NatureWater 50801 User manual

Operation Manual
Naturewater 3 Stages Reverse Osmosis 50801
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

https://www.naturewater.eu Artikel 50801 Seite 2
08 2020-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously or
placing your order via the webshop.
E-mail: [e-mail]
Tel:[phone]
Fax: [phone]
To return orders for exchange, repair or for other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [e-mail]
Tel:[phone]
Fax: [phone]

https://www.naturewater.eu Artikel 50801 Seite 3
08 2020-1
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
A. short three way valve
B. ball valve
C. PP sediment filter cartridge with outer diameter 60mm for 5micron
D. Post in line carbon filter（T33A）
E. RO membrane housing
F. RO membrane
G. Flow limit
H. Ball valve (for back-flushing, not illustrated)
Installing:
Please open three housings and then put three kinds of filter cartridge, PP, T33A and RO membrane
CTO into housings, and then tight the three housings
All other areas will use P.E pipe to connect。
Please connect the short three way valve and ball valve to water tap.
Connection of the PE-line to the RO-Membrane:
The connections have three 3 seals:
BLUE (Sign: „To Faucet“): connection to water tap
BLACK (Sign: „To Drain“): connection to waste water
RED (Sign: „To Water Inlet“): coupling to water connection (inlet)
Back-flushing:
The pre-installed ball valve must be closed during normal filter operation. In order to rinse the
RO-membrane, the ball valve has to be opened so that the water pressure can rinse the mem-
brane.
Function of the filters:
Filter cartridge
function
lifespan
PP
Remove sand, salt, colloid and any other suspension whose
diameter is more than 5micron in water
3-6months
T33
To adsorb odour, chlorine and its outgrowth in raw water
6-12months
RO membrane
To remove harmful soluble solid, bacteria and virus and other
impurities in raw water
1-2months
During mounting turn off the water.
If the osmosis unit is not used, turn of osmosis unit from the water mains.