MYTORQ MYBT-IM200+ User manual

PROGRAMMABLE CORDLESS IMPACT WRENCH
OPERATION AND MAINTENANCE MANUAL
Rechargeable –type: Impact Brushless Series
ANLIDAR INDUSTRIAL CO., LTD.
http://www.anlidar.com
Y2F211A-2E-005
MYBT-IM200+
MYBT-IM50+
MYBT-IM70+
MYBT-IM100+

1
Table of Contents
Ⅰ. Symbol, Accessory Description………………………………...…..2
Ⅱ. Warning……………………………………………………………..3
Ⅲ. Protection Function, Warning, Operation Instructions……………..4
Ⅳ. Screwdriver and Battery assembly/disassembly description:……...5
Ⅴ. Brief Function Operating…………………………………………..7
Ⅵ. Function Description:………………………………………………8
ⅥI. Instructions:………………...………………………………………10
1. Main panel buttons and screen display instructions:……………..10
2. KL-RC1 Remote control button icon description:………………..10
3. Operation function setting description:……………………………13
4. Function Preset: …………………………………………………16
5. Screwdriver, LED and BUZZER status description. …………….16
IX. Other Instructions..……………………………………………….18
X. Main Technical Parameters.…………….………………………..19

2
Please Read all Instructions Before Operation
(With parts exploded view)
Ⅰ. Symbol, Accessory Description
Symbol Description
Please refer to
the manual Warning Recyclable Indoor use only
Keep away
from
moisture
Keep away
from fire
source
Do not take
apart
Do not
discard
Safety
certification
Accessories
Product Name
Quantity
Unit
Manual 1 PC
Warranty certificate
1
PC
S belt hook 1 PC
Screw M3*0.5P*10LT
1
PC
BIT 2 PC
SOCKET ADAPTER & BIT WILL NOT BE PROVIDED WITH
SQVARE HEAD TOOL

3
Ⅱ. Warning
Before using the Battery Screwdriver, please check if the main parts/accessories are missing or
broken and read thoroughly the operating instructions carefully. Please follow the following
precautions/operation instructions and basic safety measures to avoid fire, electric shock and
personal injury etc.
1. Keep the workplace clean.
1.1 Cluttered areas and workplaces are prone to injury.
1.2 Do not operate or charge the chargeable tools in rain or water (humid environment). Avoid danger
and short-circuit damage to the Battery Screwdriver.
2. Pay attention to the environment of the workplace.
2.1 The Battery Screwdriver should be in a well-lighted workplace.
2.2 Do not let others operate the Battery Screwdriver unless it is assigned. Keep children and people
away to avoid danger.
2.3 To ensure safety, do not playful while operating the Battery Screwdriver.
2.4 Do not operate the Battery Screwdriver in a hazardous location (flammable gas or liquid).
2.5 Do not operate the Battery Screwdriver when you are tired or taking alcohol or drugs to avoid
danger.
3. When not using the Battery Screwdriver, remove the Battery and store it in a dry and safe place.
4. To ensure the function and safety of the Battery Screwdriver, do not use it improperly.
5. Please carefully select the Battery Screwdriver of appropriate torque to do the operation according
to the requirements of the parts to fasten in order to avoid danger and defects, do not use the
Battery Screwdriver for unintended applications, such as: drilling, self-tapping screws, etc.
6. When using the Battery Screwdriver, dress properly. Do not wear loose clothing or jewelry, etc., to
avoid danger from hooking by tools.
7. Hold the Battery Screwdriver properly before operation, then press the start button and avoid
incorrect holding of the tool.
8. Use the Battery Screwdriver with S belt buckles, wrist straps, etc. to assist in work and storage, and
keep them away from children, avoiding danger.
9. Careful maintenance tools and conduct regular inspection of the Battery Screwdriver and Battery.
In case of damage, use the designated repair center and keep the tool body clean, to avoid oil
stains.
10. Unplug the power cord when the Battery station is not in use.
11. If you do not use the Battery Screwdriver for a long time, remove the rechargeable battery.
12. It is forbidden to use the parts and accessories (Battery, Battery stand) of the Battery Screwdriver
from others, for modification or reassembly, to avoid product defects and danger.
13. Stay alert when operating the Battery Screwdriver. Before using the Battery Screwdriver, carefully
check the safety measures or if parts are broken to ensure that the tool can be used as intended.
14. Maintenance and Inspection: The screwdriver must be operated in top condition, one day working
hour must be not more than eight hours. According to operating frequency and torque loaded, we
suggest adding lubricating oils in clutch per year, and kindly contact with distributor when
product's maintenance.
15. Please make sure to read and follow the precautions/operation instructions and basic safety
measures in the manual. The company is not responsible for any danger caused by non-compliance.
16. Use a safety device: Wear protective earmuffs to reduce personal injury.
Noise:
The typical A-weighted noise level acc. To EN62841-2-2
.Sound pressure level(LpA): 53.6 dB(A)
.Sound power level(LwA): 64.6 dB(A)
Vibration:
The vibration total valoue acc. EN62841-2-2
. Vibration emission value ah (m/s²): 0.17 m/s²
Uncertainty K (m/s²): 0.02 m/s²

4
17. Although the PTM-200 could reach torque up to 200 N.m within five seconds, to avoid wearing
components down and life cycle, a long time use at torque 180 N.m or above does not recommend.
18. [Note] There will be 20% decreasing on torque when perform soft join.
Ⅲ. Protection Function, Warning, Operation Instructions
Protective Function for the Battery Screwdriver
Cautions
Do not disassemble or modify the Battery Screwdriver
arbitrarily, otherwise, the warranty will not be Valid.
1. Remove the Battery before servicing the Battery Screwdriver. If you are not a qualified service
technician, do not attempt to repair the Battery Screwdriver.
2. It is forbidden to disassemble or modify the Battery Screwdriver to avoid danger. If you install a
Battery from other company to cause product defects or related danger, our company is not
responsible for repair and compensation.
3. Please be sure to use the original parts and lubricants to service the screwdriver. If using
non-original parts for repair causes the Battery Screwdriver broken or related danger, the
warranty will be void. Our company is not responsible for repair and compensation.
4. The most suitable working temperature is above 0°C and below ~35°C.
Operating Instructions
Before using this Battery Screwdriver, please fully charge the Battery and then assemble it to assure
safety. Before assemble/disassembly, please make sure that the forward/reverse switch lever is
in the middle, as shown by the arrow below.
Over-current protection
Low Battery protection
Temperature protection
Forward and reverse three-stage control protection
Low speed & stall protection
Sleep mode
Battery ID identification
forward/reverse switch lever

5
Ⅳ. The assembly/disassembly method for the Battery Screwdriver
and Battery is shown in the figures below, with description:
Assembly Diagram
(1) As shown by the circle in Figure 1: After the inverted triangle arrow on the screwdriver is aligned
with the positioning line on the Battery, press the screwdriver down with clip latches.
(2) Push the screwdriver as shown in Figure 2 in the direction of Battery clip latch, and you will hear a
click, and the Battery clip latches will fasten the screwdriver.
(3) Assembly is completed.
Awaken
state
Press the trigger to
wake up the
screwdriver
Light
1. When the screwdriver
and the Battery are not
installed in the clip
latches, the indicator
light: flashing in red
and green alternately.
2. The panel light is ON.
1. When the screwdriver
and the Battery are
installed by the clip
latches, the indicator
light: red or green
light is ON~OFF.
2. The panel light is ON.
Buzzer
When the screwdriver
and the Battery are not
installed in the clip
latches, the buzzer
sounds BB continuously.
When the screwdriver
and the Battery are
installed by the clip
latches, the buzzer
sounds BB once
ID identification
If unsuccessful, the
screwdriver disable to
start running after
pressing the trigger.
If successful, the
screwdriver enable to
start running after
pressing the trigger.
Sleep
state
after being awakened
if ID identification is
not performed within
7 seconds, it will go
into sleep mode
Light no no
Buzzer no no
Clip Latch
S
witch
Positioning
L
ine
(FIGURE 1) (FIGURE 2)
(FIGURE 3)

6
Disassembly Diagram
(1) Press and hold the Battery clip latches.
(2) Push the screwdriver all the way to the back.
(3) Then take out the screwdriver and disassemble it.
(FIGURE 1)
Clip Latch
S
witch
(FIGURE 3)
(FIGURE 2)

7
Ⅴ. Brief Function Operating
Function Name Comparison Table
Number Name Number Name
(1)
Start trigger
(7)
Signal display light
(2)
Forward and
reverse switch level
(8) Power indicator light
(3)
LED lighting
(9)
Display panel
(4)
Bit sleeve
(10)
Wrist strap hole
(5)
Aluminum alloy
front cover
(11) Bluetooth
(6)
S belt hook hole
(12)
Rechargeable Battery
(10)
(5)
(7)
(8)
(1)
(
6)
(
9)
(12)
(11)
(2)
(4)
(3)

8
Ⅵ. Function Description:
1. This Battery Screwdriver is an Impact Screwdriver. When the screw is
being fastened with DaDaDa sound, it means the Battery Screwdriver
continues to apply the impact until the stroke is completed, and then it will
stop the impact action.
(1) Start trigger:
1-1. Press the start trigger 1/3 inward, and the Battery Screwdriver will
start slowly. Press the trigger deeper, the screwdriver runs faster until the
trigger is fully pressed, and full speed is reached. According to the setup
condition, when the impact is stopped in the final position or the trigger is
released, the Battery Screwdriver will stop running.
1-2. Press the trigger to wake up the screwdriver.
(2) Forward and reverse switch lever:
2-1. When pushing the forward and reverse switch lever to the right,
follow the arrow symbol → on the switch for forward , to tighten the
screw; otherwise, follow the arrow symbol ← on the switch for reverse ,
to loosen the screw, as shown in the figures below; whenever you do not
use the Battery Screwdriver, leave the forward and reverse switch lever in
the middle.
2-2. Leave the forward and reverse switch lever in the middle, and press
trigger to LED ON or OFF.
Forward
(Lock Screw)
Reverse
(Retract Screw)

9
(3) LED light:
LED light is for auxiliary lighting, with option for on or off. Switch
method: move the forward and reverse switch lever to the middle and press
the trigger to turn on or off.
(4) Bit sleeve operation and compatibility:
Pull the cap of the Battery Screwdriver outward, and then load the
BIT as shown in the following figures.
(5) Aluminum alloy front cover: Fix gear box.
(6) Screwdriver hook: Prevent falling during operation and facilitate
hanging of the tool.
(7) S belt hook: It is convenient for the operator to hook up the Battery
Screwdriver.
(8) & (9) Display light and buzzer: Refer to chapter Ⅴ. screwdriver, LED
and BUZZER status description.
(10) Display panel: Display settings and usage status.
(11) Wrist strap: The tool can be fixed to the wrist to prevent it from
falling during operation, and it facilitates the storage of hanging tool.
(12) Bluetooth: For screwdriver to connect to controller wireless.
(13) Rechargeable Battery: For screwdriver.
2. Chemicals such as acetone, benzene, alcohol, thinner, ketones,
trichloroethylene, etc. must not contact the case of the Battery
Screwdriver to avoid chemical damage.
Load Bit
FIGURE 1
Pull

10
3. Please operate the Battery Screwdriver carefully in accordance with the
operating instructions. Do not drop or subject the Battery Screwdriver to
impact.
4. When the Battery Screwdriver is running, do not change the forward and
reverse switch lever to avoid system error determination.
5. During the operation of the Battery Screwdriver, if the forward and
reverse switch lever is changing, the Battery Screwdriver will start the
protection program to stop the tool and will resume normal operation
when it is restarted.
6. The mechanical wear of the Battery Screwdriver depends on the user's
torque, time or frequency. The greater the torque, the longer the time or
the higher the frequency, the faster the wear; after one month of use (8
hours every day, operating frequency 15Pcs/min) the minimum torque
attenuation is about 2~3% of (the maximum is 3~5%), and the
attenuation will gradually decrease and be stabilized over time. The user
can periodically use the torque meter to determine if the torque output of
the Battery Screwdriver meets the needs and timely compensate the
attenuated torque.
VII. Main panel and Remote control description:
1. Main panel buttons and screen display instructions:
Main panel button function description:
1.WS/ST: Quickly browse the setting of the running
Program/press and hold the button to enter the remote control
setup mode.
2.Pc: switch the running program
*Remember that after the switch, press the “Res” button to
return to the screwdriver work screen. Press the "Res"
button again to reset counting.
3.Res: Sleep wakeup/clear counter/confirm
When the screwdriver still for over 3 minutes, it will enter the sleep
mode.
Description of the panel display:
1. The program is shown in the red frame on the left, with the
range [1]~[5]
2. The number of screws (batch count) is shown in the red
frame in the middle, with the range [01]~[99]
3. The battery status is on the right.

11
2. KL-RC1 Remote control button icon description:
Press and hold on “WS” key button till “SE1” shows up on screen.
(1)[ ]after setup, illustration for remote controller buttons:
Program Select Program
Bluetooth Batch Count
Buzzer Force
Lock Impacts
Save Limit
2. KL-RC1 Remote control button icon description:
Press and hold on “WS” key button till “SE1” shows up then press “Pc” key
button, and the “SE2” will show up on screen
(2)[ ]after setup, illustration for remote controller buttons:
NG Confirm
Function
Program
OK ALL
Auto/Manual
Function
Rundown Friction
N/A Thread Preset Function
N/A N/A
Save N/A

12
2. KL-RC1 Remote control button icon description:
Press and hold “WS” and “Res” key buttons at the same time till “SE3”
appears on screen.
(3)[ ]after setup, illustration for remote controller buttons:
N/A N/A
Firmware versions
confirm & setting. N/A
Tightening on
forward/ reverse
setting
N/A
Factory default
setting N/A
Save N/A

13
3. Operation function setting description:
Step1：Press and hold [WS/ST] button on the panel, to prompt [SE1], then use the
remote control to set up the parameters according to the function requirements.
Step2：Press and hold the [number increase or decrease keys] on the remote control to speed
up the value change.
Step3：After setup, press [Save] to return to the main screen.
※The screwdriver will save current setting automatically when operator null for over 30
seconds under setting mode.
Setup Items
Function Description
Factory
Defaults
Program
Set Program: [P01~P05]:
(1) In any Program, press [Select] to make or cancel a selection,
which means selecting one or more Programs to run the
workpiece.
(2) If the workpiece content [P01] & [P02]: When the screwdriver
run to [P02], modify and save [P02] function, the program to
start will not be [P01], but [P02], meaning program to run will
be the one at exiting the setup mode.
(3) Single program cycle setup: press the button and then press
to select the program, + and - to increase or decrease,
after selecting setting and operation, the fasten is only
at P01 program setting until the last screw, and upon
completion, it will automatically loop back to the P01 program
selection operation (continuing for five single programs), and
will not interact and cycle with other programs.
(4) Multi-program cycle setup: press button and then
pressto select the program, call the single program
and press the button again to select.By using +
and - to increase or decrease, multi-program selection is
available for cycle operation, for example, select P.0.1 and P.0.2
programs, when the last screw fasten of the P.0.1 program is
completed, it automatically cycles to P.0.2 program to run the
operation and so on.
P01
Bluetooth Bluetooth function: bLn ON and bLF OFF. bLF

14
Buzzer Buzzer sound function: bun ON [Warning tone], buF OFF [Warning
tone] status. Bun
Lock [program switch button] Lock function:
(1) Lcn [Lock]: The program cannot be switched.
(2) LcF [Unlock]: The program can be switched.
LcF
Save
Save function:
(1) After the setup is completed, save and exit the setup function,
and the main panel screen displays the work screen.
(2) After the setup is completed, it will not run for 30 seconds and
will be saved automatically; and the main panel screen displays the
work screen.
(3) After the main screen display returns to the work screen, press
the "Res" button to update the batch count to the new setting.
(4) After storage is completed, the main panel screen returns to the
work screen and shows the last stored program selection.
*
Botch Count
Batch Count setting for screw fasten:
(1) The setting value is [noF] [n01]~[n99], set according to the
number of screws to fasten.
(2) [noF] is to turn off the screw count display.
n05
Force
Impact Force setting: Adjust the impact force based on needs
MYBT-IM100+ setting value is [F01]~[F06]
MYBT-IM70+ setting value is [F01]~[F06]
MYBT-IM50+ setting value is [F01]~[F03]
F01
Impacts
Impact Setting:
The MYBT-IM100+ & MYBT-IM70+ is the level of impact setting
from [H01] to [H99]. Adjust impact level slightly to reach target
torque.
The MYBT-IM50+ is the level of impact setting from [H01] to
[H50]. Adjust impact level slightly to reach target torque.
[HoF] is to turn off the parameter display. (Start the pressure plate
let go, the screwdriver stop tap)
H10
Limit
Limit rotation number setup:
The setting value is [LoF] [L02]~[L99], and the Limit rotation
number is adjusted based on needs.
[LoF] is to turn off Limit count display.
LoF

15
Display Panel
+
Botch Count
Ignore Rundown Friction:
1. Press and hold “WS” button on the counter panel until “SE1”
shows up on the screen.
2. Press “Pc” button to prompt “SE2” on the screen, and use “Batch
Count” on the remote controller for setting.
3. The [uoF] is the level of thread setting from [u01] to [u99]. Adjust
forcing threads for your tightening needs. (ensured threads)
4. The [uoF] setting may cause “L” setting invalid when [uoF] thread
value is equal or greater than “L”.
uoF
Display Panel
+
Force
Thread Preset Setting:
1. Press and hold “WS” key button till “SE1” shows up.
2. Press “Pc” key button till “SE2” shows up and then setup “Force”
from remote control.
3. The [coF] is the level of thread setting from [c01] to [c99]. Adjust
preset threads for your tightening needs. The screwdriver will auto
shut off and appear OK when tightening has reached preset value.
coF
Display Panel
+
NG Confirm Setting:
1. Press and hold “WS” button on the counter panel until “SE1” shows up on
the screen.
2. Press “Pc” button to prompt “SE2” on the screen and use the “ ”
on the remote controller for setting.
3. The [ncF] & [ncn] perform when NG shows up, system locks or unlocks
screwdriver.
4. The [ncF] is disable and the [ncn] is enable. The screwdriver will go to the
status of NG confirm when the value of impact setting is less than the
value of “L” setting.
5. To unlock screwdriver by releasing trigger and press “Res” button when
signs of a red LED keep on and buzzer keeps on briefly.
ncF
Display Panel
+
OK ALL Auto/Manual Settings:
1. Press and hold “WS” button on the counter panel until “SE1” shows up on
the screen.
2. Press “Pc” button to prompt “SE2” on the screen, and use “ ” on
the remote controller for setting.
3. The setting value is [AcF] [Acn], to set function based on needs.
4. When set to [Acn], the screwdriver rotation behavior will be
prohibited when OK ALL occurred, then need to press the "Res"
button to confirm and functional resume.
AcF
Display Panel
+
Forward Fastened/Reverse Fastened Setting:
1. Press and hold “WS+Res” button until “SE3” shows up on the screen.
2. Use “ ” on the remote controller for setting.
3. The setting value is [rrF] [rrn], to set function based on needs.
rrF

16
Remark: Press and hold +/- button to increase the adjustment speed of
the relevant parameters [01]~[99].
4. Values of Function Preset
Other preset values like bLF, bun……rrF
※“LoF” preset is OFF.
※Other function presets are:
Bluetooth: blF, Buzzer: bun, Lock: LcF, Thread disregard setting: uoF, OK All Auto/ Manual
setting: AcF, NG confirm setting: ncF, Clockwise/ Counterclockwise: rrF
5. Screwdriver, LED and BUZZER status description:
Function Name Screwdriver Status LED Status
Buzzer warning
tone (bun ON)
OK Fasten is completed and the
screwdriver is stopped
Green light is
ON (up) 1 short tone
OK ALL
Fastening entire workpiece is
completed and the screwdriver is
released
Green light, red
light (up) 1 long tone
NOK Fasten operation errorRed light is ON
(up)
Keep a short tone
until the trigger
is released
Display Panel
+
Reset to Default Settings:
1. Press “WS+Res” button on the counter panel until “SE3” shows up on the
screen.
2. Your setting will be completed when screen shows numbers of program
set/ screw and hear a “Beep” sound by press “Key ” button from
remote control
3. Press “Res” button again to return to standby mode.
Display Panel
+
Version Confirmation Setting:
1. Press and hold “WS+Res” button on the counter panel until “SE3” shows
up on the screen.
2. Press “ ” button on the remote controller, and the screen will di
splay
the version in full bright light. Press “Save”, after hearing “beep” sound,
completion is confirmed.
Program
P01
P02
P03
P04
P05
Batch Count
n05
n05
n05
n05
n05
Force
F01
F01
F01
F01
F01
Impacts
H10
H10
H10
H10
H10
Limit
LoF
LoF
LoF
LoF
LoF

17
The Limit rotation number is
abnormal
During fasten operation, the
screwdriver completes the fastening
faster than the set Limit, and NOK
phenomenon occurs.
Red light is ON
(up)
Keep a rapid
short tone until
the trigger is
released
Stripped Screw
During fasten operation, the
screwdriver continue fasten, and
fastening cannot be completed.
Red light is ON
(up)
Keep a short tone
until the trigger
is released
Sleep mode
1. When the screwdriver does not
run for over 180Sec, it will enter
the sleep mode
2. The parameter is set to disable
sleep mode
no no
Overcurrent protection (A)
In the protection state, red LED
on with 2 short beep sounds.
The tool will restore normal after
10 seconds with 1 short beep
sound.
Red LED on.
(Top side)
2 consecutive
short tones
Thermal Protector (ºC)
Motor cannot start when
temperature exceed 80 ºC
be start when temperature below
70 ºC
Motor
temperature
protection：
Red LED
flashes
no
MOS
temperature
protection：
Orange LED
flashes
Low speed & stall protection:
In the protection state, red LED
on with 3 short beep sound. The
tool will restore normal after 10
seconds with 1 short beep sound.
Red LED on.
(Top side)
3 consecutive
short tones
Battery ID identification is
abnormal The screwdriver does not work
Red/green light
flashes
alternately
Continuous Beep
sound
Low voltage
Less than
14.0V
Function normal
Red light is ON
(down)
N/A
Insufficient voltage Less than
13.8V Unable to start Red light
flashes (down)
Keep a short tone
until the battery
is removed

18
IX. Other Instructions:
1. The optimal use of this Battery Screwdriver is no more than 8 hours per day.
2. The repair and maintenance of the Battery Screwdriver can be sent to the designated
after-sales service center or the local service center via the original dealer. If the product is
disassembled by the customer, our company will not be responsible for repairs.
3. If the customer sends the Battery Screwdriver to a service center that is not designated
by our company for repair or self-disassembly, the resulting quality issue will not be
covered by the warranty.
4. It is the responsibility of the management department of the Battery Screwdriver to
assure this manual be provided and readby the operators or users . Do not attempt to
repair the Battery Screwdriver by yourself.
5. To remove the protective cover, please remove the slots on both sides as shown in the
following figure. To install the protective cover, have the protective cover notch
downward and push the Battery Screwdriver into it, and assure it is stuck in slots, as
shown in the following figure.
6. Please use our company’s specified testing equipment and screws to test MYBT-IM+
Impact Screwdriver.
7. This screwdriver is of clutch type mechanical control and the test conditions is based
ISO 6789.
Description of Compatibility
of Battery and Battery Station
1. Please use our company’s specified Battery, and consult with the agent to introduce
according to the customer needs.
2. Our Battery Screwdriver and Battery built-in ID Identification Function Protection, it
cannot be activated if using non-original Battery or Battery Screwdriver.
Load
FIGURE 1
FIGURE 2
Slots