Natural Light Gable Solar Fan User manual

Gable Solar Fan Installation Instructions
10821 North 23rd Avenue, Suite 1
Phoenix, AZ 85029
www.solaratticfan.com
800-363-9865
IMPORTANT: Please take the time to read through
the ENTIRE instructions prior to starting any work.
Precautions
1. Ensure normal safety precautions are taken when
using tools, ladder and walking on roofs.
2. Do not cut any structural members in the house.
3. Install only in dry weather.
Tools Required
Gable Fan Installation Kit:
A. Gable Fan
B. Solar Panel
C. (2) L-Brackets
D. Caulk
E. Power Cable Adapter
F. (14) Wood Screws
G. (4) Machine Screws
H. (4) Self-Tapping Screws
I. (4) Anchors (for tile roofs)
• Power Drill
• Phillips Screwdriver
• Caulking Gun
• Ladder
• Electrical Tape
•1
/4” Masonry Bit (for tile roofs)
Installation Pointers
When determining location of the solar panel, consider potential problems such as objects shading the unit during certain
times of the day (southern exposure is recommended). To ensure proper ventilation, install the Gable Solar Fan so that
it covers the entire gable opening.
Step 1 Choose location to install the gable fan. The fan must be installed
between studs in the gable area. For proper ventilation, the fan unit must
cover the entire gable opening. If the gable opening is larger than the fan
unit shroud, the excess opening must be blocked. DO NOT CUT ANY
WOOD FRAMING. From inside the attic, position the gable fan (with the
motor facing the attic) to the desired location and secure the shroud with the
provided wood screws (see Figure 1).
Step 2 Locate area to install the solar panel on the roof where it will gather
the most amount of sunlight (southern exposure is recommended). Attach
the L-brackets to the long sides of the solar panel with the self-tapping (H)
screws into the pre-drilled holes on the panel frame. Attach solar panel to
roof using the provided wood screws (see Figure 2). Caulk around the wood
screws to prevent leaks.
Step 3 Use one of the following two options for routing the power cable
from the fan to the solar panel:
OPTION 1: Route the power cable from the fan unit through the gable
vent and along the outside of the house up to the roof.
OPTION 2: Drill a small hole next to the solar panel on the roof. Route the
power cable from the fan unit through the attic and up through the hole.
Caulk around hole to prevent leaking.
Step 4 Connect the power cable from the fan unit to the power cable from
the solar panel. Connect the black wire to the black wire and the red wire
to the red wire (see Figure 3). If the power cables do not reach, use the
provided adapter cable. If wire connections are located outside of the attic
space, wrap the connections with electrical tape to prevent water infiltration.
Secure any loose wires using wire staples (not provided).
(view from inside attic) Figure 1
Figure 2
Figure 3
A.
B. C.
D. E.
F. G. H. I.
FF
H
G

Gable Solar Fa n
This Natural Light Gable Solar Fan has a 25 year warranty
on the housing, 15 year warranty on the solar panel
and a 5 year warranty on the motor.
IMPORTANT: PLEASE COMPLETE AND MAIL THE CARD BELOW AS SOON AS
YOUR SOLAR ATTIC FAN IS INSTALLED. This card will serve as proof of your purchase,
should you misplace your original invoice.
The manufacturer warrants this product to be free from defects in material
and manufacturer’s workmanship for a period of five years on the motor, 15 years on
the solar panel, and 25 years on the housing, from the date of installation. This warranty
is subject to proper installation of the unit in accordance with the manufacturer’s written
installation instructions. The manufacturer will not be liable for any special, incidental or
consequential damages in any way related to, or arising out of, defects in,
or damage to, the gable solar fan.
This warranty gives you specific legal rights, and you may have other rights which vary from
state to state concerning exclusion or limitation of incidental or consequential damages.
WARRANTY
REGISTRATION
Natural Light Gable Solar Fan Installer: ___________________________________________________________________
Date of Purchase: ______________________________________________________________________________________
Customer Name: ______________________________________________________________________________________
Address: ______________________________________________________________________________________________
City:_________________________________________________ State:_________________ Zip:______________________
Customer Survey
Are you satisfied with the performance? Y N
What made you choose our product?
_____________________________________________________________________________________________________
Were you satisfied with the installation job?
_____________________________________________________________________________________________________
Comments:
_____________________________________________________________________________________________________
Please fill out the form below and mail it to:
Natural Light Energy Systems • 10821 North 23rd Avenue, Suite 1 • Phoenix, AZ 85029