Murphy Digital Time Meters HD35-CD User manual

Description
The HD35 Series time meters are low input power, elapsed
time meters that record the operating time of vehicles or
powered equipment. Timing is by highly accurate and
reliable quartz based circuitry. Elapsed time is displayed by
a 5-digit Liquid Crystal Display (LCD) which can read up to
9,999.9 hours. The LCD can be powered by either an
external battery or DC voltage source. An AC line voltage
or a capacitor discharge (CD) ignition can also be used.
The elapsed time is maintained by a replaceable 3-year
lithium battery when power is removed. The HD35-DC
provides backlighting of its LCD display. The backlighting is
powered by a separate DC power source.
Features
Timer initiation begins when external power is applied to
the input terminals and stops when power is removed. The
display can be reset to zero through an external switch
closure; it is also self zeroing at 9,999.9 hours. A winking
display decimal point indicates that the timer is active. The
display remains on when power is removed. Memory is
maintained by the internal battery.
Specifications
Supply Voltage
HD35-DC: 10-48 VDC or 24 VAC
HD35-CD: 120-250 VAC or CD-Ignition 75-280 VDC
Supply Current
HD35-DC: 50 µA @ 10 VDC; 3.5 mA @ 40 VDC
HD35-CD: 53 µA @ 75 VDC; 270 µA @ 280 VDC
Operating Temperature: -4 to 158°F (-20 to 70°C)
Storage Temperature: -85 to 212°F (-65 to 100°C)
Display Light Supply Voltage: 10-48 VDC or 24 VAC
HD-9015B
Revised 08-93
Catalog Section 20
Digital Time Meters
Models HD35-DC and HD35-CD
Dimensions
Duracell PX28L
6 VDC Lithium
Battery (located
under removable
rubber seal)
Mounting
Clamp
3-5/8 in
(92 mm)
Terminal
Screws
3-1/8 in
(79 mm)
Back View
Mounting Hole: 3-7/16 in. (87 mm)
Approximate Weight: 14 oz. (0.4 kg)
Approximate Dimensions: 5-1/2x 5-1/2x 5-1/2in. (140 x 140 x
140 mm)
Side View
•Solid-State
•Memory Retention
• Lighted Liquid
Crystal Display
•Models for Battery,
AC Voltage or CD
Ignition Applications
®
SELECTRONIC®
®
®

1090069
How to Order
Specify:
HD35-CD for 120-250 VAC/CD-Ignition
HD35-DC for 10-40 VDC/24 VAC
Warranty
A two year limited warranty on materials and workmanship
is given with this Murphy product. Details are available on
request and are packed with each unit.
HD35-CD
1. 120-250 VAC; CD ignition power.
2. Terminals 7 and 8 are connected with a factory installed
jumper which initiates a timer immediately after power is
applied between terminals 3 and 4.
To initiate the timer by a remote switch remove the
factory installed jumper between 7 and 8.
3. Connecting terminals 5 and 6 resets the timer to zero.
4. Connect terminal 3 to positive ignition lead.
Connect terminal 4 to negative ignition lead.
5. When replacing battery use only Duracell PX28L
6 VDC Lithium battery. CAUTION: Unless
external power is applied on terminals 3 and 4,
timer will zero when battery is removed.
HD35-DC
1. 10-40 VDC/24 VAC input.
2. Terminals 7 and 8 are connected with a factory installed
jumper which initiates a timer immediately after power is
applied between terminals 3 and 4.
To initiate the timer by a remote switch remove the
factory installed jumper between 7 and 8.
3. Connecting terminals 5 and 6 resets the timer to zero.
4. Connect terminal 3 to power positive.
Connect terminal 4 to power negative.
5. When replacing battery use only Duracell PX28L
6 VDC Lithium Battery. CAUTION: Unless external
power is supplied on terminals 3 and 4, timer
will zero when battery is removed.
6. Display lighting requires 10-40 VDC/24 VAC.
HD35-CD
(2)
5
1
2
3
4
6
7
8
9
Remote
Start
Jumper
(5)
Display
Lighting
(6)
Connect to:
Reset
(3)
CAUTION:
use only to
reset timer
to zero.
(1)
10-40 VDC
or 24 VAC
Input
(4)
Positive and
Negative
Power Source
or *
*
HD35-DC
(2)
Connect to:
Reset
5
1
2
3
4
6
7
8
9
Remote
Start
Jumper
(5)
(3)
CAUTION:
use only to
reset timer
to zero.
(1)
120-250 VAC (4)
Positive or
Negative
Ground CD
Ignition Leads
or
*
*
Typical Wiring Diagrams
WARNING: The wiring diagrams below are
shown for clarity only.
Printed in U.S.A.
®
FRANK W.
MFR.
■ Frank W. Murphy Manufacturer
P.O. Box 470248; Tulsa, Oklahoma 74147; USA
tel. [phone] fax [phone]
e-mail [email protected]
■ Frank W. Murphy Southern Division
P.O. Box 1819; Rosenberg, Texas 77471; USA
tel. [phone] fax [phone]
e-mail [email protected]
Since 1939
■ Frank W. Murphy, Ltd.
Church Rd.; Laverstock, Salisbury SP1 1QZ; U.K.
tel. [phone] fax [phone] tlx 477088
e-mail [e-mail]
■ Frank W. Murphy Pte., Ltd.
26 Siglap Drive; Republic of Singapore 456153
tel. [phone] fax [phone]
e-mail [e-mail]
■ Murphek Pty., Ltd.
1620 Hume Highway; Campbellfield, Vic 3061; Australia
tel. [phone] fax [phone]
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.
■ Murphy de México, S.A. de C.V.
Blvd. Antonio Rocha Cordero 300, Fracción del Aguaje
San Luis Potosí, S.L.P.; México 78384
tel. [phone] fax [phone]
e-mail [email protected]
■ Murphy Switch of California
P.O. Box 900788; Palmdale, California 93590; USA
tel. [phone] fax [phone]
e-mail [email protected]
■ Frank W. Murphy France
tel. [phone] fax [phone]