Murphy MURPHYMATIC AT03069 User manual

AT-04052B page 1 of 2
■
Automatically adjusts engine speed
to meet demands of pressure, level,
load and temperature.
■
Speed changes made slowly and smoothly.
■
Saves fuel, engine wear, horsepower
and labor.
■
Perfect for warm-up and cool-down on auto-
mated systems.
■
One model for both 12 and 24 VDC systems.
Description
The AT03069 is a completely reliable heavy
duty device developed specifically to auto-
matically control engine speed to meet sys-
tem demand. Low current, high torque, solid
state switching and electronic clutch make it
ideal for all automatic and semiautomatic
engine systems. Used with the appropriate
Murphy SWICHGAGE®, near constant
pressure, level and load can be maintained.
Check with our engineers for help with
other applications where speed control can
improve your system.
Applications
Pressure
• City Water Systems.
• Water Flood Injection.
• Sprinkler Lateral Changes.
• Make-up if a “Gang Pump” stops.
• Multiple Hose-reel Irrigation Systems.
Level
• Water or oil storage tanks.
• Waterflood tanks.
• Sewer disposal systems.
• Flood control catch basins.
Temperature
• Multi-engine cooling systems.
• Air conditioned chilled water systems.
Engine load
Empty or fill reservoirs with a lower
horsepower engine—fast when head is
high—slow when head is low.
Specifications
Voltage: 11-28 VDC negative ground.
Maximum Current: 500 mA (1/2 amp).
Standby Current: Approx. 7 mA.
Increase and Decrease: Inputs float at
approx. 8.4 VDC. Grounding inputs causes
8-18 mA of current to flow from either.
Torque: 25 inch pounds.
Sealed limit switches: Factory adjusted,
controls maximum travel.
Linkage adjustment on lever arm—5 holes:
Adjusts travel: 1-3/16 in. (30 mm); 1-11/16
in. (43 mm); 2 in. (51 mm); 2-1/4 in. (57
mm) approximately.
Travel Time: 11 to 20 seconds depending on
the voltage and force applied.
Dimensions: See reverse side.
Net Weight: 5 lb. (2.27 kg)
Features
The AT03069 can enhance features of our
SELECTRONIC®Micro-Controller units
by allowing features such as:
• Warm-up RPM Set point.
• Minimum RPM Set point.
• Maximum RPM Set point.
• Preset Operating RPM Set point.
• Auto Throttling To Match Flows
(as needed in flood control applications).
• Maintaining System Pressure (as needed
in booster station application).
• Adjustable Rate Of Change In RPM
(allowing fine tuning of overall system).
For more information, recommendations
and quotations contact our engineering dept.
Warranty
A limited warranty on materials and workmanship
is given with this FW Murphy product. A copy of
the warranty may be viewed or printed by going to
www.fwmurphy.com/support/warranty.htm
Model AT03069
AT-04052B
Revised 04-04
Replaces AT-98113B
Catalog Section 40
(00-02-0567)
MURPHYMATIC®Engine
Throttle Controller

AT-04052B page 2 of 2
Operation
A Murphy SWICHGAGE®* constantly monitors
pressure, level, temperature or load. Adjustable high
and low contacts on SWICHGAGE®are set slightly
above and below desired operating point. When
demand changes, pointer touches appropriate high
or low contact and signals speed change.
AT03069 controller responds only so long as con-
tact is made. The controller stops immediately when
contacts separate. Slow, smooth action prevents
“hunting” or “surging” on normal applications.
*Mercury tube or snap-action switches are not suitable for this
type control. For more information, recommendations and
quotations contact our engineering dept.
How to Order
AT03069
3-3/4 in.
(95 mm)
12-1/4 in.
(311 mm)
5-1/8 in.
(130 mm)
5-7/8 in.
(149 mm)
3-5/8 in.
(92 mm)
4-3/4 in.
(121 mm)
7/8 in.
(22 mm)
5-1/2 in.
(140 mm)
15 in.
(381 mm)
6-3/4 in.
(171 mm)
Dimensions Typical Wiring
1
Battery
AT03069
SWICHGAGE®
2 3 4
CONTROL SYSTEMS & SERVICES DIVISION
P.O. Box 1819; Rosenberg, Texas 77471; USA
[phone] fax [phone]
e-mail [email protected]
MURPHY DE MEXICO, S.A. DE C.V.
Blvd. Antonio Rocha Cordero 300, Fracción del Aguaje
San Luis Potosí, S.L.P.; México 78384
[phone] fax [phone]
Villahermosa Office [phone]
e-mail [email protected]
www.murphymex.com.mx
FRANK W. MURPHY, LTD.
Church Rd.; Laverstock, Salisbury SP1 1QZ; U.K.
[phone] fax [phone]
e-mail [email protected]
www.fwmurphy.co.uk
MURPHY SWITCH OF CALIFORNIA
41343 12th Street West
Palmdale, California 93551-1442; USA
[phone] fax [phone]
e-mail [email protected]
www.murphyswitch.com
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our specifications and designs at any time.
MACQUARRIE CORPORATION
1620 Hume Highway
Campbellfield, Vic 3061; Australia
[phone] fax [phone]
e-mail [email protected]
FW Murphy
P.O. Box 470248
Tulsa, Oklahoma 74147 USA
[phone]
fax [phone]
e-mail [email protected]
www.fwmurphy.com
R
E
G
I
S
T
E
R
E
D
USA–ISO 9001:2000 FM 28221
UK–ISO 9001:2000 FM 29422
Printed in U.S.A.