Natec MOUSE LYNX User manual

1
INSTRUKCJA OBSŁUGI
MYSZ LYNX

2
OPIS PRODUKTU
Bezprzewodowa myszka optyczna Lynx w technologii Bluetooth to produkt opracowany z
myślą o najbardziej wymagających klientach. owoczesna stylistyka urządzenia oraz
pierwszorzędna precyzja i płynność ruchów kursora, zapewnia wysoki komfort użytkowania.
Wbudowana w mysz rolka umożliwia błyskawicznie przewijanie długich dokumentów, a
dodatkowe dwa przyciski szybką nawigację po stronach WWW. Produkt cechuje się także
niskim zużyciem energii, dzięki zastosowaniu zaawansowanym trybów hibernacji. Urządzenie
posiada 6 przycisków – w tym przycisk do zmiany DPI. Dostępne poziomy DPI to 800-1200-
1600 i mogą być ustawiane w zależności od preferencji użytkownika.
SPECYFIKACJA PRODUKTU
Bezprzewodowa mysz optyczna Bluetooth
Typ sensora: optyczny
Rozdzielczość: 800 dpi – 1600 dpi
Liczba przycisków: 6
Częstotliwość fal radiowych: 2,4 GHz
Liczba i rodzaj baterii: 2 x AAA alkaiczne
Typ profilu myszy: uniwersalny, dla prawo- i leworęcznych
Wymiary produktu: 95,0*66,7*37,5 (D*SZ*W,mm)
Waga produktu: 59,4±5,0gm (bez baterii i odbiornika)
Class 1 LED Prod ct
KOMPATYBILNOŚĆ PRODUKTU
Protokół Bluetooth w wersji 2.1
Profil Bluetooth Human Interface Device
Systemy operacyjne Microsoft Windows 2000/XP/Vista oraz Mac 10.1 lub wyższy

3
CECHY PRODUKTU
ZAWARTOŚĆ OPAKOWANIA
•Mysz optyczna Bluetooth,
•Instrukcja obsługi,
•2 x baterie alkaiczne AAA.
PRZEWODNIK INSTALACJI SPRZĘTU
1. Umieszczanie baterii w myszy:
•otwórz pokrywę baterii,
•umieść 2 baterie alkaliczne AAA w odpowiednim kierunku,
•zamknij pokrywę baterii.
Uwaga: włącznik ON/OFF musi być przełączony na pozycję ON w celu rozpoczęcia uży kowania myszki.
lewy przycisk
Środkowy przycisk – scroll
Wybór dpi i wskaźnik
naładowania baterii
Przejdź do następnej strony
Prawy przycisk
Przejdź do poprzedniej strony
#

4
2. Podłączanie odbiornika do komp tera:
•Zanim zaczniesz instalacje myszy, upewnij się, że zakończyłeś instalację odbiornika
Bluetooth w komputerze,
•aciśnij przycisk CO ECT na spodzie myszki. Czerwone światełko powinno się
zapalić,
•Kliknij dwukrotnie w swoim komputerze ikonkę Bluetooth i wybierz
zaawansowaną konfigurację programu,
•Wykonaj poszczególne kroki według programu instalacyjnego,
•Teraz twoja mysz powinna być gotowa do użytku.
WSKAŹNIK NAŁADOWANIA BATERII
Kiedy poziom baterii jest niski wówczas dioda LED umieszczona na wierzchu myszy zacznie
migać. Oznacza to, że użytkownik powinien wymienić baterie na nowe.
OPIS UŻYTEGO DPI
rozdzielczość
800dpi 1200dpi 1,600dpi
Sposób
zachowania
diody LED
Dioda LED zaświeci
jeden raz i wyłączy
się
Dioda LED będzie
migać przez 8 sek. i
wyłączy się
Dioda LED będzie
świecić przez 8
sek. i wyłączy się
Przycisk CO ECT
Wskaźnik połączenia

5
Zauważ, że:
•Każda zmiana poziomu DPI wymaga naciśnięcia przycisku przez minimum pół
sekundy,
•Każdy poziom DPI po włączeniu pokazuje przez 8 sekund zas osowany poziom
rozdzielczości, w ym czasie nie możesz przejść do kolejnego poziomu.
WYŁĄCZANIE MYSZY
a spodzie myszy został umieszczony wyłącznik/włącznik urządzenia. W celu wyłączenia
myszy należy ustawić przełączniku na pozycję OFF.
HIBERNACJA i WŁĄCZANIE MYSZY
Kiedy mysz nie jest używana przez dłuższy czas przechodzi w stan uśpienia. Aby wznowić
dzianie myszy wystarczy nią poruszyć. Kiedy mysz jest wyłączona całkowicie przyciskiem OFF,
należy ustawić włącznik w pozycji O i poruszyć mysz, aby zaczęła działać.
TRYBY ZARZĄDZANIA ENERGIĄ
Tryb Opis
Tryb czuwania 1 Mysz przechodzi w tryb czuwania 1 po 3 sekundach nie używania myszy
Tryb czuwania 2
Przejście z trybu czuwania 1 do trybu 2 następuje po kolejnych 3
sekundach nie używania myszy
Tryb hibernacji
Przejście w tryb hibernacji następuje po 8 minutach nie używania myszy.
Aby mysz zaczęła ponownie działać, wystarczy nią poruszyć

6
UWAGI OGÓLNE
•ie używaj produktu w gorącym, zimnym, zakurzonym bądź zawilgoconym otoczeniu.
•Upuszczenie, bądź uderzenie myszki może spowodować uszkodzenie urządzenia,
podrapanie obudowy, bądź inną usterkę produktu.
•ieautoryzowane próby rozkręcania urządzenia powodują utratę gwarancji i mogą
spowodować uszkodzenie produktu.
•Produkt bezpieczny, zgodny z wymaganiami UE.
•Produkt wyprodukowany zgodnie z europejską normą RoHS. Jej celem jest zmniejszenie
ilości substancji niebezpiecznych, przenikających do środowiska z odpadów elektrycznych i
elektronicznych.
•Użycie symbolu WEEE (przekreślony kosz) oznacza, że niniejszy produkt nie może być
traktowany jako odpad domowy. Zapewniając prawidłową utylizację pomagasz chronić
środowisko naturalne. W celu uzyskania szczegółowych informacji dotyczących recyklingu
niniejszego produktu należy skontaktować się z punktem sprzedaży detalicznej, w którym
dokonano zakupu, lub organem władzy lokalnej.

7
USERS’S GUIDE
MOUSE LYNX

8
Getting Started
Thank you for purchasing the Bluetooth Optical Mouse. This Bluetooth Optical Mouse
features 6 button with scroll wheel and extra dpi select button, switchable 800-1200-1600
dpi sensitivity for users who require more precision with different types of applications.
Unique and ergonomic shape for maximum comfort and also has easy to hold. Please read
this manual thoroughly and follow the instruction procedures to prevent from any
equipment damage or personal injury.
Important Ergonomic Information
Some experts believe that using any mouse or trackball may cause serious injury to hands,
wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a
qualified health professional.
TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:
- Take frequent breaks, get up and walk around several times every hour.
- Vary your tasks throughout the day.
- Keep your shoulders relaxed with your elbows at your side. Properly position your mouse so
that you do not have to reach.
- Avoid resting your wrists on sharp edges.
System Req irement
- Laptop or PC with Bluetooth technology enabled
- Windows Vista, XP, 2000
Before yo begin
- Keep this installation guide for future reference! It contains Important Troubleshooting
Information.
- Keep your old mouse as a back-up device.

9
Operation G ide
Button definition:
There are six buttons on the mouse defined below:
Package Contains
Lynx Bluetooth Mouse package includes the following:
1. Bluetooth Optical Mouse
2. User’s manual
3. 2 AAA size of Alkaline batteries
ote:If any part is missing, please contact your dealer for a replacement immediately.
Preca tion
- The optical mouse cannot work on a glass or mirror surface. Avoid operating this mouse on
a glossy surface. Otherwise, this mouse may not operate normally.
- For consideration of saving battery power, it is strongly recommended to operate an optical
mouse on a bright surface with fine texture to obtain lower power consumption of the high
illumination LED. A very dark surface will cause higher power consumption.
- For a better transmission distance, avoid using this device on a metal plate or desktop
because a large surface of iron, aluminum, operating on a metal may cause the transmission
distance shorter.
Installation Guide (Mouse)
Step 1. Inserting the Batteries
1. Remove the battery compartment cover.
Button #1 – eft mouse click
Button #3 – Centre scroll wheel
Dpi selector & indicator
ow power indicator
Button #5
–
Internet Forwards
(Non-Programmable)
Button #4
–
Internet Backwards
(Non
-
Programmable)
Button#2–Right mouse click

10
2. Install batteries with the positive (+) & negative (-) in the correct direction
indicated by the battery compartment label.
3. Replace battery compartment cover. The red LED on the bottom of the mouse,
will indicate power to the mouse
ote: The O /OFF sliding-switch on the mouse bottom must be put on the “O ”
position.
Step 2. Connecting the Mouse to the available Bluetooth-enabled PC or Laptop
There requires a one-time connection between the mouse and the available Bluetooth-
enabled PC or Laptop.
Please follow the steps below to finish the connection:
1. Before you can install your Lynx Bluetooth mouse, please make sure you have
done the Bluetooth dongle installation procedure.
2. Press and release the “CO ECT” button on the bottom of the Bluetooth mouse.
The red light led under the wheel button will be turn on.
3. On your computer system, double click the Bluetooth icon, and select the
advanced configuration program.
4. Follow the indication of the advanced configuration program to setup the HID
Bluetooth mouse driver.
Your mouse now is ready to be used.
Connect Button
Link Indicator

11
ote: During normal operation, if you press the "connect" button by mistake, you
should re-connecting, follow the steps 1 to 4 again.
BATTERY LOW INDICATOR
When battery voltage level goes under the preset level, the LED on the mouse top cover
will blink frequency. Although the mouse can still work for a while, the user, at this time,
should have a new set of batteries ready for replacement as soon as possible.
Dpi description
Resolution 800dpi 1200dpi 1,600dpi
LED behavior LED will flash once
then go off
LED will flash 8
seconds, then go off
LED will light 8
secconds, then go off
ote: 1. Each dpi level setting needs to press the dpi select button more than 0.5 sec.
2. Each dpi level indicator shows 8 seconds, in the 8 seconds period, can’t
execute the next level dpi setting.
POWER ON/OFF MOUSE
Power off the mo se
For traveling user, this Lynx BT-Mouse provides one sliding-switch on the bottom of
mouse. User just pushes the sliding-switch to the “OFF” position to power-off this BT-
mouse.
Power on the mo se
When this BT-mouse is in sleep mode, to activate the mouse again, just need to move the
mouse. If this mouse is power-off, user needs to push the sliding-switch to the “O ”
position, and move this BT-mouse to wake up the mouse connection.

12
OPERATIONS ON POWER SAVING MODE
In order to conserve battery power, the mouse is designed to reduce power consumption
gradually from Standby 1, Standby 2 and Sleep mode, if it is not being used.
Mode Description
Standby-1 mode Stop moving to Standby1 interval 3 sec
Standby-2 mode Standby-1 to Standby-2 interval 3 sec
Sleep mode
Standby-2 to Sleep interval 8 min, for mouse without freeze mode).
In sleep mode, user has to move the mouse to wake up the mouse for
normal operation.
GENERAL SPECIFICATIONS
- 6 Buttons Bluetooth optical mouse.
- 800/1,200/1600 3 selectable dpi hardware resolution.
- Low power indicator.
- Power O /OFF switch.
- Ergonomic and enlarge buttons design for comfortable grip.
- 2 AAA batteries to operate the mouse.
- Dimension: 95.0*66.7*37.5 (L*W*H,mm)
- Weight: 59.4±5.0gm (without batteries)
- Class 1 LED Prod ct
COMPATIBILITY
- Bluetooth Version 2.1 protocol stack
- Bluetooth Human Interface Device profile
- Microsoft Windows 2000/XP/Vista, Mac 10.1 above
Other manuals for MOUSE LYNX
1
Table of contents
Languages:
Other Natec Mouse manuals

Natec
Natec Siskin User manual

Natec
Natec BLACKBIRD 2 User manual

Natec
Natec MAGPIE User manual

Natec
Natec SISKIN 2 User manual

Natec
Natec CRAKE User manual

Natec
Natec Genesis GX55 User manual

Natec
Natec TOUCAN User manual

Natec
Natec OSPREY User manual

Natec
Natec NMY-1688 User manual

Natec
Natec JAGUAR User manual

Natec
Natec GENESIS G33 User manual

Natec
Natec Genesis GX85 User manual

Natec
Natec Genesis GX69 User manual

Natec
Natec Robin User manual

Natec
Natec HARRIER 2 User manual

Natec
Natec Ruff User manual

Natec
Natec HAWK User manual

Natec
Natec Martin User manual

Natec
Natec WALLAROO User manual

Natec
Natec VIREO 2 User manual