neighbor Haven 5-Piece Symmetrical Sectional Teak Arm User manual

Haven 5-Piece Symmetrical
Sectional Teak Arm
Assembly Guide

Components Assembly Instructions Contact02
Left Module - Teak Arm Frame (1)
Right Module - Teak Arm Frame (1)
Armless Module Frame (2)
Corner Module Frame (1)
Cushions - Armless/Teak Arm (4)
Cushions - Corner Module (1)
Frame Boxes
Cushion Boxes

Components Assembly Instructions Contact03
Parts
4X Module Bases
Left Module - Teak Arm Frame Box
Right Module - Teak Arm Frame Box
Armless Module Frame Box
1X Right Teak Arm
Right Module - Teak Arm Frame Box
1X Left Teak Arm
Left Module - Teak Arm Frame Box
1X Corner Module Base
Corner Module Frame Box
4X Module Roped Back
Left Module - Teak Arm Frame Box
Right Module - Teak Arm Frame Box
Armless Module Frame Box
4X Module Back Support
Left Module - Teak Arm Frame Box
Right Module - Teak Arm Frame Box
Armless Module Frame Box
1X Corner Module Back Support
Corner Module Frame Box
2X Short Leg
Right Module - Teak Arm Frame Box
Armless Module Frame Box
4X Long Leg
Right Module - Teak Arm Frame Box
Armless Module Frame Box
2X Corner Module Roped Back
Corner Module Frame Box
1X Short Corner Leg
Corner Module Frame Box
1X Long Corner Leg
Corner Module Frame Box

Components Assembly Instructions Contact04
Cushions Hardware
4X Module Base Cushion
Armless/Teak Arm Cushion Box
4X Module Back Cushion
Armless/Teak Arm Cushion Box
50X 30mm Hex Bolt
All Frame Boxes
4X 40mm Hex Bolt
Left Module - Teak Arm Frame Box
Right Module - Teak Arm Frame Box
4X 60mm Hex Bolt
Corner Module Frame Box
Allen Wrench
All Frame Boxes
1X Long Corner Module Back Cushion
Corner Module Cushion Box
1X Small Corner Module Back Cushion
Corner Module Cushion Box
1X Corner Module Base Cushion
Corner Module Cushion Box
To o l s

Components Assembly Instructions Contact05
Product Care
Caring for teak
Unfinished teak will gradually change color
from honey gold to a silver-gray patina. We
encourage allowing the teak to turn color
naturally and cleaning it annually or bi-annually.
As for cleaning, we recommend Golden Teak
Cleaner, which is specifically designed to kill
mold and mildew spores inside teak.
Avoid prolonging mildew growth. If left in
the shade for extended periods, this can be
common. If you live in a particularly humid
or rainy climate, keep a closer eye on mildew
growth and clean as needed.
Covering your furniture when not in use will
greatly prolong the lifespan of the wood.
Caring for Sunbrella
Brush off dirt before it becomes embedded in
the fabric and wipe up spills as soon as they
happen. Rinse thoroughly and air dry. Avoid
scrubbing, stiff bristle brushes, or any other
abrasive cleaning method.
Protect the area around your furniture when
using bleach or other chemical solvents that
may discolor non-Sunbrella fabrics.
If fabric is wrinkled, use an iron on the synthetic
setting. As iron temperatures may vary, test
a small area first before ironing the entire piece.
Do not use a steamer or an iron set to the
steam setting.
Fabric stain removal
• Blot (don’t rub) liquid spills with a clean, dry
cloth. For oil-based spills, apply an absorbent
such as corn starch then remove with a
straight edge.
• Spray on a mild cleaning solution of soap
(such as Woolite®or Dawn®) and water and
lightly agitate with a sponge or gentle brush.
• Rinse the fabric thoroughly to remove all
soap residue.
• Air dry.
• As needed, unzip and machine-wash covers.
Assembly Tips
Use caution when lifting
Two-person lift is recommended. The boxes
and product are both large and heavy.
Lay everything out before you begin
Getting familiar with all the components before
assembly will make for a faster and easier
assembly process.
Assemble on a soft surface
We recommend assembling your furniture on a
soft surface such as a rug or a towel. The wood
frame can scratch against harsh textures like
brick or concrete.
Loose first, then tight
Partly tighten the hex bolts while assembly. After
the modules are fully assembled, tighten the
bolts firmly. Keep in mind humidity levels can
slightly affect how the pieces fit together.

06 Components Assembly Instructions Contact Armless/Corner
Armless/
Corner

07 Components Assembly Instructions Contact Armless/Corner
Connect legs to
corner base
Gently connect the Long Corner Leg,
two Long Legs, and the Short Corner Leg
to the Corner Module Base.
1
Long Corner Leg only
has two drill holes

08 Components Assembly Instructions Contact Armless/Corner
Fasten legs to
corner base
Using the Allen Wrench provided, fasten the Corner
Leg with two 60mm Hex Bolts. Then, secure both Long
Legs with two 30mm Hex Bolts per leg and the Short
Corner Leg with four 30mm Hex bolts, leaving two
threaded holes on each leg exposed as demonstrated.
2
4X 30mm Hex Bolt
4X 30mm Hex Bolt
2X 60mm Hex Bolt

09 Components Assembly Instructions Contact Armless/Corner
Connect legs to
left side of base
Gently connect the Long and Short Legs to the
left side of the Module Base, verifying that the
backrest slots are aligned with the Long Leg.
3
Backrest slots should
align with the Long
Leg, as shown

10 Components Assembly Instructions Contact Armless/Corner
Fasten legs to base
With the Allen Wrench provided, fasten the
Short Leg to the Module Base with two 30mm
Hex Bolts. Repeat with Long Leg. Be sure to
leave two threaded holes on each leg exposed
as demonstrated.
4
2X 30mm Hex Bolt
2X 30mm Hex Bolt

11 Components Assembly Instructions Contact Armless/Corner
Connect bases
Gently slide Module Base into the slotted
sections on the assembled corner component’s
Long and Short Legs. Slide base until its
pre-drilled holes align with the threaded holes
on the legs.
5

12 Components Assembly Instructions Contact Armless/Corner
Fasten bases
After holes on the bases are aligned with the
corresponding threaded holes on each leg,
use the Allen Wrench provided to fasten them
together with two 30mm Hex Bolts per side.
6
2X 30mm Hex Bolt
2X 30mm Hex Bolt

13 Components Assembly Instructions Contact Armless/Corner
Secure roped
backs to bases
Insert the Module Roped Back into the slots
of the Module Base. Then, insert the Corner
Module Roped Backs into the slots of the
Corner Module Base.
7
Drain holes face down

14 Components Assembly Instructions Contact Armless/Corner
Attach back supports
to roped backs
Lower the Module Back Support onto the Module
Roped back and the Corner Module Back Support
onto the Corner Module Roped Backs. Fit the tabs into
their corresponding slots, then insert.
8

15 Components Assembly Instructions Contact Armless/Corner
Fasten back
supports
Fasten the Corner Module Back Support to the
Long Corner Leg with two 60mm Hex Bolts.
Then, fasten the back supports to the three
remaining Long Legs with eight 30mm Hex Bolts.
9
4X 30mm Hex Bolt
4X 30mm Hex Bolt
2X 60mm Hex Bolt

16 Components Assembly Instructions Contact Armless/Right Arm
Armless/
Right Arm

17 Components Assembly Instructions Contact Armless/Right Arm
Connect base
to right arm
Place the Right Teak Arm on a soft surface
with the armrest facing down. Gently insert the
Module Base into the arm’s inner slots.
1
Backrest slots should
align with the back of
the armrest, as shown

18 Components Assembly Instructions Contact Armless/Right Arm
Fasten arm
to base
Using the Allen Wrench provided, fasten the
Module Base to the Right Teak Arm with two
30mm Hex Bolts per side.
2
4X 30mm Hex Bolt

19 Components Assembly Instructions Contact Armless/Right Arm
Fasten short leg
to base
Using the Allen Wrench provided, fasten the
Short Leg to the front left side of the Module
Base with two 30mm Hex Bolts. Be sure to leave
two threaded holes exposed as demonstrated.
3
2X 30mm Hex Bolt

20 Components Assembly Instructions Contact Armless/Right Arm
Fasten long leg
to base
Stand the assembled components upright.
With the Allen Wrench provided, fasten the
Long Leg to the Module Base with two 30mm
Hex Bolts. Be sure to leave two threaded holes
exposed as demonstrated.
4
2X 30mm Hex Bolt