©2013 NAD ELECTRONICS INTERNATIONAL, A DIVISION OF LENBROOK INDUSTRIES LIMITED
All rights reserved. NAD and the NAD logo are trademarks of NAD Electronics International, a division of Lenbrook Industries Limited.
No part of this publication may be reproduced, stored or transmitted in any form without the written permission of NAD Electronics International.
D7050_QS_V06 07/13
1 Using applicable Apple USB cable (not supplied), connect a Wi-Fi connected iOS device to the USB input of D7050.
2 Press WPS/JB by safely using
the tip of a pointed object.
3 From iOS device, tap “Allow”.
NOTE: Upon successful Wi-Fi sharing, disconnect iOS device from D7050. Refer to the owner’s manual for other methods of network connection.