Neo Chair 801 User manual

ASSEMBLY
INSTRUCTION
BACK X1 SEAT X1 ARMREST X2 CONTROL
MECHANISM X1
WHEEL X5 BASE X1 GAS LIFT
CYLINDER X1
X4
A
X2
B
X4
C
X8
D
(SEAT + ARMREST)
(BACK + ARMREST)
(LOCKING)
(WASHER)
※Please make sure all the parts are included.
Missing parts? [email protected]
ALLEN KEY X1
Instructions
User Manual
Cautions
Contents
Read the instructions carefully. Please follow the assembly steps.
[e-mail]
www.neochair.com
801 Instructions
1.2.
STEP 1 Bottom
STEP 2 Top
If there are any problems, do not hesitate to e-mail us. [e-mail]
BBOLTS
ABOLTS
Please use the allen key included
instead of an electric drill.
※NOTICE
Under-
tighten
D
Use the box for
an easier assembly.
TIPS!
WASHER
Use the base as support and press
firmly from above with the wheel.
Make sure to put the wheels in the base before the gas lift cylinder.
1 .
2 .

Cautions
To deodorize your new chair
leave the chair in a shady
outside for 1-2 days.
For longer use
Re-tighten bolts every 6 months by using
the enclosed allen-key.
*Using an electric drill can damage the chair.
Please re-tighten bolts manually.
Use this product only for
seating one person at a time
Regularly check all bolts,
screws, and knobs are tight
Be careful, some of the part
are heavy and has sharped edge
Failure to follow these warnings
may cause serious injury
DO NOT use the chair
unless all bolts, screws
and knobs are tight
DO NOT use the chair if
only components are
missing or damaged
DO NOT stand on the chair
use as a step stool or ladder
Our goal is to create a perfect customer experience.
Let us know if you have any feedback.
Your comment motivates us to become a better team.
Enjoy your new favorite chair
[email protected]
www.neochair.com
@NEOCHAIR
neochair_office
If there are any problems, do not hesitate to e-mail us. [e-mail]
Check Height
Tilt Lock
User Manual
3.4.
1
2
3
4
CBOLTS
Tighten bolts in this order and pattern for improved strength
Right hand
FRONT