Mustek VDC-300 User manual

GettingStarted
GettingConnected
CameraOperation
VDC-300
USER’S MANUAL
82-055-00010
SoftwareApplications
ViewFun
Appendices

2
Copyright Information
All rights reserved. No part of this publication may be reproduced,
transmitted, stored in a retrieval system, or translated into any
language in any form by any means, mechanical, optical, electronic,
recording, or otherwise, without the written permission of the
Manufacturer
The Manufacturer reserves the right to revise this manual and to
make changes to any or all parts at any time, without obligation to
notify any person or entity of such revisions and changes.
All other brand or product names mentioned in this manual are
trademarks or registered trademarks of their respective owners.
Copyright © 1998
Printed in Taiwan, July, 1998.
FCC Statement
This digital equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and if it is not
installed and used according to the instruction manual, it may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment causes harmful interference to radio
or television reception, which can be determined by turning the
equipment off or on, try to correct the interference by one or more
of the following measures:
• Reorient the receiving antenna
• Increase the distance between the equipment and the
receiver
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician
for help
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
NOTE
1. The changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be
used in order to comply with the emission limits.

3
Chapter2:CameraOperation
TheLCDMenu-CameraMode ...................................... 12
Functions ................................................................. 12
Flash ................................................................... 13
Quality ................................................................ 13
White Balance ..................................................... 13
Exposure ............................................................. 13
Self-timer ............................................................. 13
Auto-Off ............................................................. 14
LCDBrightness ................................................... 14
TV System Type .................................................. 14
Information Display ............................................. 14
Language ............................................................ 14
CapturingImages .................................................... 15
Processing........................................................... 15
TheLCDMenu-PlaybackMode .................................... 16
Functions ................................................................. 16
Four Picture Mode ............................................... 16
Delete Menu........................................................ 16
Delete All ............................................................ 17
Protecting/Unprotecting Images ........................... 17
ViewingImages ....................................................... 17
On the Camera LCD ..........................................................17
On the TV...........................................................................17
On the PC ...........................................................................17
Contents
Chapter1:GettingStarted
Supported Computer Systems ...........................................7
Package Contents ............................................................. 7
YourVideo Digital Camera .................................................7
Power Supply ...................................................................9
Installing the Batteries.................................................9
Using an AC Adapter..................................................9
Low-Battery Indicator..................................................9
Compact Flash Card........................................................ 10
Installing the Compact Flash Card.............................. 10
Removing the Compact Flash Card ............................ 10

4
Chapter3: GettingConnected
Connecting to the TV ..................................................... 19
ViewingImages ......................................................... 19
Real-timeDisplay ...................................................... 19
Connecting to the VCR ................................................... 20
Recording Real-time Video ......................................... 20
Connecting to the PC .................................................... 20
Chapter5:ViewFun
Hardware Installation ...................................................... 30
StartingViewFun ............................................................ 30
Functions....................................................................... 31
ViewWindow ................................................................. 31
The Video Album............................................................ 31
The Photo Album ........................................................... 32
Settings.......................................................................... 33
The Advanced Settings .................................................. 33
The Video Folder ....................................................... 34
The Picture Folder ..................................................... 35
TheE-mail Folder ...................................................... 35
The Language Folder ................................................ 35
RecordingaVideoClip ................................................. 36
Taking a Picture ........................................................... 36
E-mailingaVideoCliporPicture .................................. 36
Appendices
Trouble Shooting ........................................................... 38
Specifications ................................................................. 40
Glossary......................................................................... 41
Technical Support........................................................... 43
Chapter4:SoftwareApplications
SoftwareInstallation ..................................................... 22
Windows 95/NT 4.0/98 .............................................. 22
TransferringImagesto thePC(Importing) ................... 23
The Photo Album ........................................................... 24
The Setting Functions ............................................... 25
SelectingImages ....................................................... 25
Protecting Images ..................................................... 26
Deleting Images ........................................................ 26
TheControl Panel ..................................................... 26
Camera Mode ..................................................... 26
CapturingImages ......................................... 26
Playback Mode .................................................... 27
ViewingImages ............................................ 27
TransferringImages ............................................... 27
To the PC (Import)............................................... 27
To an image editing application (Transfer) ........... 27
To the camera (Upload) ........................................ 27
The Help System ............................................................ 28

5
Preface
Thank you for your purchase of the VDC-300. This guide covers all
of the features and functions of the camera.
In this user guide you will find the following topics:
Chapter 1: Getting Started
This chapter explains how to make your camera operational.
Chapter 2: Camera Operation
This chapter gives you step-by-step instructions on how to operate
the various functions of the camera.
Chapter 3: Getting Connected
This chapter gives you detailed instructions on how to connect and
use the camera with the TV, VCR, and computer.
Chapter 4: Software Applications
This chapter describes in detail how to use the camera’s software
(The Photo Album).
Chapter 5: ViewFun
This chapter explains the features and functions of the included
multi-function software.
Appendices
Provides troubleshooting information and specifications for the
camera along with a manual index and technical support information.

Chapter
SupportedComputerSystems ................................. 7
PackageContents ................................................... 7
YourVideo DigitalCamera ..................................... 7
PowerSupply .......................................................... 9
Installing the Batteries.........................................9
Using an AC Adapter..........................................9
Low-Battery Indicator..........................................9
CompactFlashCard .............................................. 10
Installing the Compact Flash Card...................... 10
Removing the Compact Flash Card .................... 10
1 Getting Started

7
Supported Computer Systems
This camera complies with the TWAIN standards, the industry
standard for imaging hardware and software. TWAIN eliminates
compatibility problems with software and input devices from
different vendors. The following are the minimum system
requirements for optimum performance with color images:
•Pentium/486 PC or notebook computer
•Windows 95/NT 4.0/98
•16 MB RAM
•20 MB available hard disk space for software installation
•VGA or Super VGA color monitor
Package Contents
•VDC-300 camera including 4 AA batteries
•USB and RS232 connection cables
•NTSC and PAL video output cable
•7.5V DC, 2A Power Adapter
•Camera strap and carrying bag
•Installation CD (TWAIN Driver, iPhoto)
•User's Manuals 1. Power Button: Turns the camera on/off.
2. Shutter button: Captures the image into the camera.
3. LED Indicator: Displays the current camera mode
(green=camera, orange = playback).
4. Mode Button: Switches between the two camera
modes (capturing images and displaying them).
5. Cable Panel: Contains the AC Power Adapter,
USB, Video, and RS232 connection terminals.
Your Video Digital Camera
The camera is equipped with a number of different features and
functions. To better understand and familiarize yourself with these
features and functions, please refer to the following pages before
using the camera.
1
2
3
4
5

8
6. LCD Panel: The Liquid Crystal Display panel allows you to
view real-time display, the menu functions, and image playback.
7. LCD On/Off: Turns the LCD on or off.
8. Menu Button: Displays the camera’s function menu in the LCD.
9. Select (Up): Scrolls up/backward through the function menu or
captured images.
10.Select (Down): Scrolls down/forward through the function
menu or captured images.
11.Enter Button: Selects the options from the function menu.
12.Viewfinder: Allows for viewing of the subject.
13 Compact Flash Card Panel: Allows for insertion or removal
of the optional CF card.
14 Strap Holder: Allows the camera strap to connect to the
camera for easy and safe carrying.
15 Battery Compartment: Allows for loading or unloading of the
batteries.
16.Tripod Holder: Allows a tripod to be secured to the bottom of
the camera.
1. Viewfinder: Allows you to position the subject in the image
that will be captured.
2. Lens: Allows the camera to focus on the subject and to capture
the image once the shutter button has been pressed.
3. Iris Selector: Allows for the adjustment of light levels
entering the camera.
4. LED Indicator: Alerts you when the self-timer is about to take
the picture.
1. AC Power Adapter Terminal:
Allows the camera to be connected
to an AC power supply.
2. USB Terminal: Allows the camera
to be connected to a computer via a
USB interface.
3. RS232 Terminal: Allows the
camera to be connected to a
computer via a serial interface.
4. Video Terminal: Allows the
camera to be connected to a
television or VCR.
3
2
1
4
8
7
14
15
11
9
12
13
16
6
10
2
14
3

9
Power Supply
Installing the Batteries
The camera comes with 4 AA alkaline batteries. Please refer to the
inside of the battery compartment lid or the following illustration to
properly install the batteries.
Using an AC Adapter
To save battery power, you may also use a standard (7.5v/2 amp)
AC power adapter.
To connect an AC power adapter:
•Plug the adapter into an appropriate AC outlet.
•Open the panel and insert the power adapter into the top slot as
shown.
Low-Battery Indicator
When the battery power becomes low, the battery icon will dis-
play and blink in your LCD. To continue to use the camera, either
replace the batteries or connect the AC power adapter. The images
will remain in the camera’s memory for an indefinite period of time.
Note: Extended use of the LCD causes rapid battery usage. There-
fore, we recommend using rechargeable batteries or the AC power
adapter whenever possible.

10
Compact Flash Card
The camera is equipped with a built-in Compact Flash Memory
Card port that allows you to use an optional, DOS compatible,
compact flash card (CF card) to store images. Using a CF card
overrides the internal memory of the camera enabling you to capture
more images if the internal memory is full.
You may use the optional CF card to store your images. Each MB
of memory can store approximately 4 High, 10 Standard, or 23
Economic quality images, or any combination of the three.
Note: Do not use a CF card with a memory capacity over 32 MB or
you will render the camera inoperable.
Note: Installing a new CF card requires a small amount of the CF
card’s memory capacity to create a directory for storing images.
Installing the Compact Flash Card
•Open the CF card panel (shown below).
•Slide the CF card firmly into the slot (shown below).
•Close the CF card panel.
Once a CF card is installed it automatically becomes the main
memory of the camera, and all functions of the camera (quality,
protect, etc.) refer to the images on or being captured to the card and
not images in the internal memory. To return the function reference
to the camera’s internal memory, simply remove the CF card.
Removing the Compact Flash Card
Open the CF card panel and pull the CF card out of the slot.
Note: The camera will signal you with two short beeps every time
you insert or remove the CF card, as well as every time you turn the
camera’s power on.