Achieve consistent, long-distance signals. You can
now realize the advantages of long monitor cable
lengths without the difficulties and costs normally
associated with this type of configuration. In environ-
ments such as trading floors and call centers, longer
cables enable systems to be centrally located in
control rooms far away from users(up to 326 feet/
100 meters), allowing monitor upgrades, service and
repairs to be accomplished without interrupting the
work environment.
Historically, these longer monitor cable configurations
tended to have limitations, including weakened sig-
nals, which resulted in blurred images. Inconsistent
red, green and blue cable lengths were also common.
This produced uneven signals, thereby drastically
reducing display quality.
The MultiSync LCD 80 Series’ CableComp™, compat-
ible with all analog connections, solves these dilemmas
by using a digitized signal delay circuit to automati-
cally compensate for each red, green and blue cable’s
length and video signal delay, ensuring sharp image
reproduction. CableComp also boosts the video signal
to prevent blurred images without the need for
costly repeaters.
Wide compatibility for today and tomorrow.
Ambix+™ technology provides the widest range of
computer video compatibilities between analog and
digital systems by allowing the same monitor to work
seamlessly in either environment. The DVI-I connector
provides digital or analog input, the DVI-D connector
provides digital-only input, and a third input is pro-
vided with a traditional 15-pin VGA connector, which
allows for legacy analog-only connection. This triple-
interface architecture provides a number of single
and dual-input configurations.
Hassle-free display setup. With Advanced No Touch
Auto Adjust™, MultiSync LCD 80 Series monitors not
only provide for an optimal image upon initial power-
on but can also detect closed signal changes even if
they run under the same resolution and refresh rate,
as is the case with external signal switch boxes. This
results in a more stable image after switching. These
models also feature auto DVI cable detection, which,
upon power-up of your computer system, allows it to
identify which signal cable(analog or digital) is
attached to the monitor’s DVI-I connector. This
technology eliminates many manual setup steps and
assures that your system and monitor configuration
are achieving optimal performance.
Enhanced pro-level screen performance. With
XtraView+™ wide-angle viewing technology you can
enjoy flexible horizontal and vertical viewing angles
up to 178°(89° up, down, left and right) with reduced
color shift and less glare, reflection and distortion.
Less off-angle color shift results in less image degra-
dation and, in environments where data may be
viewed by multiple users, this enhanced feature
proves to be a winning solution. NEC’s Rapid
Response™ technology provides for uninterrupted
display of full-motion video with response times of
25ms or less. Rapid Response delivers streaming video
without noticeable ghosting or blurring, while
achieving as many as 62 frames per second(fps). This
remarkably quick motion makes these models better
than ever for animation, game development and video
applications such as presentations and streaming web
video. Rapid Motion™(featured on the MultiSync
LCD1980FXi and LCD1980SXi), a technology strictly for
viewing moving video, DVD movies or MPEG files,
bypasses frame memory altogether for smooth-
flowing video reproduction without ghosting or
digital artifacts.
Intelligent power management ensures a smart
investment. Using approximately 50% less power and
emitting less heat than comparable CRT monitors, the
MultiSync LCD 80 Series allows you to conserve energy
and lower your total cost of ownership. Many tech-
nologies contribute to these savings, including the
automatic power-off timer, which can be set from 1-24
hours via the on-screen display. If users forget to turn
off their monitors, this function will turn them off
automatically after a user-determined period of time,
thereby reducing electrical power costs. The high-
efficiency backlight, which provides the longest life-
times of any NEC LCD monitor family, reduces not only
the power consumption but also the heat generation
at the front of the screen.
Series Features and Benefits
Ultra-thin-frame design allows you to view more
of your ideas and less of the monitor bezel, while
freeing up more horizontal and vertical desktop
space for multiple-monitor applications
XtraView+ technology allows for the widest viewing
angles available(up to 178°) without off-angle
color shift
Rapid Response technology delivers virtually
uninterrupted, undistorted viewing of high-speed,
full-motion video
NaViSet software offers an expanded and intuitive
graphical interface, allowing you to more easily
adjust display settings via mouse and keyboard.
The Administrator version utilizes the monitor’s
advanced control and diagnostics capabilities to
provide IT professionals with remote access to
monitor settings over their existing network
GammaComp internal circuitry automatically
converts 8-bit data from the PC to 10-bit and back
to 8-bit, producing smooth, accurate color tones
(MultiSync LCD1980FXi, LCD1980SXi and LCD2180UX)
TileMatrix allows you to build video walls of various
configurations(up to 5 x 5) through the Advanced OSM
(MultiSync LCD1980FXi, LCD1980SXi and LCD2180UX)
TileComp compensates for tiled bezel width to
optimally display still images(MultiSync LCD1980FXi
and LCD1980SXi)
AmbiBrightTM automatically adjusts the backlight
depending on ambient lighting brightness
(MultiSync LCD1980FXi)
CableComp automatic long cable compensation
prevents image quality degradation caused by long
cable lengths
Automatic black level adjustment regulates
grayscale images for optimal picture quality
Power-off timer automatically turns your monitor’s
power off after a user-determined amount of time
AutoBright function aligns the monitor’s brightness
level with the application in use for optimal viewing
Auto DVI cable detection eliminates manual setup
steps and ensures optimal performance between
your system and monitor
Cable management helps prevent unattractive,
space-consuming wire clutters
Advanced No Touch Auto Adjust provides optimal
image settings upon initial power-on and closed
signal changes(includes a user-selectable mode
in the Advanced OSM)
Pivot capability and height-adjustable stand add
flexibility to your viewing preferences
Touch or protective glass integration-enabling
design increases application options
The MultiSync LCD 80 Series’ ultra-thin frame design, which at less
than 13mm, is thinner than the width of a dime, saves almost 70%
more horizontal space than its predecessors, providing a more
uniform and virtual viewing experience. The LCD1980FXi’s bezel
design saves even more space with a width of 12mm.
