NBB Adult Picnic Table User manual

Adult Picnic Table
Assembly Guide
0800 1777 052
APT-07-150520-RF

Tools supplied
17mm Spanner
6mm Allen Key
x1
x1
Parts and Fittings
Table Top
Fittings
Two People required
for safe assembly
x24 x48
A-Frame Leg Components
3
x3
x1
x2
Bench Seat
x24

Step
1
Place table top on a soft, flat surface.
Do not over-tighten bolts during assembly as small
adjustments will help parts fit.
Step
2
4
Assemble the A frames by attaching the legs to the
cross beams with the nuts and bolts supplied, using
2 washers per bolt.

NOTE: Legs sit on
inside of beam
Ensure leg and
table brace are
in line vertically
Ensure leg and
table brace are
in line vertically
Do not over-tighten bolts during assembly as small
adjustments will help parts fit.
Step 3
4
With the table top in place attach the legs in the
orientation shown below, with the nuts and bolts
supplied, using 2 washers per bolt. Use both the
spanner and the allen key to secure the bolts.

NOTE: Only 1 hole used on seat brace
Step
4
Step
5
5
Flip table using two people.
Place seats on A-Frames and fasten with bolts
supplied.
NOTE: Seats are universal -
1 hole will be unused.

Notes:
6

Notes:
7

8
CONTACT DETAILS:
Email : [email protected]
Web : www.recycledfurniture.co.uk
Tel : [phone]
NBB Recycled Furniture,Unit 5, 145 Sterte Road,Poole, Dorset BH15 2AF
THANK YOU
FOR PURCHASING THIS PRODUCT
ECN 0004 (Rev A)
All Parts and Fixings checked by:
Print Name: Signature