NatureWater NW-BRL03-LS3 User manual

Operation Manual
Naturewater 3-Stage Filter
51101–51106, 51116, 51118
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

https://www.naturewater.eu Item 51101–51106, 51116, 51118 Page 2
03 2022-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
Do you wish to pick goods up? Our pick-up address is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
Germany
To shorten the waiting time and allow for a rapid on-site transaction, we ask you to call us previously or
placing your order via the webshop.
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: [e-mail]
Tel: [phone]
Fax: [phone]

https://www.naturewater.eu Item 51101–51106, 51116, 51118 Page 3
03 2022-1
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Inlet
(½″, ¾″, 1″)
Inlet
(½″, ¾″, 1″)
1. The filter system is delivered with 5μ sediment filter inserts, which reliably remove sand, rust,
and algae as well as other floating particles from the water. – The second step of the filter,
consisting of activated carbon granules cartridges, cleans the drinking water from ozone, pesti-
cides, rust, calcium oxide particles, chlorine, and lowers the concentration of heavy metals such
as lead and copper. The cartridge is used additionally to the activated carbon block filter candle.
– The third filtering step, consisting of an activated carbon block filter cartridge, cleans the
drinking water from ozone, pesticides, rust, calcium oxide particles, and chlorine, and reduces
the concentration of heavy metals such as lead and copper.
2. The different connections for the inlet and outlet can be chosen by the customer.
3. Open the casing and remove the filter cartridge. Remove the wrapping on the inside of the
cartridge. Then place the filter cartridge back into the casing and close it again.
4. Check the connection between this product and everything connected to it.
5. Connect the feed to the tap and ensure that its positioning is secure.
6. Open the tap. The water will be redirected from the pipe through the filter system from where it
will flow out of the opening valve.
7. The used water filter inserts and cartridges need to be exchanged according to the water quality
in regular intervals. The sediment and activated carbon filters cannot be washed out and need
to be replaced approximately every 6 months.
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction
manual require the written permission of WilTec Wildanger Technik GmbH.