MUNBYN IPDA051 User manual

Mobile Data Terminal
IPDA051 User Manual

1
Contents
Chapter 1 Product Introduction....................................................................................................2
1.1 Brief Introduction................................................................................................................. 2
1.2 Precaution Before Using Battery.......................................................................................3
1.3 Charger................................................................................................................................. 3
1.4 Notes..................................................................................................................................... 4
Chapter 2 Installation Instructions............................................................................................... 5
2.1 Appearance.......................................................................................................................... 5
2.2 Install Micro SD and SIM Cards........................................................................................6
2.3 Battery Charge.....................................................................................................................6
2.4 Buttons and Function Area Display.................................................................................. 6
Chapter 3 Call Function................................................................................................................ 7
3.1 Calling Numbers.................................................................................................................. 7
3.2 Contacts................................................................................................................................7
3.3 SMS and MMS.....................................................................................................................7
Chapter 4 Barcode Reader-writer............................................................................................... 8
Chapter 5 Infrared Read-write Function..................................................................................... 9
Chapter 6 RFID Reader..............................................................................................................10
6.1 UHF..................................................................................................................................... 10
Chapter 7 Other Functions......................................................................................................... 11
7.1 PING Tool...........................................................................................................................11
7.2 Bluetooth.............................................................................................................................12
7.3 GPS..................................................................................................................................... 13
7.4 Volume Setup.................................................................................................................... 14
7.5 Sensor.................................................................................................................................15
7.6 Keyboard............................................................................................................................ 16
7.7 Network...............................................................................................................................17
7.8 Keyboard Emulator (optional)......................................................................................... 18
Chapter 8 Device Characteristic................................................................................................19

2
Chapter 1 Product Introduction
1.1 Brief Introduction
IPDA051 device is a smart mobile PDA that integrated with various features such as
wireless communication, data acquisition, wireless transmission, data processing and
UHF scanning etc. It is configured with Android 6.0 OS. With a set of advanced data
acquisition options, IPDA051 can be operated in various industries to acquire precise
and abundant datum automatically. Meanwhile, the device can match the options with
staffs accordingly. The corporation which deployed IPDA051 will realize the deployment
work is simple and maintenance work will be remarkably decreased.
IPDA051 is highly rugged, compact and durable. With IP65 water and dust proof
capability, the device has met IEC sealing standard. Therefore, it can be operated by
staffs such as railway inspector, road toll operator, vehicle inspector, delivery postman,
power supply inspector, storage administrator, financial & insurance, police officers,
security tracing etc. Wherever your staff’ locations are, IPDA051 can remain its
connectivity with the system to make sure business in high-effective operating.
IPDA051 mobile data terminal adopted 4G LTE technology to realize multi path
communication and calling function for field work, data exchange efficiency has been
enhanced simultaneously. Therefore, IPDA051 will bring the largest investment return
for enterprises.

3
1.2 Precaution Before Using Battery
When you use IPDA051 for the first time, please make
sure the insulation sticker on the battery has been
removed.
Do not leave battery unused for long time, no matter it is in device or
inventory. If battery has been used for 6 months already, it should be check
for charging function or it should be disposed correctly.
The lifespan of Li-ion battery is around 2 to 3 years, it can be circularly
charged for 300 to 500 times. (One full battery charge period means
completely charged and completely discharged.)
When Li-ion battery is not in used, it will continue discharge slowly.
Therefore, battery charging status should be checked frequently and take
reference of the related battery charging information on the manuals.
Observe and record the information of a new unused and non-fully charged
battery. On the basis of operating time of new battery and compare with a
battery that has been used for long time. According to product configuration
and application program, the operating time of battery would be different.
Check battery charging status at regular intervals.
When battery operating time drops below about 80%, charging time will be
increased remarkably.
If a battery is stored or otherwise unused for an extended period, be sure to
follow the storage instructions in this document. If you do not follow the
instructions, and the battery has no charge remaining when you check it,
consider it to be damaged. Do not attempt to recharge it or to use it. Replace
it with a new battery.
Store the battery at temperatures between 5 °C and 20 °C (41 °F and 68 °F).
1.3 Charger
The charger type is GME10D-050200FGu, output voltage/current is 5V DC/2A. The plug
considered as disconnect device of adapter.

4
1.4 Notes
Note: Using the incorrect type battery has danger of explosion.
Please dispose the used battery according to instructions.
Note: Due to the used enclosure material, the product shall only be connected to a USB
Interface of version 2.0 or higher. The connection to so called power USB is
prohibited.
Note: The adapter shall be installed near the equipment and shall be easily accessible.
Note: The suitable temperature for the product and accessories is 0-10℃to 50℃.
Note: CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.

5
Chapter 2 Installation Instructions
2.1 Appearance

6
Buttons instruction
Button
Description
Side
button
1.Power
Located on left side, press to ON/OFF device.
2.Function key
Located on left side, its function can be defined by software.
3.SCAN
Scanning button located on both sides. There are two scanning
buttons.
Main
button
4.Menu
Display main menu.
5.Home
Touch it back to main screen.
6.Enter
Press to confirm current selection.
7.Backspace
Return to last step to setup.
2.2 Install Micro SD and SIM Cards
The cards sockets are showing as follows:
2.3 Battery Charge
By using USB Type-C contact, the original adaptor should be used for charging the
device. Make sure not to use other adaptors to charge the device.
2.4 Buttons and Function Area Display
IPDA051 has 4 side buttons, 4 main buttons and trigger on pistol, UHF scanning area,
2D scanning module, HD camera and flashlight locate on the top.

7
Chapter 3 Call Function
3.1 Calling Numbers
1. Click icon .
2. Click number key to input phone numbers.
3. Click icon to call.
4. Click icon to end call.
3.2 Contacts
1. Click contacts to open contacts list.
2. Click icon to add new contacts.
3. Click icon to import/export contacts.
3.3 SMS and MMS
1. Click to open message window.
2. Click to input message receiver and contents.
3. Click to send out messages.
4. Click to add attachment pictures and videos.

8
Chapter 4 Barcode Reader-writer
1. In App Center, to open 2D barcode scan test.
2. Press “SCAN” button or click scan key to start scanning, the
parameter “Auto interval” can be adjusted.
Caution: Please scan codes in correct way otherwise the
scanning will be failed.
1D barcode:
2D code:

9
Chapter 5 Infrared Read-write Function
1. Open infrared function in App Center.
2. Click button “Open” to start infrared scanning function. Click
“LED” for infrared scanning aim assist. Depending on different
application status to compile different commands to realize
infrared read and write function.

10
Chapter 6 RFID Reader
6.1 UHF
Click App Center, open “UHF” to read and write, kill and lock UHF tag.

11
Chapter 7 Other Functions
7.1 PING Tool
1. Open “PING” in App Center.
2. Setup PING parameter and select external/internal address.

12
7.2 Bluetooth
1. Open “BT Printer” in App Center.
2. In the list of detected devices, click the device that you want to
pair.
3. Select printer and click “Print” to start printing contents.

13
7.3 GPS
1. Click “GPS” in App Center to open GPS test.
2. Setup GPS parameters to access GPS information.

14
7.4 Volume Setup
1. Click “Volume” in App Center.
2. Setup volume by requirements.

15
7.5 Sensor
1. Click “Sensor” in App Center.
2. Setup the sensor by requirements.

16
7.6 Keyboard
1. Click “Keyboard” in App Center.
2. Setup and test the main value of the device.

17
7.7 Network
1. Click “Network” in App Center.
2. Test WIFI/Mobile signal by requirements.

18
7.8 Keyboard Emulator (optional)
The keyboard emulator can be used in multiple operating background and output
formats directly. And it includes Prefix/Suffix/Enter/TAB.
Notes:
For pistol grip mode
(Quad-core CPU) input 139 and 280 in KeyCode
(Octa-core CPU) input 139 and 293 in KeyCode
Please check Keyboard emulator manual for more details.
https://my.pcloud.com/publink/show?code=XZ0Xox7ZYJBGkKUqTd5uo9Fw50xRAXeJ0wR7
(Pistol setting in keyboardemulator APP)
139 280

19
Chapter 8 Device Characteristic
Physical characteristics
Size
164.2mm*78.8mm*17mm
Weight
<654g(battery included)
Display
5.2 inch，IPS FHD 1920*1080P
Touch panel
4 main keyboards, 1 power button, 2 scan buttons, 1 multi-
function button
Battery
Li-ion, rechargeable, 8000mAh
Expansion
Supports up to 32 GB Micro SD card
Expansion Slot
1 slot for SIM card, 1 slot for SIM or TF card
Audio
speaker, 2 microphones, voice call
Camera
13MP autofocus camera with flashlight
Performance
CPU
Cortex-A53 1.3GHz Quadcore
OS
Andriod 6.0
RAM
2GB RAM
Communication
Interface
USB2.0,Type-C,OTG
ROM
16GB
Max.expansion
Supports up to 32 GB Micro SD card
User environment
Operating temp.
-10℃to 50℃
Storage Temp.
-40℃to 70℃
Humidity
5%RH - 95%RH non condensing
Sealing
IP65, IEC sealing standard
Drop specification
Multiple 1.8m/4.0ft drops to the concrete