE.
EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL MTTS
BE LIABLE FOR ANY DAMAGES CAUSED BY THE PROD
UCT OR THE FAILURE OF THE PRODUCT TO PERFORM,
INCLUDING ANY LOST PROFITS OR SAVINGS OR SPE
CIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
MTTS IS NOT LIABLE FOR ANY CLAIM MADE BY A THIRD
PARTY OR MADE BY YOU FOR A THIRD PARTY.
THIS LIMITATION OF LIABILITY APPLIES WHETHER
DAMAGES ARE SOUGHT, OR CLAIM MADE, UNDER THIS
       

CONTRACT CLAIM, OR ANY OTHER CLAIM. THIS LIMITA
TION LIABILITY CANNOT BE WAIVED OR AMENDED BY
ANY PERSON. THIS LIMITATION OF LIABILITY WILL BE
EFFECTIVE EVEN IF YOU HAVE ADVISED MTTS OF THE
POSSIBILITY OF ANY SUCH DAMAGES. THIS LIMITATION
OF LIABILITY, HOWEVER, WILL NOT APPLY TO CLAIMS
FOR PERSONAL INJURY.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT MAY
VARY FROM COUNTRY TO COUNTRY. YOU ARE ADVISED
TO CONSULT APPLICABLE COUNTRY LAWS FOR A FULL
DETERMINATION OF YOUR RIGHTS.
20
Warranty Policy
Limited Warranty Period
The Limited Warranty Period for this MTTS product is a
        -

your sales receipt is the date of purchase unless MTTS or
your reseller informs you otherwise in writing.
Customer Responsibilities
In order to avoid the risk of charges for issues not cov-

defects in materials and workmanship on MTTS product),
you will be asked to assist MTTS as follows:
Contacting MTTS
If your MTTS product fails during the Limited Warranty
Period and the suggestions in the product documentation
do not solve the problem, you can receive support by do-
ing one of the following:
-
stall software patches, run MTTS diagnostics and
utilities;
Implement temporary procedures or workarounds
provided by MTTS while MTTS works on permanent
solution;
Cooperate with MTTS in attempting to resolve the
problem using online chat, email, or telephone. This
may involve performing routine diagnostic procedures,
installing additional software updates or patches;

of warranty service provided by MTTS and any other
actions that MTTS may reasonably request in order to
best perform the warranty support
Locate and contact your nearest MTTS service pro-
vider via MTTS website:
http://www.mtts-asia.com/support/
Call the Technical Support Centre:
[phone]
-
-
Before calling MTTS or an MTTS authorized service pro-
vider please have the following information available:
Product serial number and model name
Applicable error messages
Detailed questions
-
-
-
CUSTOMER IS RESPONSIBLE FOR DELIVERING THE
  
CATION TO THE MTTS AUTHORIZED SERVICE POINT.
21
-
-
-
-

V-1-01-EN
Koala. User manual
MEDICAL TECHNOLOGY TRANSFER AND SERVICES Co., LTD
House No. 26, Alley 41, An Duong Vuong Street, Tay Ho District, Hanoi City, Vietnam
PROMETEO SRL
Via Mantova 9
38122 Trento
Italy
Tel: [phone]
Fax: [phone]
Email: assistanc[email protected]
www.mtts-asia.com