MyKronoz ZeWatch User manual

1

2

3
English _____________
Français ____________
Español ____________
Italiano _____________
Deutsch ___________
Nederlands _________
Page 4
Page 22
Page 40
Page 58
Page 76
Page 94

4
USER GUIDE
English

5
Characteristics of the ZeWatch
ZeWatch specications
Charging the ZeWatch
Operating the bracelet for the rst
time - Synchronisation with your
phone
Answering and/or rejecting a call
Setting the time
Your phone’s audio alerts (SMS, alarm
etc.)
Music on your phone
The MyKronoz «anti-theft» function
How to wear ZeWatch on the right
wrist
6
8
10
12
14
16
18
18
19
20

6
RED button
1. Characteristics of the ZeWatch
Connection signal
GREEN button
Battery
indicator
OLED screen

7
Function of the GREEN button
Answering a call Increasing the volume
Function of the RED button
Switching the bracelet on and off
Hanging up after a call
Reducing the volume
Already paired
Time display
Pairing
Call & number
Battery
00:00
PAIRING

8
2. ZeWatch specications
ZeWatch
• Bluetooth® version: V2.1
• Voltage: 3.6 V – 4.2 V
• Current: 45 mA - Frequency = 2.4 GHz
• Charging time = 2 to 3 hours
• Standby time = 72 hours (3 days)
• Battery type: Li-ion 150 mAh
• Size: 28 * 59 * 8.5 mm - Weight: 32 g
• Screen: 128 x 32 OLED
• Operating temperature: -20°C to +60°C
• Guarantee: 24 months
ZeWatch charger
• Supply voltage: 110 V to 240 V
• Frequency: 50 Hz
• Input: 0.15 A
• Output voltage: 5.7 V - Output: 600 mA

9
Warning about operation
This MyKronoz product is designed for receiving calls.
We recommend using it for short phone calls to pre-
serve battery charge, as its size and weight are opti-
mised for daily use of the bracelet.
If Bluetooth® fails to work when synchronising, try re-
setting the product and/or recharging it before trying
again.
It is important to remember that the maximum distance
for Bluetooth® communication between your bracelet
and your phone is ten metres (depending on your envi-
ronment, with better results in open spaces).

10
The product can be charged with the AC power supply
(110 V – 240 V) or directly via USB (5 V).
The power supply houses the USB port, and once the
bracelet is connected to its clip it indicates the battery
charge level.
The original cable is specically designed for the
ZeWatch and must be positioned correctly as shown
on the diagram below:
3. Charging the ZeWatch

11

12
WhenusingtheZeWatchforthersttime,itneedsto
be synchronised with your phone for Bluetooth® com-
munication.
4. Operating the bracelet for the rst time
Synchronisation with your phone
Bluetooth
Searching device
PAIRING Bluetooth
BRACELET
Bluetooth
BRACELET
ZTE-C N760
0000

13
Steps to take :
• Press the red button for ve seconds until the
word «PAIRING» appears on the screen
• Activate Bluetooth® on your phone
• Look for «MyKronoz» on your phone and select it
• Enter the code «0000»
• ConrmbytappingOK
• The screen on your MyKronoz displays the name
of your phone and vibrates once to indicate that
the phone and the ZeWatch are synchronised
Thissynchronisationisonlynecessarythersttimeyou
usethebracelet.Aftertherstuse,thephonewillauto-
matically recognise your MyKronoz product.

14
When an incoming call is received, press the GREEN
button twice to answer the call.
With a call already in progress on your phone, press
the GREEN button twice to transfer it to the ZeWatch.
Press the GREEN button once to increase the volume
or the RED button to reduce it.
Press and hold the RED button for two seconds to hang
up.
To reject a call, press the RED button twice.
5. Answering and/or rejecting a call

15
Bluetooth
Searching device
PAIRING Bluetooth
BRACELET
Bluetooth
BRACELET
ZTE-C N760
0000

16
Switch on the ZeWatch, then press and hold the GREEN
buttonforthreeseconds.Thescreenwillstarttoash.
PresstheREDbuttontochangethehour.Toconrm
the hour and set the minutes, press the GREEN button.
Finally, press the RED button to change the minutes
and conrm by pressing the GREEN button.
Make sure you keep the bracelet charged to avoid the
time being reset.
6. Setting the time

17
GREEN Button
00:00
RED Button

18
Once your phone and your MyKronoz bracelet are syn-
chronised, your phone’s audio alerts will be transferred
directly to the bracelet.
7. Your phone’s audio alerts (SMS, alarm
etc.)
Once the Bluetooth® synchronisation has been carried
out, you can listen to music using the loudspeaker built
into your MyKronoz bracelet.
Use the GREEN button to increase the volume and
RED to reduce it.
8. Music on your phone

19
The operating distance via Bluetooth® between the
MyKronoz product and your phone is about 10 metres.
If the ZeWatch loses the connection with your phone, a
vibration alarm will be triggered to warn you. Press any
button on your bracelet to stop the alarm.
9. The MyKronoz «anti-theft» function

20
It’s possible to switch the screen round so the time
and information are displayed on ZeWatch for rea-
ding comfortably
1/ Press the red and green buttons at the same time,
and hold them down for a few seconds until the screen
switches round.
2/ To switch back again, repeat the same action and
the screen will switch automatically.
10. How to wear ZeWatch on the right
wrist