Nasco Life/form LF01063U User manual

Copyright © Nasco 1983 HC18000028INM30
ONLINE: NascoHealthcare.com
E-MAIL: [email protected]
PHONE: [phone]
ADDRESS: 901 Janesville Ave.
Fort Atkinson, WI 53538
HEALTHCARE
HEALTHCARE
Stump Bandaging
Simulators
LF01063U & LF01064U
INSTRUCTION MANUAL
5-Year Warranty
Other Compatible Simulators
LF01063U
LF01064U
LF00929U Surgical Bandaging
LF01028U Suture Practice Arm
LF01034U Suture Practice Leg
LF00929U
Front Back
LF01028U
LF01034U
HC18000028INM30.indd 1-2 10/10/18 8:16 AM

ABOUT THE SIMULATOR
Featuring the realism of appearance always found with Life/form®products, these
simulators consist of two separate parts to make the learning and demonstrating of
stump bandaging much more effective and convenient for teacher and student. These
simulators eliminate the need for live patients and gives the students an opportunity to
practice at their own pace.
LIST OF COMPONENTS
The upper torso includes the two arms, one amputated above the elbow, and the other
above the wrist. Both arms are slightly extended, as a patient would have their arm
while being bandaged. The compressibility of the material very closely duplicates that
of a live patient and makes the experience very lifelike. The lower half is designed in the
shape of a prone patient with legs slightly abducted. One leg is amputated below the
knee, and the other above the ankle. The stumps are formed in the traditional way to
add to the realism.
PROCEDURES THAT CAN BE PERFORMED ON THESE SIMULATORS
Most standard bandaging procedures can be practiced or demonstrated. The lower
torso is long enough to allow carrying the bandage around the body over the unin-
volved hip at the level of the iliac crest. (Note: There is no embedded palpable skeletal
material.) Both units can be used to demonstrate the attachment of prosthetic devices.
CARE OF SIMULATOR
Normal soil accumulated on the surface of the simulator can be removed with mild
soap and lukewarm water. Use Nasco Cleaner (LF09919U) to remove stubborn stains
from simulator. Simply spray soiled area and wipe clean with a soft cloth or paper
towels. Most kinds of adhesive bandages can easily be removed. Use only Glue-Off
(LF01023U) for removing residual adhesives. Apply a thin coat. Allow to dry, then rub
off in a circular motion.
CAUTIONS
Solvents or corrosive materials will damage the simulator. Never place simulator on any
kind of printed paper or plastic. These materials will transfer indelible stains. Ballpoint
pens will also make indelible stains.
SUPPLIES/REPLACEMENT PARTS FOR STUMP BANDAGING SIMULATORS
LF01023U Glue-Off
LF09919U Nasco Cleaner
Actual product may vary slightly from photo. Nasco reserves the right to change product color, materials,
supplies, or function as needed.
HC18000028INM30.indd 3-4 10/10/18 8:16 AM

ABOUT THE SIMULATOR
Featuring the realism of appearance always found with Life/form®products, these
simulators consist of two separate parts to make the learning and demonstrating of
stump bandaging much more effective and convenient for teacher and student. These
simulators eliminate the need for live patients and gives the students an opportunity to
practice at their own pace.
LIST OF COMPONENTS
The upper torso includes the two arms, one amputated above the elbow, and the other
above the wrist. Both arms are slightly extended, as a patient would have their arm
while being bandaged. The compressibility of the material very closely duplicates that
of a live patient and makes the experience very lifelike. The lower half is designed in the
shape of a prone patient with legs slightly abducted. One leg is amputated below the
knee, and the other above the ankle. The stumps are formed in the traditional way to
add to the realism.
PROCEDURES THAT CAN BE PERFORMED ON THESE SIMULATORS
Most standard bandaging procedures can be practiced or demonstrated. The lower
torso is long enough to allow carrying the bandage around the body over the unin-
volved hip at the level of the iliac crest. (Note: There is no embedded palpable skeletal
material.) Both units can be used to demonstrate the attachment of prosthetic devices.
CARE OF SIMULATOR
Normal soil accumulated on the surface of the simulator can be removed with mild
soap and lukewarm water. Use Nasco Cleaner (LF09919U) to remove stubborn stains
from simulator. Simply spray soiled area and wipe clean with a soft cloth or paper
towels. Most kinds of adhesive bandages can easily be removed. Use only Glue-Off
(LF01023U) for removing residual adhesives. Apply a thin coat. Allow to dry, then rub
off in a circular motion.
CAUTIONS
Solvents or corrosive materials will damage the simulator. Never place simulator on any
kind of printed paper or plastic. These materials will transfer indelible stains. Ballpoint
pens will also make indelible stains.
SUPPLIES/REPLACEMENT PARTS FOR STUMP BANDAGING SIMULATORS
LF01023U Glue-Off
LF09919U Nasco Cleaner
Actual product may vary slightly from photo. Nasco reserves the right to change product color, materials,
supplies, or function as needed.
HC18000028INM30.indd 3-4 10/10/18 8:16 AM

Copyright © Nasco 1983 HC18000028INM30
ONLINE: NascoHealthcare.com
E-MAIL: [email protected]
PHONE: [phone]
ADDRESS: 901 Janesville Ave.
Fort Atkinson, WI 53538
HEALTHCARE
HEALTHCARE
Slump Bandaging
Simulators
LF01063U & LF01064U
INSTRUCTION MANUAL
5-Year Warranty
Other Compatible Simulators
LF01063U
LF01064U
LF00929U Surgical Bandaging
LF01028U Suture Practice Arm
LF01034U Suture Practice Leg
LF00929U
Front Back
LF01028U
LF01034U
HC18000028INM30.indd 1-2 10/10/18 8:16 AM