neighbor The Loveseat User manual

01
The
Loveseat
Assembly Guide
BOXES NEEDED:
(1)
(1)
(1)
(1)
Left Arm Module Cushions
Right Arm Module Cushions
Left Arm Module Frame
Right Arm Module Frame

02 Components Assembly Instructions Contact
Parts
1X Left Arm
Left Arm Module Frame Box
2X Large Base
Left Arm Module Box, Right Arm Module Frame Box
2X Large Roped Back
Left Arm Module Frame Box, Right Arm Module Frame Box
1X Right Arm Module Back Support
Right Arm Module Frame Box
1X Left Arm Module Back Support
Left Arm Module Frame Box
1X Right Arm
Right Arm Module Frame Box
1X Small Leg
Right Arm Module Frame Box
1X Large Leg
Right Arm Module Box

03 Components Assembly Instructions Contact
Cushions
The Chair Cushions Box
Hardware
Left Arm Module Box, Right Arm Module Frame Box
Tools
Left Arm Module Box, Right Arm Module Frame Box
2X Base Cushion
20X Hex bolt 8X Screw
1X Allen Wrench Phillips Head Screwdriver
* Not included
2X Arm Cushion
2X Back Cushion

04 Components Assembly Instructions Contact
Assembly Tips
Exercise caution while lifting
Two-person lift is recommended. Both the
boxes and the product itself are large and heavy
and awkward to lift alone.
Lay everything out before you begin
Spreading out all of the components prior to
assembling them will help you find the parts
you are looking for and will make for a faster
and easier assembly process!
Assemble on a soft surface
We recommend assembling your furniture on a
soft surface such as a rug(s) or a towel(s). The wood
frame can scratch easily if accidentally rubbed
against harsh textures like brick or concrete.
Loose first, then tight
Do not fully tighten hex bolts when assembling.
Insert them loosely first. After the modules are
fully assembled, then tighten the bolts firmly.
Differing humidity levels can slightly affect how
the pieces fit together and this strategy should
alleviate that.
Product Care
Caring for teak
Unfinished teak will gradually change color
from a honey gold to a silver-grey patina.
We encourage allowing the teak to turn color
naturally and cleaning it annually or bi-annually.
As for cleaning, we recommend Golden Teak
Cleaner, which is specifically designed to kill
mould and mildew spores inside teak.
Avoid prolonging mildew growth. If left in the
shade for extended periods of time, this can be
common.
Covering your furniture for extended periods of
time, especially if enduring consistent inclement
weather will greatly prolong the lifespan of the
wood.
Caring for cushion cover fabric
One of the best ways to keep your Sunbrella
fabric looking good is to brush off dirt before
it becomes embedded in the fabrics and wipe
up spills or clean soon after a stain occurs. The
quicker you clean spills and stains, the easier
they can be to remove.
When removing stains, typically these are the
steps you should try:
• Blot (don’t rub) liquid spills with a clean, dry
cloth. For oil-based spills, apply an absorbent
such as corn starch, then remove with a
straight edge.
• Spray on a mild cleaning solution of soap
(such as Woolite® or Dawn®) and water.
• Rinse the fabric thoroughly to remove all
soap residue.
• Air dry.
Avoid scrubbing, hard bristle brushes or any
other abrasive cleaning method.
Sunbrella should only be allowed to air dry.
Protect the area around your Sunbrella fabric
when using bleach or other chemical solvents
that may discolor non-Sunbrella fabrics. Always
rinse Sunbrella thoroughly.
Bleach can have harmful effects on the natural
environment around you. Please follow all safety
and environmental precautions according to the
bleach label.
If fabric has some wrinkling, use an iron on the
synthetic setting. As iron temperatures may
vary, first test a small inconspicuous area before
ironing the entire piece.
DO NOT use a steamer or an iron set to the
steam setting.

05 Components Assembly Instructions Contact
Connect large
bases to arms
Place both the left and right arm components on
a soft surface, verifying that the two screw holes
are facing upward. Gently insert the long bases
into each arm’s inner slots.
1

06 Components Assembly Instructions Contact
4x
Fasten arms to
bases
Using the Allen wrench provided, fasten the large
bases to both the left and right arm components
with two hex bolts.
2

07 Components Assembly Instructions Contact
Fasten small leg to
large bases
Using the Allen wrench, fasten the small leg to
front of the Right Arm Module’s base with two
hex bolts. Be sure to leave two threaded holes
on the small leg exposed as demonstrated.
3

08 Components Assembly Instructions Contact
Fasten large leg to
large bases
Stand the Right Arm Module base upright on
its legs. Then with the Allen wrench, fasten the
large leg to the large base with two hex bolts. Be
sure to leave two threaded holes on the large leg
exposed as demonstrated.
4

09 Components Assembly Instructions Contact
Connect large and
small bases
Gently slide Left Arm Module’s base into the
slotted sections on the Right Arm Module’s large
and small legs. Slide base until its pre-drilled
holes align with the threaded holes on the legs.
5

10 Components Assembly Instructions Contact
Fasten large and
small bases
After holes on the bases are aligned with the
corresponding threaded holes on each leg, use
the Allen wrench to fasten them together with
two hex bolts per side.
6

11 Components Assembly Instructions Contact
Drain hole faces down
Secure roped backs
to large bases
Insert the lower brackets of the corresponding roped
back components into the slots of each base.
72x

12 Components Assembly Instructions Contact
2x
Attach back
supports to roped
backs
Lower each back support onto the roped
backs. Align slots underneath each back
support with the corresponding roped back’s
top bracket. Then insert bracket into the slot.
8

13 Components Assembly Instructions Contact
Fasten back
support to arms
and large legs
With your Allen wrench, gently fasten back
support components onto large leg with
four hex bolts. Aligning the pre-drilled
holes on the arm components with the
holes on the L-bracket. Then, with a Phillips
Head screwdriver, gently secure with four
screws. Repeat this for opposite arm.
9
2x

14 Components Assembly Instructions Contact
2x
Add cushions
First with zipper seams facing backward, add arm
cushions to each side. Thread the cushion laces
around the roped back posts and tie them down.
Then add both base cushions. Finally, add the back
cushions. Relax! You’re ready to enjoy your loveseat.
10

15 Components Assembly Instructions Contact
Have a question, comment, feedback?
We love hearing from customers.
[e-mail]
hineighbor.com
Contact