NANO BTE PLUS User manual

1
BTE PLUS HEARING AIDS AND CHARGING DOCK
Hearing aids should be fully charged before using for the
first time.
When properly inserted in the charging dock, the light in the
center of the hearing aid rocker switch will illuminate.
Indicator Lights on Rocker Switch
Blue light Hearing aid is charging
Green light Hearing aid is fully charged
It will take approximately 3.5 hours to fully charge hearing aids.
For detailed information on how to use your BTEs,
please refer to the User Manual. STEP ONE
Charge Your Hearing Aids
BEHIND THE EAR
OTC HEARING AIDS
Dome
Microphones
Thin Tube
Color Coded
Right/Left
Indicators
Rocker Switch
Stabilizer
Left charging well Right charging well
Charging Light
Charging Port
Charging Indicator Light
2
Blue indicator for left ear.Red indicator for right ear.
STEP TWO
Insert Hearing Aids
UM-BTP-23-V1
Quick
Start
Guide

34
Grasp thin tube bend at the entrance of the ear canal. Gently pull
thin tube out of ear, removing dome from ear.
Remove hearing aid from behind the ear.
Wipe dome clean from any wax, oils, moisture, etc.
Power aid off. Place aid in charging dock when not in use.
For information on using the Nano Hearing App to control the
volume or programs, please reference the User Manual.
Hold the thin tube bend with your thumb and finger as
shown. Gently insert the dome into your ear canal.
Using your finger, position the stabilizer into the curvature
of your ear. The stabilizer helps keep the aid secure in your ear.
STEP THREE
Make Adjustments to Your Hearing
Aid Using the Rocker Switch
STEP FOUR
Remove Hearing Aid
Tip: To avoid feedback/chirping when aid is being
removed, turn aid off prior to removal.
Place hearing aid behind your ear.
Turn hearing aid on.
If hearing aid is off, press and hold the upper portion of the rocker
switch for 4 seconds until the hearing aid turns on.
Press & Hold
TURN ON ( LIGHT)
TURN OFF ( LIGHT)
seconds
seconds
Quick Press
VOLUME INCREASE
UPPER ROCKER SWITCH
Press & Hold
CHANGE PROGRAMS
Quick Press
VOLUME DECREASE
LOWER ROCKER SWITCH
STEP TWO, CONT... STEP TWO, CONT...