2) Please clean the device with distilled water after using. Do not use tap
water, in case there is residual chlorine or chloroform in it.
1) Why do people see purple light during use?
The water molecules coming out of the sprayer are very small, and when
they come in contact with the skin, no heat is felt.
3) How do I adjust the steam?
By turning the spray regulator clockwise for larger steam and
counterclockwise for smaller steam.
4) Is there a distance I should stand from objects when spraying?
We recommend standing 3 feet from whatever you are spraying. This
ensures adequate time for the molecules to become a complete fog,
allowing for optimal disinfection.
5) I hear a slight “knocking” sound. Is that okay?
FAQ
Note:
1) The temperature of My Clean Buddy will go up when steaming. Be
sure to avoid flammable solutions, such as alcohol which can ignite
during use.
3) Please clean the device with vinegar and distilled water after using,
doing so will prevent corrosion.
When nano steam goes into the air, some water molecules could be
mixed. With normal temperature, the small water droplets can reflect
the violet light with the shortest wavelength (which can be seen by
human eye), so people will see purple light.
2) Why don’t people feel hot when touching the nano steam?
Yes, because My Clean Buddy uses an internal pump, depending on
the direction your aiming (up or down), the pump will adjust accordingly
and may make asound.
