NAPCO C 200 AP User manual

Upon installation, a NAPCO Adaptive
Microwave/PIR Detector powers up,
initialized in the first of its 12 senstivity
modes, i.e., the most sensitive, enabling
it to sample prevailing environmental
conditions. Faced with hostility or
tranquility, the Adaptive detector
automatically selects the most appropriate
detection mode accordingly, optimizing
both intruder catch and stability. Each time
the sensors detect a stimulus stong enough
to generate a signal, but insufficient in
strength to indicate an alarm, the detector
will automatically change sensitivity modes,
effectively widening the gap between the
detected signal and its alarm threshold.
Therefore, environmental disturbances,
those that register by the PIR and/or
microwave sensor, are better tolerated and
the threat of false alarms or nuisance alarms
is dramatically reduced, far surpassing
the performance of conventional dual
technology devices.
Napco Adaptive® C200AP also includes
P.E.T. ™, profile enhanced targeting
circuitry and Vari-Pet optics, to provide
the ultimate pet/animal protection, for up
to 100lb. (45.36kg) pet immunity! And,
most-importantly, because a dynamic
Adaptive Detector literally adjusts to its
surroundings minute-by-minute, once the
pet vacates or other nuisance disturbances
abate, e.g., the space heater turns off
again, the air conditioner stops blowing
the blinds, power stops browning-out,
-- this intelligent detector again elevates
its sensitivity, mode by mode—so the
premises always enjoys the greatest level
of fast intruder-catch detection and false
alarm protection possible.
The most forgiving sensor to install
available, Adaptive Sensors are so smart
and make the sensitivity and critical
range adjustments an experienced alarm
professional would, if one were standing
by, 24-hours a day, seven days a week to
make them. Any activity beyond the unit’s
protected area, detected by the microwave
section is also automatically compensated
for. The unit even actively tests both its
channels (PIR and Microwave), regulary
activating each, to make sure it is on-the-
job, performing to specification.
Manufacturing great security products is all we do. It’s that simple.™




































































C200AP
standard
wide angle
lens
NAPCO’s Adaptive® Dual
Microwave/PIR Detectors
continuously adjust to their
environment, providing 100lb.
(45.4kg) pet/animal immunity
and ultimate reliability & false
alarm protection

FEATURES
• Broad range and wide angle coverage suitable for most residential &
commercial installations worldwide: C200AP Series 40 x 40’, max. (10.6 x
10.6m); C200AP52 (European model).
• Patented Adaptive® technology continuously monitors and dynamically
self-adjusts the sensor to its environment. This ensures intruder “catch”
sensitivity is optimized minute-by-minute, while “phantom” false alarm
sources, such as pets/animals, fans, sunlight, HVAC, are simultaneously
counteracted.
• Smart microprocessor-based false alarm discrimination. The on-board A
to D conversion microprocessor (Analog-to-Digital) analyzes all incoming
microwave and PIR detected signals against its built in library of waveform
signatures of known false alarm sources, like heaters, fans, blowing drapes/
blinds and animals. The product of decades of sensor engineering and
expertise, this inherent signal processing intelligence, enables Adaptive®
Detectors provides unsurpassed false alarm discrimination the reliability and
accuracy will save both time and money.
• P.E.T.TM - Profile Enhanced Targeting for revolutionary 100lb. (45.36kg)
pet immunity. Intelligently distinguishes animals, when present, from
intruders; then automatically resensitizes when pets vacate protected areas.
• 12 automatically-selected, dynamic Adaptive® detection modes for
optimal “intruder catch” and stability. (Modes 1-12: 1 most sensitive, 12
most stable).
• Dual technology microwave and PIR signal verification. The detector
combines the strengths of both heat- and motion-sensitive detection
technologies to dually verify alarm conditions for ideal false alarm
discrimination.
• “Smarter System” Panel and Sensor Integration Input: Automatically
coordinates sensor sensitivity with panel status (armed, disarmed, arming in
process, etc.)
• Active, automatic self-testing of all key components and circuits. The unit
will internally generate both a PIR signal and a microwave signal, in intervals
of 11- 16 hours, which will fully test both channels independently. Any failure
or internal trouble will be reported to the system for quick remedy, avoiding
any false sense of security or breach thereof.
• Superior RFI-/EFI-/lightning shielded protection. Key components and
resilient SMD circuitry are electronically-shielded to 30V/m. This protects the
unit’s proper performance from nuisance interference due to static discharge,
power surges, electric spikes, etc.
• 2 Vari-Pet field-changeable lenses supplied for application optimized
field-of-view. Napco’s custom-engineered aspheric fresnel lenses are carefully
designed to provide the ideal wide angle lens array and are easily-aimable
during installation. Additional field-changeable lenses available: Barrier and
Long Range.
• Critical Range Control. Although the unit will adapt to effectively ignore
activity/interference beyond the protected area, the detector enables
manual, customizable range with a calibrated adjustable potentiometer to
fine-tune range during walk-test, if desired.
• True Automatic Temperature Compensation. The unit’s circuitry automatically
adjusts for seasonal and climate variances, providing accurate detection
despite extremes of heat or cold*.
• Fast, flexible mounting. The detector is conveniently installed on walls or
in a corner and may be more precisely aimed horizontally or vertically, and
offers an optional SVLBKT Swivel Bracket for 180º range of coverage. Large
wiring channel, generous terminal strip and captive PCB screw combine for
fast, trouble-free, neat installations every time.
• Tamper/Vandalism Supervision. Defeats acts to sabotage or vandalize the
NAPCO Product Availability Hotline – C all our Stock-Out Hotline at 1-800-645-9330 Press 1, pause then 2.
Or email us at [e-mail]
unit by reporting them to the system if opening the enclosure is ever
attempted. (International models also have secured enclosures for added
protection.)
• Added False Alarm Prevention Features. The unit employs myriad
features to ensure only valid alarms are reported in the system. This
includes properties of its circuitry and fresnel optics, which include integral
extra white light protection, a Napco-pioneered innovation.
• Compliances: UL, CUL, CE, INCERT, NFA2P, NCP
SPECIFICATIONS
• 40’ x 40’ (10.6m2) Maximum Range (dependent upon Vari-Pet Lens Installed)
• Operating Temperature: -10 to +50 degrees C (14 to 122 degrees F)
• Mounting: Wall or Corner, 7 to 8’ maximum
• Output Relay: Form A; Normally Closed
• Relay Time: Approx. 4 seconds
• Alarm Relay: 100mA, 24Vdc w/internal 10 ohm current-limiting resistor
• Trouble: Open collector current sinking with 39 ohm current
limiting resistor, 20mA, max
• Status Input: Panel disarmed, >5V armed, <1.5V
• Self-Test Interval: 11-16 hours
• Power Supply: Filtered 12Vdc
• Current Drain: Idle 33mA; Alarm 35mA
• Microwave: 10.525GHz ± 25MHz
• Dimensions: 4.5H x 2.5W x 2.3”D (11.4x6.4 x 5.8 cm)
• Shipping Weight: 7 oz. (200 gm)
NAPCO SECURITY GROUP
In North America 1-800-645-9445 • 631-842-9400
333 Bayview Avenue, Amityville, New York 11701 USA
www.napcosecurity.com
International
224 Europa Blvd, Gemini Business Park
Warrington WA5 7TN England UK
44 (0) 1925242428
Two decades of NAPCO sensor
engineering expertise combines to provide
its sensors with unsurpassed false alarm
prevention and intruder catch detection.
A398A
C200AP

























standard wide
angle lens











































C200AP
Publicly traded on
NASDAQ
NSSC