MYAIR MYA54CA User manual

MYAIR
Plasma Car Ionizer
MYAIR MYA54CA
INSTRUCTION MANUAL

MYAIR
Plasma Car Ionizer
INTRODUCTION
Thank you for your purchase and welcome to the world of clean air living.
MYAIR Car Ionizer eliminates in-car air pollutants which are known to
contain airborne dust, toxic gases and harmful bacteria, including foul
odors. The Ionizer will protect you and your family from these health
hazards, and keep the air in your car cabin fresh, clean and healthy.
Read this manual carefully before you use the appliance and save it for
future reference.

MYAIR
Plasma Car Ionizer
ILLUSTRATION
Air Inlet
Filter compartment underneath
Power Indicator Light
Air Purifying
Air Output
Disinfector
Purifying / Disinfecting
Working Light
SPECIFICATIONS
Product Name
Plasma Car Ionizer
Model Number
MYA54CA
Weight
360 gm
Dimension
173 x 122 x 49 mm
Rated Voltage
DC 12 –24 V
Power Consumption
5 watts
Battery Capacity
850mA/H
AC Adapter Voltage
220V
Coverage Area
15m2
AC Adapter
Car Adapter
Filter

MYAIR
Plasma Car Ionizer
HOW TO INSTALL FILTER
1. Open the filter cover and pull the cord out.
2. Place the filter with the black side facing the Air Inlet.
USING THE APPLIANCE
1. Charge the appliance for at least 8 hours before using it for the first time.
2. Open the bottom filter lid to install the filter with the black activated carbon side
facing the air intake, then close the lid.
3. Press “Air Purify” to activate the device. A green working light indicates the
device is in purification mode. It will stop automatically after 60 minutes.
4. To turn off the device, press “Air Purify” again. The green working light is now
turned off and the device will shut down after 10 minutes.
5. Press “Disinfector” to put the device in disinfection mode. A blue working light will
be turned on. The disinfection will take 30 minutes. After 30 minutes, the device
will switch to the “Air Purify” mode automatically for another
30 minutes before shutting down on its own.
6. To turn off the device while in “Disinfector” mode, press the “Disinfector” and the
blue working light will be turned off. The device will shut down in 10 minutes.
7. Recharging the device is required when the power indicator light turns green or is
dimly lit.

MYAIR
Plasma Car Ionizer
FEATURES
Advance Active Carbon HEPA Filter Technology
Effectively filters and captures airborne particles as small as 0.1 micron.
Nanometer Light –Accelerant Air Purification
The Nano TiO2 light accelerant, decomposes harmful volatile organic compounds
inside the car such as formaldehyde, ammonia, benzene, VOCS, etc.,
It also deodorizes unpleasant smells of cigarette smoke, alcohol and food, It
effectively kills airborne bacteria and viruses, and protects passengers from cross
infection.
Plasma Purification
This removes airborne dust and static electricity, purifies polluted substances
from car combustion, such as carbon monoxide and nitrogen oxide.
Ozone Purification
Eradicates various infectious bacteria, decomposes organic gases, and deodorizes
unpleasant odors.
UV Germicidal lamp
Eliminates harmful airborne germs and bacteria.
Anion Technology
Produces negative ions and active oxygen, creating a natural forest-like
environment. Helps to keep the driver sober and alert, promote metabolism, and
adjust nerve function to relieve fatigue, ease stress and anxiety.

MYAIR
Plasma Car Ionizer
PURIFICATION STAGES
CAUTION
Use the device according to the instructions in this manual.
This appliance is intended for use in the car cabin only.
When the “Disinfector” is activated, it is advisable to stay out of the car for 2~3 minutes.
Do not attempt to repair the device by yourself.
Always turn off the device before unplugging from the power socket.
Do not use the device at temperature over 50 deg C.
CLEANING & MAINTENANCE
Do not use organic solvents to wash the appliance.
Ensure power is switch off before cleaning.
To clean the device, use a clean soft cloth to wipe the device including the air inlet
and outlet. It is recommended to replace the filter once a year.
WARRANTY
12 months warranty from the date of purchase against manufacturing defects.
This warranty does not cover damages caused by misuse, accidents and damages
resulting from a failure to comply to instructions in this manual.

MYAIR
Plasma Car Ionizer
操作说明
1. 打开净化器底部过滤网盖,将过滤网的活性碳面靠近进风口装入盒内.
2. 按“Air Purify” 净化键,工作指示灯亮绿色,净化功能起动工作 60 分钟后自
动停止,若要停止工作,再按一下 “Air Purify” 净化键,工作指示灯熄灭,进
入待机状态,电源指示灯延时 10 分钟熄灭.
3. 按“Disinfector” 工作指示灯亮蓝色,活氧(O3)消毒功能起动,风扇延时 1 分
钟后开始工作,工作 30 分钟后转为净化功能,净化 30 分钟后自动停止;若
要停止工作,再按一下 “Disinfector” 工作指示灯熄灭,进入待机状态,电源
指示灯延时 10 分钟熄灭.
4. 当产品消毒时按“Air Purify” 净化键转为净化功能,当产品净化
时按“Disinfector” 消毒键转为消毒功能,可任意切换.
5. 当按下按键后指示灯为绿色或不亮时,表示机内电池没电,请充电后再使用.
注意事项
1. 本机必须将过滤网装上才能正常工作.
2. 消毒时,车内人员应离开车室,以免出现不适.
3. 当电源指示灯为绿色时,净化机无法正常工作,请及时充电.
4. 初次使用时要先充电再使用,充电时间不少于 8 小时.第二次使用没电
时再次充满电,连续三次可延长电池使用寿命.
5. 不要试图修改本产品的机械或电子性能.
6. 禁止在强静电和强磁场的地方使用,否则易破坏电池安全保护电路,产品
严禁接触雨水或液体.
7. 请在环境温度为 0~50°C 下使用本机.
维护保养
1. 请勿用有机溶剂清洗机器;
2. 清洗时,请关闭所有电源,用软布和中性清洁剂擦洗机身,任何液体
都不能进入机身;
3. 请注意保护太阳能电池板,并保持太阳能电池板表面的清洁;
4. 请勿与硬物碰撞,以防止刮花和损坏;
5. 在断电的情况下,经常使用清洁的干棉布擦拭出风口,以保证空气净
化效果.

MYAIR
Plasma Car Ionizer
Table of contents
Popular Air Ionizer manuals by other brands

Tyent
Tyent YT20-TL Series user manual

Aerisa
Aerisa 8100 Installation, operation & maintenance manual

Schumacher Electric
Schumacher Electric 1227 manual

EMIT
EMIT 50604 Technical bulletin

GPS
GPS PS-2 Installation, operation & maintenance manual

Illinois Tool Works
Illinois Tool Works Simco Aerostat XC Operation & maintenance instructions