NAD VISO TWO User manual

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ
®
Owner’s Manual
VISO TWO
DVD Receiver

SAVE THESE INSTRUCTIONS FOR LATER USE.
FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE
AUDIO EQUIPMENT.
1 Read instructions - All the safety and operating instructions should be
read before the product is operated.
2 Retain instructions - The safety and operating instructions should be
retained for future reference.
3 Heed Warnings - All warnings on the product and in the operating
instructions should be adhered to.
4 Follow Instructions - All operating and use instructions should be
followed.
5 Cleaning - Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
6 Attachments - Do not use attachments not recommended by the
product manufacturer as they may cause hazards.
7 Water and Moisture - Do not use this product near water-for example,
near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool; and the like.
8 Accessories - Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury to
a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufacturer,
or sold with the product. Any mounting of the product should follow
the manufacturer’s instructions, and should use a mounting accessory
recommended by the manufacturer.
9 A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces may
cause the product and cart combination to overturn.
10 Ventilation - Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be blocked
or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product should
not be placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s instructions have
been adhered to.
11 Power Sources - This product should be operated only from the type
of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product dealer or
local power company.
The primary method of isolating the amplier from the mains supply
is to disconnect the mains plug. Ensure that the mains plug remains
accessible at all times. Unplug the AC power cord from the AC outlet if
the unit will not be used for several months or more.
12 Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will t into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to t, contact
your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
13 Power - Cord Protection - Power-supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
14 Outdoor Antenna Grounding - If an outside antenna or cable system
is connected to the product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges
and built-up static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper grounding
of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV system installer’s attention to Section
820-40 of the NEC which provides guidelines for proper grounding and, in
particular, species that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
15 Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the product due to lightning
and power-line surges.
16 Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be
fatal.
17 Overloading - Do not overload wall outlets, extension cords, or
integral convenience receptacles as this can result in a risk of re or
electric shock.
18 Object and Liquid Entry - Never push objects of any kind into this
product through openings as they may touch dangerous voltage points
or short-out parts that could result in a re or electric shock. Never spill
liquid of any kind on the product.
WARNING: THE APPARATUS SHOULD NOT BE EXPOSED TO
DRIPPING OR SPLASHING, AND OBJECTS FILLED WITH LIQUIDS,
SUCH AS VASES, SHOULD NOT BE PLACED ON THE APPARATUS.
AS WITH ANY ELECTRONIC PRODUCTS, USE CARE NOT TO SPILL
LIQUIDS INTO ANY PART OF THE SYSTEM. LIQUIDS CAN CAUSE A
FAILURE AND/OR A FIRE HAZARD.
IMPORTANT SAFETY INSTRUCTIONS
2
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

19 Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualied service personnel under the following
conditions:
a) When the power-supply cord or plug is damaged.
b) If liquid has been spilled, or objects have fallen into the product.
c) If the product has been exposed to rain or water.
d) If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions as an improper adjustment of other controls
may result in damage and will often require extensive work by a
qualied technician to restore the product to its normal operation.
e) If the product has been dropped or damaged in any way.
f) when the product exhibits a distinct change in performance-this
indicates a need for service.
20 Replacement Parts - When replacement parts are required, be
sure the service technician has used replacement parts specified
by the manufacturer or have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
21 Safety Check - Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
22 Wall or Ceiling Mounting - The product should be mounted to a wall
or ceiling only as recommended by the manufacturer.
23 Heat - The product should be situated away from heat sources such as
radiators, heat registers, stoves or other products (including ampliers)
that produce heat.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
CAUTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
CAUTION
This DVD Receiver employs a Laser System. To ensure proper use of this
product, please read this owner’s manual carefully and retain for future
reference. Should the unit require maintenance, contact an authorized
service location. Use of controls, adjustments or the performance of
procedures other than those specied may result in exposure to laser
radiation. To prevent direct exposure to laser beam, do not try to open the
enclosure. Visible laser radiation when the enclosure is opened.
DO NOT STARE INTO BEAM.
FCC NOTICE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try
to correct the interference by one or more of the following measures
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
INDUSTRY CANADA REQUIREMENT
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN
AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE”
WITHIN THE PRODUCT’S ENCLOSURE THAT MAYBE OF
SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC
SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS
INTENDEDTO ALERTTHE USER TO THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN
THE LITERATURE ACCOMPANYING THE APPLIANCE.
The equipment draws its nominal non-operational power from the AC
outlet with its POWER switch in the STANDBY position.
The socket-outlet shall be installed near the apparatus and shall be easily
accessible.
CAUTION
Changes or modications to this equipment not expressly approved by
NAD Electronics for compliance could void the user’s authority to operate
this equipment.
CAUTION REGARDING PLACEMENT
To maintain proper ventilation, be sure to leave a space around the unit
(from the largest outer dimensions including projections) that is equal to or
greater than shown below.
Left and Right Panels: 10 cm
Rear Panel: 10 cm
Top Panel: 50 cm
IMPORTANT SAFETY INSTRUCTIONS
3
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

IMPORTANT INFORMATION FOR UK CUSTOMERS
DO NOT cut o the mains plug from this equipment. If the plug tted is not
suitable for the power points in your home or the cable is too short to reach
a power point, then obtain an appropriate safety approved extension lead
or consult your dealer. If, nonetheless, the mains plug is cut o, REMOVE
THE FUSE and dispose of the PLUG immediately, to avoid possible shock
hazard by inadvertent connection to the mains supply. If this product is
not provided with a mains plug, or one has to be tted, then follow the
instructions given below:
IMPORTANT
DO NOT make any connection to the larger terminal which is marked with
the letter ‘E’or by the safety earth symbol or colored GREEN or GREEN AND
YELLOW.
The wires in the mains lead on this product are colored in accordance with
the following code:
BLUE – NEUTRAL
BROWN – LIVE
As these colors may not correspond with the colored markings identifying
the terminals in your plug, proceed as follows:
The BLUE wire must be connected to the terminal marked with the
letter ‘N’or colored BLACK.
The BROWN wire must be connected to the terminal marked with the
letter ‘L’or colored RED.
When replacing the fuse, only a correctly rated and approved type should
be used, and be sure to re-t the fuse cover.
IF IN DOUBT CONSULT A COMPETENT ELECTRICIAN.
NOTES ON ENVIRONMENTAL PROTECTION
At the end of its useful life, this product must not be disposed
of with regular household waste but must be returned to a
collection point for the recycling of electrical and electronic
equipment. The symbol on the product, user’s manual and
packaging, point this out.
The materials can be reused in accordance with their markings. Through
re-use, recycling of raw materials or other forms of recycling of old
products, you are making an important contribution to the protection of
our environment. Your local administrative oce can advise you of the
responsible waste disposal point.
NOTE: THE VISO TWO IS NOT AN AUTO VOLTAGE DVD RECEIVER.
CONNECT ONLY TO THE PRESCRIBED AC OUTLET, I.E., 120V 60HZ
OR 230V 50HZ.
RECORD YOUR MODEL NUMBER NOW, WHILE YOU CAN SEE IT
The model and serial number of your new VISO TWO are located on the
back of the cabinet. For your future convenience, we suggest that you
record these numbers here:
Modelno:......................................
Serial no.: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS
NAD is a trademark of NAD Electronics International, a division of Lenbrook Industries Limited
Copyright 2008, NAD Electronics International, a division of Lenbrook Industries Limited
4
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

INTRODUCTION
TABLE OF CONTENTS
THANK YOU FOR CHOOSING NAD.
The VISOTWO DVD Receiver is a technologically advanced and highly capable
product — yet we have invested great eort in making it simple and easy
to use. The VISO TWO delivers a range of genuinely useful options for stereo
listening, using powerful digital signal processing and superbly accurate
digital-audio circuitry. However, we have also been careful to ensure that
the VISO TWO is as musically transparent and spatially accurate as possible,
incorporating much of what we’ve learned from a quarter century’s experience
designing audio and home-theater components. As with all our products,
NAD’s “Music First”design philosophy guided the VISO TWO’s design, such
that it can condently promise you both state-of-the-art home-theater and
audiophile-quality music listening for years to come.
We encourage you to take a few minutes now to read right through this
manual. Investing a little time here at the outset might save you a good
deal of time later, and is by far the best way to ensure that you make the
most of your investment in the NAD VISO TWO, and get the most from this
powerful and exible home-theater component.
One more thing: We urge you to register your VISO TWO ownership on the
NAD Worldwide Web site:
http://NADelectronics.com/warranty
For warranty information contact your local distributor.
IMPORTANT SAFETY INSTRUCTIONS ...........................2
INTRODUCTION
ABOUTVISOTWO................................................6
EASEOFUSE.........................................................6
RS232................................................................6
UPGRADABILITY......................................................6
ABOUT THE HTR 6 SYSTEM REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . .6
GETTINGSTARTED...............................................7
WHAT’SINTHEBOX..................................................7
CHOOSINGALOCATION .............................................7
QUICKSTART.........................................................7
IDENTIFICATION OF CONTROLS
FRONTPANEL....................................................8
REARPANEL ....................................................10
SETUP
SETTINGUPTHEVISOTWO......................................12
ABOUT THE ONSCREEN DISPLAY OSD. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
SELECTINGSOURCES............................................... 12
ADJUSTINGTHEVOLUME .......................................... 12
ADJUSTING THE SUBWOOFER LEVEL TRIM “ON THE FLY”. . . . . . . . . . . . 13
ADJUSTINGTHETONECONTROLS.................................. 13
FACTORYDEFAULTSETTINGS ...................................... 13
OPERATION
USING THE VISO TWO – AUDIO SETUP MENU. . . . . . . . . . . . . . . . . . . . . 14
AUDIOSETUPMENU............................................... 14
LISTENINGMODE .................................................. 14
INPUT SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
SPEAKERSETTINGS................................................. 15
CHANNELLEVELS.................................................. 15
USING THE VISO TWO – VIDEO SETUP MENU . . . . . . . . . . . . . . . . . . . . .16
VIDEOSETUPMENU................................................ 16
DISCVIDEO......................................................... 16
HDMIRESRESOLUTION........................................... 16
DISCAUDIO........................................................ 17
DISCLANGUAGE................................................... 17
PARENTALCONTROL............................................... 17
DIVXSETUP ........................................................ 18
OSDLANGUAGE.................................................... 18
USINGVISOTWO–FEATURES...................................19
ABOUT THE VISO TWO INTERNAL DVD PLAYER . . . . . . . . . . . . . . . . . . . . . 19
REGION MANAGEMENT INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
DISCLOADINGANDPLAYBACK .................................... 19
TITLEANDMENUBUTTONS........................................ 19
RANDOM........................................................... 19
REPEAT............................................................. 20
SLOW............................................................... 20
STILL PICTURE AND FRAMEBYFRAME PLAYBACK . . . . . . . . . . . . . . . . . 20
ZOOM.............................................................. 20
PROGRAMMING.................................................... 20
PLAYINGMP3/WMA/JPEG.......................................... 21
TIMERSETUP....................................................... 21
AUTOMATIC POWER OFF FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
USING THE VISO TWO - AM/FM/DB/iPod . . . . . . . . . . . . . . . . . . . . . . . . . 22
LISTENINGTOAM/FMRADIO....................................... 22
ABOUTANTENNAS................................................. 22
ASSEMBLINGTHELOOPANTENNA................................. 22
SELECTINGTHERADIO............................................. 22
SETTINGRADIOPRESET............................................ 22
CHOOSINGTUNERMODE.......................................... 23
ABOUTUSERNAMES............................................... 23
ABOUTRDS ........................................................ 23
VIEWINGRDSTEXT................................................. 23
ABOUTDABRADIO................................................. 23
CONNECTINGTHEDABMODULE .................................. 23
DABOPERATION ................................................... 24
SERVICELIST ....................................................... 24
DABTUNERMODE ................................................. 24
LOCALSCAN....................................................... 24
PRESETTUNE....................................................... 24
STATIONORDER.................................................... 24
DYNAMIC RANGE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
TUNEAID........................................................... 25
PRUNELIST......................................................... 25
INFORMATIONSETTINGS........................................... 25
ABOUTXMRADIO.................................................. 26
ABOUTTHEiPodINPUTFEATURE................................... 26
CONNECTING THE OPTIONAL “NAD IPD 1 DOCK WITH
iPod”AND iPod PLAYER TO THE VISO TWO . . . . . . . . . . . . . . . . . . . . . . . . . . 26
iPodMENUOPTIONS............................................... 27
CONTROLFEATURES............................................... 27
TO VIEW VIDEOS OR PHOTOS LOADED IN YOUR iPod . . . . . . . . . . . . . . . 27
USING THE HTR 6 REMOTE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
SPECIFICATIONS.................................................... 28
CONTROLLINGTHEVISOTWO...................................... 28
LEARNING CODES FROM OTHER REMOTES. . . . . . . . . . . . . . . . . . . . . . . . . 29
PUNCHTHROUGH................................................. 29
COPY COMMAND FROM ANOTHER BUTTON . . . . . . . . . . . . . . . . . . . . . . . 29
MACROCOMMANDS............................................... 29
BUTTONILLUMINATIONTIMEOUT.................................. 30
FACTORYRESET.................................................... 30
DELETEMODE...................................................... 30
LOADINGCODELIBRARIES......................................... 31
SEARCHMODE..................................................... 31
CHECKING CODELIBRARY NUMBER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
SLEEPMODE....................................................... 31
REFERENCE
TROUBLESHOOTING ............................................32
SPECIFICATIONS................................................33
5
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

INTRODUCTION
ABOUT VISO TWO
Though the VISO TWO is among the most technically sophisticated DVD
Receivers, we worked hard to make it one of the most musically transparent
home-theater components available as well; this is what we mean by NAD’s
“Music First”design philosophy. Here are just few examples:
• High-performance components used throughout VISO TWO’s analog
audio circuits to maximize quality from all sources, including multi-
channel analog sources such as DVD-Audio.
• The VISO TWO has exceptional playability. It has support for DVD-Video,
DVD-R/-RW/+R/+RW, DVD-A, SVCD with or without PBC (Play Back
Control), VCD, DivX, Audio CD, CD-R/-RW and including recorded MP3,
copyright-protected WMA and JPEG les.
• An RS-232 port for advanced zone control and software update through
a Windows® compatible PC.
• Gold-surfaced connectors are employed throughout to ensure
maximum signal integrity.
EASE OF USE
Despite the eort NAD has invested in the VISO TWO’s sonic performance,
we expended no less in making it powerfully easy to use. Its design is
uniquely simple for so sophisticated a component, and the HTR 6 universal
remote control is equally understandable, as are the VISO TWO’s own front-
panel and on-screen displays.
RS 232
Flexible system conguration is possible with the RS-232 interface and
NAD’s proprietary Windows® compatible software. We are also certied
partners with AMX and Crestron and fully support these external devices.
This interface allows complete remote control of the VISO TWO from
any remote location via the PC. Complete remote control functionality is
available to the user by interface software. See your NAD audio specialist for
further information.
UPGRADABILITY
The VISO TWO permits exible system growth. We have made the more
likely scenario of software upgrades easy to accomplish via the high speed
RS-232 port on the rear panel (and in combination with the LOAD SW
switch also on the rear panel). Owners who register their VISO TWO on
our international web site www.NADelectronics.com will be advised of
updates. Some of these may be free of charge, and some may require
royalty payments depending on the type of upgrade. The advanced user
will be able to perform these upgrades by downloading les from our web
site, via e-mail and installing them by connecting the VISO TWO to a PC.
Alternatively the dealer from whom you purchased your VISO TWO should
be able to assist in performing these upgrades.
ABOUT THE HTR 6 SYSTEM REMOTE CONTROL
Packed with your VISO TWO is the NAD HTR 6 remote control, a full-system
remote especially designed for easy use and understanding. Be sure to
read the section “Using the HTR 6 Remote Control”, to familiarize yourself
with the remote’s layout and operations before proceeding to setup
your VISO TWO. You may opt to use your HTR 6 as your primary way to
command your entire AV system. The HTR 6 can be employed to operate
additional NAD or other-brand components such as a DVD/CD player,
television, satellite/HDTV tuner, VCR, or virtually anything else that operates
via standard infrared remote.
6
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

WHAT’S IN THE BOX
Packed with your VISO TWO you will nd
• An AM loop antenna.
• A FM ribbon-wire antenna with balun.
• A removable AC cable (if you wish, any IEC-standard AC cable of suitable
wattage may be substituted).
• The HTR 6 remote control with 4 (four) AAA batteries.
• This owner’s manual.
SAVE THE PACKAGING
Please save the box and all of the packaging in which your VISO TWO
arrived. Should you move or otherwise need to transport your VISO TWO,
this is by far the safest container in which to do so. We’ve seen too many
otherwise perfect components damaged in transit for lack of a proper
shipping carton, so please: Save that box!
CHOOSING A LOCATION
Choose a location that is well ventilated (with at least several inches to
both sides and behind), and that will provide a clear line of sight, within
23 feet/7 meters, between the VISO TWO’s front panel and your primary
listening/viewing position—this will ensure reliable infrared remote control
communications. The VISO TWO generates a modest amount of heat, but
nothing that should trouble adjacent components.
It is especially important that sucient ventilation be provided. If you
are contemplating on locating the VISO TWO within a cabinet or other
furniture, consult your NAD audio/video specialist for advice on providing
adequate airow.
QUICK START
In case you simply cannot wait to experience the performance of your
new NAD VISO TWO, we provide the following “Quick Start” instructions to
get you underway. Before the steps below, connect your VISO TWO to a
TV/monitor.
Please make all the connections to your VISO TWO with the unit unplugged.
It is also advisable to power-down or unplug all associated components
while making or breaking any signal or AC power connections.
PLAY A CD OR DVD MOVIE
• Connect the VISO TWO’s composite Video or S-Video “MONITOR OUT”
jack to your TV/monitor’s corresponding input.
• Connect your speakers to the VISO TWO’s“L” and “R” terminals. Make
sure to connect red to red (“+”) and black to black (“-”) with care to
avoid stray wires or strands crossing between terminals. If your system
includes a powered subwoofer, connect the VISO TWO’s “SUBWOOFER
PRE-OUT” jack to its line input.
• Connect the AC cord to the AC inlet and then plug into an AC outlet;
the LED indicator around the POWER button will be illuminated amber
indicating the VISO TWO is in standby mode ready to accept commands
from either the front panel power switch or the HTR 6 remote.
• Press“DVD” at the HTR 6 remote’s Device Selector section and then
“OPEN/CLOSE” button.
• Insert the media and press [ PLAY] button to start playback.
You should hear sound from VISO TWO, and see an image on the
TV/monitor. (If one or the other fails to appear, check your TV/monitor’s
input settings or VISO TWO’s audio/video connections).
Enjoy the movie or music, but be sure to set aside time to read this manual
thoroughly, and to set up, calibrate, and congure your VISO TWO carefully
and completely.
INTRODUCTION
GETTING STARTED
7
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

1 POWER BUTTON: Press this button or the HTR 6 remote’s [ON] button
to switch ON the VISO TWO. The Standby LED indicator will turn from
amber to blue and illuminate the VFD. Pressing the power button again
or HTR 6’s [OFF] button turns the unit back to standby mode.
Note that when you do choose to switch OFF to standby using the front
panel Power button, the VISO TWO’s memory back-up system will store
channel level, tuner preset, and other settings for several weeks while
the unit is switched o.
Pressing the [OPEN/CLOSE] button on the front-panel or the HTR 6
remote’s [ ] button will switch ON the VISO TWO from standby mode
and at the same time open the disc tray.
NOTE
It takes around 10 seconds for VISO TWO to switch to full standby mode
when it is powered OFF from source inputs other than DVD mode. In this
condition, it also takes around 10 seconds for the standby LED to switch
from blue to amber color.
2 STANDBY LED: This indicator will light up amber when the VISO TWO
is in standby state. When the VISO TWO is at ON state, this indicator will
illuminate blue.
3 NAVIGATION AND ENTER BUTTONS: The navigation buttons
[PRESET / ] / [TUNE / ] in conjunction with the [ENTER]
button allows one to navigate the OSD, title and menu options.
In AM/FM/XM mode, use [PRESET / ] to step up or down
between radio presets.“Unused”presets are skipped over. Note that
Presets must have been previously stored. Refer also to the item on
“SETTING RADIO PRESET”under “OPERATION - USING THE VISO TWO
– AM/FM/DB/iPod” discussions.
Pressing momentarily the [TUNE / ] button will manually scan the
AM or FM band. Press and hold for more than 2 seconds to search up or
down; the VISO TWO’s tuner will stop at the next suciently strong signal it
encounters. Note that this function, too,“wraps”and will continue searching
up or down from one end of the AM or FM band to the other.
At DVD mode, press [ ] to skip forward or [ ] to skip backward a
track, le or chapter. Press [ / ] during disc playback to select the
desired scanning speed.
When setting up the Timer, use the [ / ] buttons to change the
hours and minutes.
4 MENU: Press this button to bring up the DVD disc menu during DVD
disc playback, stop, pause or stop-resume mode. At FM/XM/DAB mode,
the MENU button also functions the same way as that of TUNER MODE
button. See also TUNER MODE description below.
5 DISPLAY: At TUNER mode, toggle this multifunction button to display
at the VFD relevant information of a currently tuned FM, XM or DAB
station.
At CABLE/SAT, VCR or Front source mode, toggle DISPLAY button to
select optical, coaxial audio input or the assigned analog audio input of
the particular source.
When in DVD mode, toggle DISPLAY button to alternatively display the
general disc playback status of the DVD display navigation menu.
6 MEMORY: Use to store tuned stations to the VISO TWO’s preset-
memory locations. Refer also to the item on “SETTING RADIO PRESET”
under “OPERATION - USING THE VISO TWO – AM/FM/DB/iPod”
discussions.
7 REMOTE SENSOR: Point the HTR 6 remote control at the remote
sensor and press the buttons. Do not expose the remote sensor
of the VISO TWO to a strong light source such as direct sunlight or
illumination. If you do so, you may not be able to operate the VISO TWO
with the remote control.
Distance: About 23ft (7m) from the front of the remote sensor.
Angle: About 30o in each direction of the front of the remote sensor.
8 VACUUM FLUORESCENT DISPLAY (VFD): Provides visual
information about the unit’s important modes, settings, functions,
status of the current source like disc playback time and other indicators.
9 TIMER ON/OFF: In combination with [PRESET / ] and
[MEMORY] buttons, press and hold or toggle to set the internal clock,
ON/OFF timer as well as enable the timer modes. Refer also to the
item on “TIMER SETUP”under “OPERATION – USING THE VISO TWO
– FEATURES” discussions.
10 FM/AM/DB: Toggle this button to select either AM, FM, DAB (Europe
version) or XM (North America version) tuner functions.
IDENTIFICATION OF CONTROLS
FRONT PANEL
3 4 5 6 7 8 9 10 11 12 13
21 19 16 15 14
1 2
171820
8
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

11 TUNER MODE: In FM mode, this button will toggle between FM Stereo
and FM mono. Select FM Mono (FM STEREO and FM MUTE icons at VFD
are extinguished) for stations that have too much interference or are
too weak. In DAB (European version only) or XM (North America version
only) radio, this button enables the digital radio menus in conjunction
with the Navigation button and ENTER buttons.
At FM/XM/DAB mode, the MENU button also functions the same way as
that of TUNER MODE button.
12 TONE: Press to toggle through Bass, Treble, Tone Defeat and Tone
Active options. Use the VOLUME knob to adjust the Bass and Treble
levels. While at either Bass or Treble mode, rotate VOLUME knob
clockwise or counterclockwise to adjust the Bass or Treble level within
the range ±12dB.
13 VOLUME: Turn clockwise to increase the master-volume setting;
counter clockwise to lower it. The VOLUME knob is also used to
increment/decrement the Bass and Treble levels.
14 INPUT SELECTOR: Use to select an audio/video input source along
with its assigned analog or digital inputs. Rotate clockwise or counter
clockwise to select - Internal DVD Cable/Sat VCR (iPod) Front
AM/FM/XM (DAB) then back to Internal DVD.
15 SURROUND MODE: Toggle to select through the SURROUND MODE
options. See also the section “LISTENING MODE” under “OPERATION
- USING THE VISO TWO – AUDIO SETUP MENU” discussions.
NOTES
• Depending on the format of the currently selected input (digital or
analog), dierent surround modes will be available.
• For best results when recording to a VCR, select “Mode: Stereo” and “Sub:
O” in the applicable Setup Menu OSD.
16 STOP: During disc playback, press this button to STOP and at the same
time PAUSE disc playback –“RESUME”will be shown at the VFD. Press
[PLAY/PAUSE] button to resume play from the spot it was stopped. If [STOP]
button is pressed consecutively during playback, disc playback will fully
stop. At full stop mode,“STOP”will be shown in the VFD for DVD playback,
total number of tracks and total playback time for CD playback and
“CLIPMENU”is displayed in the case of MP3/WMA/JPEG le playback.
17 PLAY/PAUSE: Press this button to toggle between Play and Pause
of a compatible disc. If the disc tray is open, press this button to
automatically close the tray and start playback if a disc is loaded.
18 OPEN/CLOSE: Press this button to open and close the disc drawer and
simultaneously select the internal DVD/CD player. Pressing this button
will also switch ON the VISO TWO from standby mode and at the same
time open the disc tray.
19 DISC TRAY: With the DISC TRAY open, insert a DVD, VCD, CD or other
compatible media disc face down onto the tray. If the disc is placed
upside down and it is a single sided disc,“NO DISC” appears on both the
VISO TWO’s VFD and the TV/Monitor screen.
20 FRONT INPUT: Use these convenience jacks for occasional sources
such as a camcorder, tape player, or a video game console or any
other analog audio, or composite or S-Video video source. Select the
“Front”source input using the HTR 6 remote or the front panel INPUT
SELECTOR knob.
If your source has a single audio out jack only or is marked“mono
output”, plug this into the VISO TWO’s FRONT INPUT“R (MONO)” input.
On the other hand, if your source has two output jacks indicative of
stereo output, insert both jacks into the VISO TWO’s corresponding
FRONT INPUT “L” and “R (MONO)”input to achieve stereo output as well.
21 PHONES: Accepts stereo headphone using a standard 1/4-inchstereo
phone plug (use a suitable adaptor for headphones equipped with a
smaller plug). Plugging in headphones automatically mutes output
from all channels’speakers but not from the AUDIO OUT jacks of the
VCR and SCART OUT (Europe version only). See also the item on DOLBY
HEADPHONE under the LISTENING MODE section of AUDIO SETUP
MENU discussion.
IDENTIFICATION OF CONTROLS
FRONT PANEL
9
ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

1 SPEAKERS: Connect the left and right terminals to the corresponding
loudspeakers. Each output’s“+” (red) terminal and “-”(black) terminal
must be connected to the corresponding “+”and “-” terminals of the
loudspeaker. Use extra care to ensure that no stray wires or strands cross
between posts or terminals at either end.
NOTES
• Use stranded wire of at least 16-gauge (AWG); specialized speaker cable
may be valuable (consult your NAD audio specialist). Connections to
the VISO TWO can be made with banana-type plugs, or using bare wire,
or pins, by loosening the terminal’s plastic nut, making a clean, neat
connection, and re-tightening carefully (use the transverse hole through
the post for bare-wire or pin connections). To minimize the danger
of short-circuits, ensure that only 1/2-inch of exposed wire or pin is
employed in connecting.
• Thisunitisdesignedtoproduceoptimum sound qualitywhenconnectedto
speakerswithimpedanceswithinthereceiver’soperatingrange. Pleasecheck
thatspeakersare ratedto be8ohmsminimum per speaker.
2 FM ANTENNA INPUT: The supplied wire“dipole”FM antenna will
connect to the FM connector using the supplied “balun” adapter. It will
usually work best when mounted on a vertical surface such as a wall,
with arms fully outstretched forming a horizontal“T” perpendicular to
the origin point of the signal.
3 AM ANTENNA INPUT: Connect the supplied AM loop antenna to
these terminals. If an external AM antenna is used, make connections to
the AM and GND terminals in accordance with the instructions supplied
with the antenna. See also section about “LISTENING TO AM/FM RADIO”.
4 CABLE/SAT & VCR: Connect to these inputs S-Video, composite
video, and analog audio from source components such as cable TV
decoders, satellite tuners, another DVD player or other applicable
ancillary devices. VCR may be used with recording components such
as videocassette or DVD-recorders. Connect the VCR OUT (audio/video)
to these components’corresponding audio/video input. Note that VCR
may freely be used for play-only components, in which case their OUT
jacks would remain unconnected.
5 SUBW (SUBWOOFER) PRE OUT: Connect this output to a powered
(active) subwoofer or to a power amplier channel driving a passive system.
6 DAB MODULE INPUT (Europe version only): Plug-in the other end
of the Mini-Din connector from the NAD DAB Adaptor DB 1 module
output port into this socket. The VISO TWO is compatible only with
NAD DAB Adaptor DB 1 so check with your NAD dealer for this module’s
availability. With DAB, you can receive CD-like quality programs without
any annoying interference and signal distortion.
7 MP DOCK: The VISO TWO is equipped with a data port in the rear
panel where an optional “NAD IPD 1 Dock with iPod”(NAD IPD 1) can be
plugged in. Connect the “MP DOCK (DATA PORT)” jack of the VISO TWO
to the corresponding “DATA PORT”socket of the optional NAD IPD 1.
8 COAXIAL IN, OPTICAL IN: Connect to the optical or coaxial S/PDIF-
format digital output of sources such as CD or DVD players, HDTV or
satellite tuners and other components.
IDENTIFICATION OF CONTROLS
REAR PANEL
ATTENTION!
Please make sure that the VISO TWO is powered o or unplugged before making any connections. It is also advisable to power-down or unplug all
associated components while making or breaking any signal or AC power connections.
1 4 5 6 7 8 9 10 11 12
15 18 19
2 3
16 17 20
13 14
European version only
European version only
European version only
North American
version only
North American
version only
10
ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ