neighbor Haven User manual

Haven
In-line Table
Assembly Guide

Components Assembly Instructions Contact02
Parts
In-line Table Box
Hardware
In-line Table Box
1X In-line Table Top
1X Allen Wrench
2X Bracket
4X 30mm Hex Bolts
4X 25mm Hex Bolts
4X 45mm Hex Bolts

Components Assembly Instructions Contact03
Product Care
Caring for teak
Unfinished teak will gradually change color from honey gold
to a silver-gray patina. We encourage allowing the teak to
turn color naturally and cleaning it annually or bi-annually.
As for cleaning, we recommend Golden Teak Cleaner, which
is specifically designed to kill mold and mildew spores
inside teak.
Avoid prolonging mildew growth. If left in the shade for
extended periods, this can be common. If you live in a
particularly humid or rainy climate, keep a closer eye on
mildew growth and clean as needed.
Covering your furniture when not in use will greatly prolong
the lifespan of the wood.
Assembly Tips
Use caution when lifting
Two-person lift is recommended. The boxes and product are
both large and heavy.
Lay everything out before you begin
Getting familiar with all the components before assembly will
make for a faster and easier assembly process.
Assemble on a soft surface
We recommend assembling your furniture on a soft surface
such as a rug or a towel. The wood frame can scratch against
harsh textures like brick or concrete.
Loose first, then tight
Partly tighten the hex bolts while assembly. After the modules
are fully assembled, tighten the bolts firmly. Keep in mind
humidity levels can slightly affect how the pieces fit together.

04 Components Assembly Instructions Contact
Change Long Leg position
Move the Long Leg on adjacent module(s) over one bolt
hole so leg is flush with Back Support and Seat Base. Leave
the Seat Base(s) unfastened to the Long Leg. All other
components can be fastened with 30mm Hex Bolts.
Leave base unfastened
to Long Leg for now
2X 30mm Hex Bolt
2X 30mm Hex Bolt
Align so Long
Leg is flush

05 Components Assembly Instructions Contact
Attach brackets
to table top
Next, insert the brackets into the holes of
the In-line Table Top and secure with four
25mm Hex Bolts.
1
4X 25mm Hex Bolt

06 Components Assembly Instructions Contact
Align table top
with modules
Gently align the In-line Table Top with the
threaded holes on the Short Legs on either side
and align the bracket holes with the threaded
holes on the back Long Legs.
2

07 Components Assembly Instructions Contact
Fasten table top
to modules
Using the Allen Wrench provided, fasten the
In-line Table Top to the modules on either side
with four 30mm Hex Bolts on Short Legs and
four 45mm Hex Bolts on Long Legs.
3
4X 45mm Hex Bolt
4X 30mm Hex Bolt

08 Components Assembly Instructions Contact
Add cushions
With the zipper seam facing backward, add the
base cushions to adjacent modules and tie down.
Finally, add the back cushion. Relax! Your table is
ready to enjoy.
4

Components Assembly Instructions Contact09
Have questions, comments, or feedback?
We love hearing from customers.
[e-mail]
hineighbor.com
Contact