nbf Signature Series User manual

ASSEMBLY INSTRUCTIONS
PARTS
Congratulations on the purchase of your new Signature Series chair!
INSTRUCTIONS
Remove all parts from carton and verify part quantities as indicated on parts list.
Insert the caster into the hole at the bottom of the ve prong base.
Insert the bottom end of the seat lift into the center hole of the base.
Place the chair body onto the small end of the seat lift.
Insert armrests into the holes located at both sides of the seat. Insert the width-adjustable
knobs into the holes from the underside of the seat. Adjust the width of the armrest to your
preference, and tighten securely.
Attention: MAKE SURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING CHAIR.
1
2
3
4
Warnings
1. This product should be used by only one person at a time.
2. Do not use this chair unless all bolts, screws and knobs are securely tightened.
3. Save Allen wrench. Check that all bolts, screws and knobs are tight every three months or as needed.
4. Dispose of packing material properly. Do not use the plastic cover as a head covering.
It may cause suffocation.
5. Do not use the chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use a soft cloth to clean the chair. Do not use water or chemicals on the aluminum parts.
ARRIS CHAIR
BASE
QTY: 1
CASTERS
QTY: 5
SEAT LIFT
QTY: 1
CHAIR BODY
QTY: 1
ARM RESTS
QTY: 2
WIDTH
ADJUSTABLE
KNOB QTY: 2
ALLEN WRENCH
SPARE PART
(SAVE FOR FUTURE
TIGHTENING)
MID-BACK VERSION
HIGH-BACK VERSION
34
12
CUSTOMER SERVICE HOTLINE
800-626-6060
WWW.NBF.COM

ERGONOMIC FEATURES
ARRIS CHAIR
CUSTOMER SERVICE HOTLINE
800-626-6060
The backrest height
can be manually
adjusted by pulling
up on the back of
the chair.
Manually pull up the
headrest to adjust it’s
height.
Push the button
located on the bottom
of the seat to slide
the seat forward and
backwards.
Rotate the knob
to adjust the
headrest angle.
The back of the
chair reclines with
pressure and retracts
automatically.
Turn the handle to
adjust the strength of
the back tilt tension.
Push the lever to
adjust the chair height.
The location, height,
and width of the
armrest can be
adjusted manually.
Turn the lever to
lock/unlock the tilt
motion.
Button
Handle
Lever
ADJUSTMENTS
Loosen
Tighten
Button
WWW.NBF.COM
Loosen
Tighten