NEC Versa LitePad User manual

Model VERSA Litepad
User's Manual

Model VERSA LitePad User's Manual
Page II
Specifications and information found in this manual are subject to change
without notice. Any changes therefore will be incorporated in future
editions. The manufacturer assumes no responsibility for errors or
omissions in this document.
Windows® XP is the trademark of Microsoft Corporation.
Pentium® and Celeron® are the trademarks of Intel Corporation.
Other trademarks are properties to their respective owners.
NOTICE
TRADEMARKS

Model VERSA LitePad User's Manual
Page III
The following standards are adopted throughout this manual:
Boldface type is also used to highlight important information in this
document.
The messages which appear on the Computer screen will be boxed
when they are referenced.
Whenever extra caution is called for, the information will be boxed in a
dark frame preceded by "Note:" or "Warning:"
Usually after performing a step-by-step instruction, you will be asked to:
Press the Esc key
Which means you should press the key located at the upper left-
hand corner of the keyboard.
Standards

Model VERSA LitePad User's Manual
Page IV
This page is left blank intentionally.

Model VERSA LitePad User's Manual Contents
Page V
CHAPTER 1 INTRODUCTION ........................................................1-1
1.1 STANDARD FEATURES........................................................................................1-1
CHAPTER 2 BEFORE YOU BEGIN ................................................2-1
2.1 CHECKING WHAT YOU RECEIVED......................................................................2-1
2.2 PANORAMIC VIEW OF YOUR SYSTEM ...............................................................2-2
2.3 FRONT VIEW OF YOUR SYSTEM .......................................................................2-3
2.4 REAR VIEW OF YOUR SYSTEM .........................................................................2-4
2.5 THE STEREO/MONO JETS ..................................................................................2-5
2.6 THE NINE BUTTONS..........................................................................................2-6
2.7 THE FOUR LEDS...............................................................................................2-7
CHAPTER 3 AGENCY REGULATORY NOTICES ...................... 3-1
3.1 SAFETY INSTRUCTIONS .....................................................................................3-1
3.2 AGENCY NOTICE ..............................................................................................3-6
CONTENTS

Contents Model VERSA LitePad User's Manual
Page VI
This page is left blank intentionally.

Model VERSA LitePad User's Manual Introduction
Page 1-1
Chapter 1 Introduction
1.1 Standard Features
SYSTEM
■Intel Mobile Tualatin Pentium III 933MHz ULV uFCBGA with L1 cache 128KB /
L2 cache 512KB.
■Core Logic: Intel NorthBridge ALi Napa2-T and Intel SouthBridge ALi 1535+.
■One S.O DIMM SDRAM memory socket to support memory from 256MB to
512MB memory.
■512KB Flash ROM contains BIOS and is easily user upgradeable.
DISPLAY
■10.4” XGA TFT LCD panel.
STORAGE DEVICE
■Industry standard 20GB 1.8” 5mm HDD supported with Ultra DMA 33/66/100.
■External USB FDD drive.
■External USB CD-RW drive, or
External USB CD-ROM drive.
Keyboard
■External USB keyboard (supported by MS-DOS).

Introduction Model VERSA LitePad User's Manual
Page 1-2
CONNECTIVITY and EXPANSION
■One VGA connector.
■Three type II USB ports.
■One microphone-in connector.
■One headphone-out connector.
■One RJ45 connector.
■One DC-Out jack for USB CD-ROM/CD-RW drive connection.
■One DC-in jack.
■One type II CF card slot.
POWER
One battery slot to support Lithium Ion (Li-Ion) battery pack.
Offline battery charging time is around 4 hours for Li-Ion battery pack.
Full range 100 to 240V auto-switch AC adapter; 100Vac input voltage on load
power consumption < or = 1W.
PHYSICAL
Weight : 0.9kg.
Height/Width/Depth : 224mm/297mm/15mm.
Note: Weight and height might change due to different configurations and models.

Model VERSA LitePad User's Manual Introduction
Page 1-3
ENVIRONMENT
Operating Temperature : 5ºC to 25ºC.
Non-Operating Temperature : -20ºC to 60ºC.
Humidity : 10% to 90% non-condensing.
Shock : 5G operating, 60G non-operating.
Vibration : 3-200Hz @ 1.0G operating.
: 3-200Hz @ 1.5G non-operating.
Warning: Don't expose your computer to excessive heat or coldness (frost).
Don't drop, spill fluids or open the exterior of the case. This can
damage the computer and void the warranty.
OPERATING SYSTEM
Microsoft Windows XP® Pro with tablet.
OPTION
■Standard S.O. DIMM SDRAM 256MB memory module for expansion from
256MB to 512MB.
■Optional external USB FDD drive.
■Optional external USB CD-RW drive.
■Optional external USB CD-ROM drive.

Introduction Model VERSA LitePad User's Manual
Page 1-4
This page is left blank intentionally.

Model VERSA LitePad User's Manual Before You Begin
Page 2-1
Chapter 2 Before You Begin
Please read this chapter before you start using your computer.
2.1 Checking What You Received
Your computer package should contain the following items:
Note: You should keep the original factory carton and packing materials in case
you need to ship the unit back for servicing.
a) a) The Computer.
b) Accessories:
Headset
Stand
Case

Before You Begin Model VERSA LitePad User's Manual
Page 2-2
2.2 Panoramic View of Your System
fff f
Panoramic View
Wireless
LAN Antenna
Kensington
Lock
CRT
LAN
DC In
The Four
Buttons
LCD Protected
Cove
r
Internal
Microphone
Logo Badge
Battery Pack
The Four LEDs
The Five Buttons

Model VERSA LitePad User's Manual Before You Begin
Page 2-3
2.3 Front View Of Your System
Front View
Wireless
LAN Antenna
Kensington
Lock
CRT
LAN
DC-In
The Four
Buttons
LCD Protect
Cove
r
Internal
Micro
p
hone
Battery Pack
Logo Badge
The Four LEDs
The Five Buttons

Before You Begin Model VERSA LitePad User's Manual
Page 2-4
2.4 Rear View Of Your System
Rear View
Pen
CF Slot
DC-Out for
USB Drive
Three
USB
Ports
Microphone
Headphone
The HDD
S.O.DIMM
Slot
Speaker
Battery Lock
Ventilation Holes
Battery Pack

Model VERSA LitePad User's Manual Before You Begin
Page 2-5
2.5 The Stereo/Mono Jets
Two Types of Audio Jet
Stereo Connector: Your
Line-In jet should have this
type of connector as
shown here.
Mono Connector: Your
Microphone jet should
have a connector as
shown here.

Before You Begin Model VERSA LitePad User's Manual
Page 2-6
2.6 The Nine Buttons
The Power Button
The Wireless Button
The Security Button
The Function Button
Down The Down Button
The Enter Button
Up The UP Button
The Escape Button
The Change Screen Orientation Button
Note: The nine buttons are located between the bottom right panel and side panel
of the system unit.

Model VERSA LitePad User's Manual Before You Begin
Page 2-7
2.7 The Four LEDs
The Power Status LEDs
The Battery Charge LEDs
The HDD LEDs
The Wireless LEDs
Note: The four LEDs are located between the bottom right panel and side panel of
the system unit.

Before You Begin Model VERSA LitePad User's Manual
Page 2-8
This page is left blank intentionally.

Model VERSA LITEPAD User’s Manual Agency Regulatory Notices
Page 3-1
Chapter 3 Agency Regulatory Notices
3.1 Safety Instructions
CAUTION: Please read these safety instructions carefully.
CAUTION: Please keep this User's Manual for future reference.
CAUTION: Please disconnect this equipment from AC outlet before
cleaning. DO NOT use liquid or sprayed detergent for cleaning. Use a clean
moistened cloth.
CAUTION: The wall socket used should be positioned near the
equipment and should be easily accessible.
CAUTION: Please keep this equipment free from humidity.
CAUTION: Place the equipment on a reliable surface at all times. A drop
or fall can cause severe damage.

Agency Regulatory Notices Model VERSA Litepad User's Manual
Page 3-2
WARNING: The openings on the enclosure are for air ventilation and
are meant to protect the equipment from overheating. DO NOT COVER
THE VENTILATION OPENINGS.
CAUTION: Verify the voltage of the power source before connecting the
unit to any power outlet.
WARNING: DO NOT step on or place anything over the power cord.
CAUTION: All cautions and warnings on the equipment should be
noted.
WARNING: If the equipment is not used for a long period of time,
disconnect the equipment from the power source to avoid damage from
power spikes.
WARNING: NEVER pour any liquid into any openings; a fire or
electrical shock is possible.
WARNING: for safety reasons; other than pre-designated ports and
doors, only qualified service personnel should open the equipment.