Thank you for purchasing NC-Link Access Point. This manual will instruct you
how to configure and the AP, enable you to use it in a perfect status.
Please check the Package before use it.
Package Contents
1. Manual Instruction
This manual is subject to tell users how to use this Wireless Access Point
properly. Contents include description of this platform’s properties, and how to
configure this platform. Pre-reading this manual before operation is highly
recommended.
1.1 Target Reader
This manual is for those familiar with basic networking knowledge and
terminology
2. Product Introduction
NC-AC44APP/NC-AC21AP are highly performance Wi-Fi Access Point, complied
with IEEE 802.11ac/n/g/b/a.
NC-AC44APP is 1200Mbps, 867Mbps @5.8GHz, 300Mbps @2.4GHz
NC-AC21AP is 750Mbps, 433Mbps @5.8GHz, 300Mbps @2.4GHz
2.1 Product Layout
2.1.1 Interface
DC Jack: It is used for 12V direct current power supply.
WAN/PoE: The WAN/PoE port is used to connect to the power and
Internet.
LAN: Then LAN port is used for bridging.
Reset: Press the Reset button about 15 seconds, then release to reset.
The default IP address is 192.168.188.253