nbf Signature Skoop Collaborative Lounge Chair Quick start guide

PARTS INSTRUCTIONS
PART DESCRIPTION QTY
1Base 1
21
31
4
Cylinder
1
Assembled Chair
INSTRUCTIONS
A. Remove all parts from the carton and separate them into part number groups as indicated in the parts list.
B.
C.
D.
Place the assembled chair on top of the cylinder (2) and press down until fully engaged.
Periodically (every 90 days) make sure that the screws are still fully tightened.
CUSTOMER SERVICE HOTLINE
800-626-6060
ATTENTION:
Make certain to fully tighten all screws
before using chair.
ASSEMBLY INSTRUCTIONS
Congratulations on the purchase of your new Signature Series chair!
SKOOP COLLABORATIVE LOUNGE CHAIR
WWW. NBF. COM
800-558-1010
Turn the base (1) (2) into the center hole on the base (1).
Hexagonal Wrench
WE SUGGEST TAPING THE WRENCH UNDER THE SEAT FOR FUTURE USE.

OPERATING FEATURES
WARNINGS
1. This product should be used by only one person at a time.
2. Do not use this chair unless all bolts, screws and knobs are
securely tightened.
3. Save the hexagonal wrench. Check that all bolts, screws and
knobs are tight every three months or as needed.
4. Dispose of packing material properly. Do not use the plastic
cover as a head covering. It may cause suffocation.
5. Do not use the chair as a stepladder.
ASSEMBLY INSTRUCTIONS
SKOOP COLLABORATIVE LOUNGE CHAIR
WWW. NBF. COM
800-558-1010
6. To clean the product, use only a clean cloth. The use of chemicals
or cleaning products may affect the color fastness.
7. Use this chair for its intended purpose only.
360 degree swivel with automatic return. When you leave the chair, it will
come back to the original position.