NCR 7409-K314 Manual

7409‐K314
FixedAngleMount
ImagingScanner
KitInstructions
IssueA

Revision Record
Issue Date Remarks
A Sept 2012 First Issue

1
Introduction
ThiskitprovidesaFaceplateCableCoverwithanN5680ImagingScannerfortheNCR
SelfServ60(7409).Theassemblyinstallsonthefrontofthe7409‐K035FixedAngle
Mount.
Components
31470
Screw, 6-32 x 0.312, Ph, PH, Black
006-8616632
FixedAngle Mount Cable Cover
497-0476288
Screw, 6-32 x 0.312, Ph, PH, Black
006-8616632
Screw, 6-32 x 0.312, Ph, PH, Black
006-8616632
N5680 Imager
497-0476023
FixedAngle Mount Imaging Scanner Faceplate
497-0476287
USB Cable, Type Ato Micro B rightAngle, 12”
497-0475633

2
Installation Procedures
1. Removethescrews(2)inthesidesoftheFixedAngleMount.
2. RestthebottomofthedisplayontheDisplaySupport.
Note: PlacetheDisplaySupportbehindtheextensiononthenDisplayHinge
Bracket.
31462
Screw
(One each side)
31469
Display Support

3
3. RemovetheterminalCableCover(1captivescrew).
4. RemovetheBlankFaceplatefromtheFixedAngleMount(2screws).
31468
Cable Cover
31464
Blank Faceplate

4
5. InstalltheFixedAngleMountFaceplateonthefrontoftheFixedAngleMount
(2 screws).
6. InstalltheImagingScannerontheFixedAngleMountCableCover(3screws).
31466
FixedAngle Mount Faceplate
31465
FixedAngle Mount Cable Cover
Imaging Scanner

5
7. ConnecttheUSBCabletothescanner.
8. InstalltheFaceplateandScannerAssemblyontheterminal(3screws).
31471
31472
Faceplate and ScannerAssembly

6
9. ConnecttheUSBCabletotheterminalI/OPanel.
10. LowertheDisplaybacktotheoperatingpositionontheFixedAngleMountand
secureitwithscrews(2).
27661
RS232/B RS232/A A
B
Line Out 2 Line Out 1Mic Power
D V I - I
DC In LAN C
D
E
F
USB PortsTerminal Power
31462
Screw
(One each side)