Neo Chair H-PAC User manual

ARMREST
X8
BACK X1 SEAT X1 ARMREST X2 CONTROL
MECHANISM X1
WHEEL X5 BASE LEG X5
GAS LIFT
CYLINDER X1
A
TILT
X4
B
TILT WASHER
X4
C
BASE
X10
BOLT CAP
X8
D
ALLEN KEY
X1
E
F
※Please make sure all the parts are included.
Missing parts? [email protected]
[e-mail]
www.neochair.com
Read the instructions carefully. Please follow the assembly steps.
Cautions
To deodorize the leather
leave the chair in a shady
outside for 1-2 days.
Use this product only for
seating one person at a time
Regularly check all bolts,
screws, and knobs are tight
Be careful, some of the part
are heavy and has sharped edge
Failure to follow these warnings
may cause serious injury
DO NOT use the chair
unless all bolts, screws
and knobs are tight
DO NOT use the chair if
only components are
missing or damaged
DO NOT stand on the chair
use as a step stool or ladder
ASSEMBLY
INSTRUCTION
Instructions
User Manual
Cautions
Contents
H-PAC
For longer use
Re-tighten bolts every 6 months by using
the enclosed allen-key.
*Using an electric drill can damage the chair.
Please re-tighten bolts manually.
If there are any problems, do not hesitate to e-mail us. [e-mail]
Our goal is to create a perfect customer experience.
Let us know if you have any feedback.
Your comment motivates us to become a better team.
Enjoy your new favorite chair
[email protected]
www.neochair.com
@NEOCHAIR
neochair_office
CENTRAL BASE X1

Instructions
STEP 1. 
Instructions
STEP 2. 
2
5
6
7 8
3
4
1
Secure with bolts.
Make sure to fully tighten all 10 bolts.
Insert each wheel into the base leg while
the base is still upside down. Turn the base over.
BASE BOLT
D
Insert the base legs into the central base
so that the bolt holes are aligned and facing up.
For proper alignment:
Slightly under-tighten
the armrest bolts until all
eight (8) of them are in place.
Place the seat on top of the box
with the bottom side up.
Line up the armrest to the seat and loosely
tighten with two bolts. Repeat on the other side.
Line up the back with the armrest and loosely
tighten with two bolts. Repeat on the other side.
Insert the gas lift cylinder.
ARMREST BOLT
A
ARMREST BOLT
A

Check Height
Tilt Lock
User Manual
B
TILT BOLTS
TILT WASHER
󾙓
󾙔
󾙕
󾙖
Order of bolts for better durability.
Right hand
910
11
Once all of the armrests bolts are in place,
fully tighten each bolt into place.
Put control mechanism at the bottom of the
seat find the front sticker and tighten the bolts.
Optional insert
Bolt cap of your
preference
EBOLT CAP
12
C