NANO BTE 4 User manual

2B
2B
CASE
RIGHT
LEFT
CASE
RIGHT
LEFT
CASE
VENTED DOME CLOSED DOME
1
BTE4 HEARING AIDS AND CHARGING CASE
Hearing aids should be fully charged before using for the
first time.
Indicator Light on Charging Case
Orange lights Hearing aid is charging
Green lights Hearing aid is fully charged
It will take approximately 3.5 hours to fully charge hearing aids.
For detailed information on how to use your BTEs,
please refer to the User Manual. STEP ONE
Charge Your Hearing Aids
BEHIND THE EAR
OTC HEARING AIDS
2
Blue indicator for left ear.Red indicator for right ear.
STEP TWO
Insert Hearing Aids
UM-BT--V
Quick
Start
Guide Dome
Thin Tube
Color Coded Right/
Left Indicators
Lower Button
Upper Button
Microphone
Stabilizer
Micro USB charging port
Hearing aid
battery indicators
Charging case
battery indicator
Right charging well
Left charging well

34
Grasp thin tube bend at the entrance of the ear canal.
Gently pull thin tube out of ear, removing dome from ear.
Remove hearing aid from behind the ear.
Wipe dome clean from any wax, oils, moisture, etc.
Power aid off. Place aid in charging case when not in use.
Hold the thin tube bend with your thumb and finger as
shown. Gently insert the dome into your ear canal.
Using your finger, position the stabilizer into the curvature
of your ear. The stabilizer helps keep the aid secure in your ear.
STEP THREE
Make Adjustments to Your
Hearing Aid Using the Upper
and Lower Button
STEP FOUR
Remove Hearing Aid
Tip: To avoid feedback/chirping when aid is being
removed, turn aid off prior to removal.
Place hearing aid behind your ear.
Turn hearing aid on.
If hearing aid is off, press and hold the lower button for 3 seconds
until the hearing aid turns on.
STEP TWO, CONT... STEP TWO, CONT...
seconds
Quick Press
VOLUME INCREASE
UPPER BUTTON
Press & Hold
TURN ON & OFF
Quick Press
VOLUME DECREASE
LOWER BUTTON
Press & Hold
CHANGE PROGRAM
seconds