Mustek GSMART-A30-QUICK-START User manual

Thank you for purchasing the Mustek Gsmart A30.
We have included this convenient Getting Started
guide to help with asic camera functions. For more
details on the different functions and operations,
please refer to the User Guide.
Website: ▪ GSmart A30
http://www.mustek.com ▪ Getting Started
Customer Service: ▪ Users Manual
(General Info) ▪ Installation CD
E-mail: [e-mail] ▪ USB ca le
FAX: [phone] ▪ Strap
Technical Support:
E-mail: [e-mail]
Phone: [phone]
Address:
15271 Barranca Parkway
Irvine, CA 9261
PICTURE
Low Com-
pression
High Com-
pression
High Res-
olution
(640 x
480)
26 52
Low Reso-
lution
(320 x
240)
104 209
VIDEO Time
320 x 240 17 Seconds
A. Shutter Button
B. LCD
C. Lens
D. Viewfinder
E. USB Socket
F. Strap Hole
G. Start / Function
Button
H. LED
I. ON/OFF Switch
Camera Functions Control
LCD Diagram Directions
(Fully charge camera efore first usage)
Step 1. Using the provided USB ca le, connect the
camera to the computer.
Step 2. Slide the “ON/OFF” Switch to “ON”.
LED: Re – Charging; Green – Fully Charged (ap-
prox. 3 hours. Do NOT overcharge attery).
Note: The camera may also e used while charging.
Step 3. Unplug the USB ca le after the camera is
fully charged.
Warning: To prevent loss of files, ownloa
them before sli ing the ON/OFF Switch to
“OFF”.
After 30 seconds of inactivity, the camera switches
to “Power Save” mode.
In order to prolong attery life, slide the ON/OFF
Switch to “OFF” when not using your camera and
after all files have een transferred to your comput-
er.
Step 1. Press the Start / Function Button to access
settings.
Step 2. Once at a desired setting, press the Shutter
Button to change.
Icons Descriptions
Hi High resolution mode (300K pixels)
Lo Low resolution mode (100K pixels)
OFF Turn off mode
Self timer provides a 10 second delay
Video mode
Delete all pictures in camera memory
Only delete the last picture/video taken
MODE Picture quality selection mode
Hd High compression (store more
pictures)
Ld Low compression
Lo
Hi
MO E
USB
Po r t

Step 1. Slide the ON/OFF Switch to “ON”.
Step 2. Press the Start/Function Button to turn on
your camera.
Step 3. Frame the su ject through the viewfinder.
Step 4. Press the Shutter Button to take a picture.
A eep sound will confirm that a picture was
taken.
Step 5. To turn off the camera, press the
Start/Function Button, LCD displays
“OFF”, then press Shutter Button.
Step 1. To take video, press the Start / Function
Button until you see the Continuous Shoot
icon ( )
Step 2. Press the Shutter Button down and egin
taking a video.
Step 3. Release the Shutter Button when you are
done.
Step 1. To elete all pictures and videos in the
camera's memory, press the Start /
Function Button until you see the Delete
All icon
( )
Step 2. Press the Shutter Button once.
Step 3. When the Picture Count starts to flash,
press the Shutter Button again and all files
will be elete .
Step 4. To delete one file at a time, press the Start /
Function Button to pass the Delete All icon
until you see the Delete One icon
( )
Step 5. Press the Shutter Button once and the last
picture or video taken will e deleted.
Step 1. Insert installation CD into
the CD-ROM drive
Step 2. Close the CD-ROM drive
Step 3. An installer wizard will automatically launch.
If the installer wizard does not appear, then;
Step 4. Click Start in the Windows Task ar.
Then, select Run to continue.
Step 5. Click Browse and type Run.exe.
Step 6. Click Open and then OK
Step 8. Follow on-screen instructions to complete
driver and undled software installations.
Step 1. After installing the software, connect the
camera to the computer with the USB ca le
provided.
Step 2. Dou le click the Digital Camera icon on
your Desktop or in the Start Menu.
Step 3. Choose the Photo Downloa option from
the menu.
Step 4. Once the preview panel is loaded, click on
the re Download Photos camera icon and
choose the directory where you want to save
your files.
Step 5. Once your files are transferred, you can quit
the Panel application.
Step 1. Connect the camera to the computer with
the USB ca le provided in the package.
Step 2. Dou le click the Digital Camera icon
on the Desktop or in the Start Menu.
Step 3. Once the menu is up, choose the Net
Meeting option.
For further information on how to use Net
Meeting, please visit Microsoft's on line
tutorial page.