Neo Chair CNTT User manual

CNTT
ASSEMBLY
INSTRUCTION
※Please Make sure all parts are included.
If not, email us [email protected]
X3
BACK X1 SEAT X1 ARMREST X2 CONTROL
MECHANISM X1
WHEEL X5 CENTRAL BASE X1 BASE X5 GAS LIFT
CYLINDER X1
A
X10
B
X10
C
X1
D
Instructions
User Manual
Cautions
Contents
Read the instructions carefully. Please follow the assembly steps.
[email protected]
https://www.neochair.net
Instructions
1.2.
3.4.
1.2.
STEP 1 Bottom
STEP 2 Top
CBOLTS
1
2
3
4
Order of bolts for better durability.
Use packaging box
for easier assembly.
TIPS!
If there is any problem, do not hesitate to contact us with e-mail below. [email protected]
BBOLTS
BBOLTS
X3
Under-tighten each bolt
make sure bolt holes aligned and tighten!
※NOTICE
FRONT

3.
Check
Tilt Lock
User Manual
4.
Right hand
ABOLTS
Height
*Use power drill
for tighter assembly
Cautions
To deodorize a leather,
leave the chair in a shady
outside for 1-2 days.
For longer use
re-tighten bolts every 6 months.
Use this product only for
seating one person at a time
Regularly check all bolts,
screws, and knobs are tight
Be careful, some of the part
are heavy and has sharped edge
Failure to follow these warnings
may cause serious injury
DO NOT use the chair
unless all bolts, screws
and knobs are tight
DO NOT use the chair if
only components are
missing or damaged
DO NOT stand on the chair
use as a step stool or ladder
If there is any problem, do not hesitate to contact us with e-mail below.
Neo Chair is a professional furniture manufacturer
and supplier always considering the life of our customers.
Thank you for your purchase!
[email protected]
[email protected]
https://www.neochair.net