Mustek Docking Scanner User manual

V1.6
U
s
e
r
G
u
i
d
e
“Made for iPhone,” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPhone,
or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with
iPhone, or iPad may affect wireless performance.
All trademarks are the property of their respective owners and all rights are acknowledged.
For iPad, iPad mini and iPhone
Docking Scanner
L
i
g
h
t
n
i
n
g
C
o
n
n
e
c
t
o
r
S
u
p
p
o
r
t
e
d
Works with
Scanner App
iScan Pro

2
Safety and Precautions
Discarded electrical and electronic appliance are recyclable and should separate from the household waste. Please actively support in conserving
resources and protecting the environment by returning this appliance to the collection centers (if available).
•Never store the unit in hot, or very cold, or humid or dusty places.
•For an extended storage period, we recommend storing the unit in a cool and dry place.
•To help keep the scanning area clean, store the unit in a proper case when not in use.
•If the unit is left in extreme cold or hot conditions, allow to adjust to normal room temperatures before use.
•Only use accessories included with the unit.
•When left unused for a long period of time, the unit should be disconnected from the power supply.
•Always handle the unit with care. Avoid dropping and strong impact.
•Keep the lens and roller clean and free from scratches.
•Do not scan sharp objects or hard abrasive surfaces.
•Do not scan documents with glue, grease, correction fluid, or wet ink on it which can cause malfunctions.
•Do not scan adhesive-backed paper or labels as these may become detached during scanning and cause damage.
•Operate the unit on a level, well-grounded work surface, and free of excessive vibration.
•Don’t open the unit. Risk of electric shock.
•Use only a soft damp cloth to clean the exterior areas of the unit.
•Do not leave the unit within the reach of children.

3
Safety and Precautions ............................................................................................................................ 2
Contents................................................................................................................................................... 3
Supported Devices................................................................................................................................... 4
Quick Start ............................................................................................................................................... 5
Unpack..................................................................................................................................................... 6
Scanner Parts ......................................................................................................................................... 7
Connect and Turn on................................................................................................................................ 8
Attach the Plastic Clamp .......................................................................................................................... 9
Dock and Install the iScan Pro App........................................................................................................ 10
Scan and Save ...................................................................................................................................... 11
Use the Photo Sleeve ............................................................................................................................ 12
Clean...................................................................................................................................................... 13
Cleaning the Rollers .............................................................................................................................. 13
Cleaning the Lens .................................................................................................................................. 14
Calibrate ................................................................................................................................................ 15
Charge the Device .................................................................................................................................. 16
Helpful Hints .......................................................................................................................................... 17
Specifications......................................................................................................................................... 18
Contents

4
Supported Devices
This scanner is compatible with following devices:
iPad (4th generation) and iPad mini with iOS 6.0 or later.
iPhone 5 with iOS 6.0 or later.

5
Quick Start
1Connect to a power source. 2Turn on the power. 3Dock your device.
ON
4Install the 'iScan Pro' app. 5
Insert a photo, press 'Scan'.
6Press 'Save' to save the image.
Install ‘iScan Pro’
from the App Store.
Pleaseinsert a photo/document.
USB power adapter
(not included)

6
Unpack
Make sure following items are included.
Scanner USB Cable
(See p.8)
Calibration Card
(See p.15)
Cleaning Board
(See p.13)
Cleaning Strip
(See p.14)
Photo Sleeve
(See p.12)
Plastic Clamp
(See p.9)
User Guide
Please use the original USB power adapter that comes with your device for power supply.
NOTES

7
Scanner Parts
Lightning Connector
Feed Slot Exit Slot
StandMini USB Port
(For DC 5V power input only)
Paper Guide
Power Button
Power LED
Paper Guide

8
Connect and Turn on
1. Connect the USB Cable to the Scanner, and
connect the other end to the USB power
adapter included with your device.
2. Connect the USB power adapter to a power
outlet.
3. Long press the button for 3 seconds to
turn on the Scanner.
The Power LED blinks blue light rapidly at first, then remains
steady.
Turn Off the Power
Long press the button for 3 seconds to turn
off the Scanner. ON
USB power adapter
(not included)
• In case of insufficient power supply, do not
connect the Scanner to a computer or mobile
device for a power input.
• The Scanner will turn off automatically after 5
minutes if your device has not connected yet for
power saving.
NOTES

9
Attach the Plastic Clamp
Attach the supplied Plastic Clamp to the handle of
the Scanner to cushion between your device and
the Scanner.
Frequently attaching and detaching the Plastic
Clamp can develop scratches on the surface of
the handle.
NOTES

10
Dock and Install the iScan Pro App
1. Turn on your device. Hold and gently dock it
to the Lightning Connector.Make sure it sits
firmly in place.
2. An 'App Not Installed' message will appear
to redirect you to the App Store for installing
the iScan Pro app, press "App Store".
If the message didn't appear, go to the App Store to
search 'iScan Pro' to install it manually.
3. Upon completion, the iScan Pro app icon will
appear on your device's home screen with an
App launch message. Press "Allow" to launch
the app.
• Be cautious when you dock your device. Do not
bend your device forward as it may damage the
connector and your device.
•Ensure that your device has internet access via a
service provider or wireless connection.
•Do not perform other activities on the device during
installation.
NOTES

11
Please insert a photo/document.
Scan and Save
1. Press the (Settings) icon at the top-right
corner, select the Resolution (Standard or
Fine).
2. Place a photo/document facing up into the
Feed Slot, adjust the Paper Guides, gently
push it in until it is pulled into the Feed Slot.
3. Press the Scan button.
It starts scanning with a real-time preview.
4. Press the Save button to save the image to
your device's photos library.
If you wish to scan again press Cancel button and repeat
above steps.
When using the Scanner
the first time with a device
running iOS 6 or above, a
message ‘iScan Pro Would
Like to Access Your Photos’
will appear after pressing Save button, press ‘OK’ to
save images to the device's photos folder. If you select
‘Don’t Allow’, no image will be saved.
NOTES
Scan
Save
Please insert a photo/document.
Resolution

12
Use the Photo Sleeve when photos are fragile or
small to avoid damage or jams, and get the best
result.
1. Remove the plastic foil on the Sleeve, place
the photo inside of it, insert the tab into the
slot at the open end.
2. Insert the sealed end of the Sleeve facing
up into the Feed Slot, then adjust the Paper
Guides. Follow p.11 to start scanning.
Use the Photo Sleeve
Sealed end
• Acceptable paper thickness is between
0.08mm~0.6mm. Exceeding that range may cause
misfeed or jams.
• Scanning sharp objects, abrasive surfaces stapled
paper can damage the lens and other parts.
NOTES
Locking
slot

13
Dirt and residues can build up inside the Scanner
and affect image quality. Clean Scanner’s rollers
and lens periodically to get the best result.
Clean
•Make sure the Cleaning Board and Cleaning Strip are
clean and free of dust before use.
•Use a soft cloth dampened with alcohol to remove
dirt and stains from the Cleaning Board if necessary.
•Using small drops of alcohol on the cotton side of
Cleaning Strip can help clean lens easily.
NOTES
Cleaning the Rollers
1. Open iScan Pro. Press the (Settings)
icon at the top-right corner, select the Clean
setting.
2. Hold the foam strip of Cleaning Board facing
down, gently insert it into the Feed Slot.
3. Press the Clean button to begin the process.
The Cleaning Board will be pulled into the Scanner. Wait
until the Board is ejected with a 'Cleaning Done' message,
then press the OK button.
Mechanical sounds produced during the cleaning process
are normal.
Clean
Clean

14
Clean (cont'd)
Cleaning the Lens
1. Turn off the Scanner, remove the device.
2. Hold the foam grip handle of Cleaning Strip
facing down.
3. Insert the thinner end with cotton side facing
up into the Exit Slot from the rear of the
Scanner.
4. Gently move the Strip from side to side as
many times as necessary, then remove it.

15
Calibrate
• Always clean Scanner’s rollers and lens first before
calibration. If cleaning rollers and lens did not
improve image quality, then perform calibration.
• If necessary, perform calibration few times until
image quality is improved.
• Make sure the Calibration Card is clean and free of
dust before use.
NOTES
1. Open iScan Pro. Press the (Settings) icon
at the top-right corner, select the Calibrate
setting.
2. Remove the plastic foil on the Calibration
Card, insert it in the Feed Slot with the arrow
mark facing up and pointing to the Scanner.
3. Press the Calibrate button.
The Calibration Card will be pulled into the scanner. Wait
until the Card is ejected with a 'Calibration Done' message,
then Press the OK button.
Mechanical sounds produced during the calibrating process
are normal.
Calibrate
Calibrate

16
Charge the Device
Your mobile device will start charging when it is
docked to the Scanner that is turned on.
Your device's screen will indicate its charging status.
USB power adapter
(not included) ON
ON
• Your device will not charge when the Scanner is in
operation.
• If your device is not charging, remove your device
and reconnect it to start charging again.
• To ensure scanning operation, charge your
device if the battery has less than 20% capacity
remaining.
NOTES

17
Helpful Hints
Scanner does not turn on.
• Check if the USB cable is connected properly, and the Scanner is turned on.
• The Scanner turns off automatically in 5 minutes when your mobile device has not connected to it yet.
iScan Pro does not launch when the device is docked.
• Make sure the iScan Pro app is installed and the device is docked correctly.
• Check if the device is off or locked. Refer its own manual to unlock.
Cannot charge my device.
• Your device will not be charged when the Scanner is in operation.
The scan result is poor.
• Clean the Scanner’s rollers and lens first. If image quality does not improve, please perform calibration.
• Do not use the Photo Sleeve if the photo is laminated.
Cannot feed the paper.
• Remove the photo/document from the feed slot and insert it again until it is pulled in by the rollers.
• Check if the paper thickness is exceeded the limit.
• Do not scan more than one page at a time; otherwise the extra pages may not feed properly.
Cannot scan and/or save.
• Charge your device if the battery has less than 20% power.
• Close other running apps on the device to release memory.
On the Apple device, a message ‘iScan Pro Would Like to Access Your Photos’ appears after pressing SAVE button
•This is a privacy settings requested by your device.
Press ‘OK’ button in order to save images to your device. If you
select ‘Don’t Allow’, no image will be saved, and you will get an error message for the the next scan. Follow on-screen
instructions to solve the problem: select Settings > Privacy > Photos > iScan Pro > "ON".
The scanner behaves abnormally.
• Do not connect/disconnect your device when the Power LED is flashing.

18
Specifications
Scanner Type Sheetfed Scanner
Image Sensor Color CIS
Light Source LED (R, G, B)
Scan Size Min. 55mm x 90mm (2.2" x 3.5") ; Max. 216mm x 356 mm (8.5" x 14") (W x L)
Scan Thickness 0.08mm ~ 0.6mm (with supplied Photo Sleeve)
Scan Resolution Standard (300 dpi), Fine (600 dpi)
Scan Speed 12 seconds per page (A4 color) at 300 dpi
40 seconds per page (A4 color) at 600 dpi
Ports USB mini-B port, Apple Lightning connector
Power Source
Output: 5V, 2.4A by iPad USB power adapter (not included)
Output: 5V, 1.0A by iPhone USB power adapter (not included)
Power Consumption 12W (5V,2.4A Maximum) for iPad
5W (5V,1.0A Maximum) for iPhone
File Format JPEG
Auto Power-off Auto shutdown after 5 minutes when not in use.
Dimensions 331 x 110 x 98 mm (13" x 4.3" x 3.9") (W x D x H)
Weight 740g (1.63lbs)
Operating Conditions 5°C to 35°C (41°F to 95°F), humidity range 35% to 80% RH, non-condensing
System Requirements
iPad (4th generation), iPad mini, and iPhone 5 with iOS 6.0 or later
Minimum 30MB of free space in RAM for iScan Pro installation
An iTunes Store account (for iScan Pro download)
Internet access (for iScan Pro download)