Neo Chair N-GEN CITUS Series User manual

CITUS Series
USER GUIDE &
ASSEMBLY INSTRUCTIONS
WWW.NEOCHAIR.COM

We recommend keeping your
Allen key for future maintenance.
IT'S TIME TO UPGRADE YOUR CHAIR!
CHAIR PARTS
4
5
HARDWARE
ACCESSORIES
If you see any missing part, please contact [e-mail]
Back
BASE
SEAT
METAL PLATE
ARMREST
GAS LIFT
CONTROL MECHANISM
WHEEL
ALLEN KEY
FOOTREST
CUSHION
TILTING
BOLT X4
ARMREST
BOLT X4
PLATE -
TILTING X3
PLATE -
BACKREST X4
FOOTREST
BOLT X4
BOLT CAP X4
HEAD CUSHION LUMBAR SUPPORT
Let Team Neo Chair know if there is any issue. [e-mail]
STEP 1. BASE 1 2 3
Start with attaching the
base leg vertically
Press the base till you
hear the “click”
Flip the base upside down
and apply pressure
Ouch! Be careful not to get
your hands caught in the gap.

Let Team Neo Chair know if there is any issue. [e-mail]
When the bolts seem loose, detach the armrests and
try inserting the bolts directly into their holes.
*Using an electric drill can damage the chair.
Please re-tighten bolts manually.
LOOSE BOLT ALERT!
IMPORTANT
NOTICE
STEP 2. SEAT + FOOTREST
12
x2~3
UNDER-TIGHTEN
THE BOLTS
THE BOLT HOLES
SHOULD BE ALIGNED TIGHTEN ALL BOLTS
1 2 3
Take the footrest metal bar out
Put the footrest cushion under the metal bar
FOOTREST
BOLT X4
Make sure that the cushion is placed within the rectangular metal bar
NOTE :

Let Team Neo Chair know if there is any issue. [e-mail]
TILTING ASSEMBLY
SEQUENCE
ASSEMBLY OF
BOLTS 1 AND 2
ASSEMBLY OF
BOLTS 3 AND 4
TIGHTEN
ALL FOUR BOLTS
LOCKING
1
2
LOCKING
3
4
LOCKING
3
45
TILTING
BOLT X4
CONTROL
MECHANISM
May cause muscle strain back injury.
Slide the footrest in the plastic holder

1 2
3 4
[e-mail]
Let Team Neo Chair know if there is any issue.
RIGHT
STEP 3. BACK,
ARMREST PLATE -
BACKREST X4
PLATE -
TILTING X3

Let Team Neo Chair know if there is any issue. [e-mail]
SAFETY INFORMATION
This product is
designed for
one person
to sit at a time.
DO NOT use the
chair unless all
bolts, screws
and knobs are tight
DO NOT use the chair if
any of the components is
missing or damaged.
DO NOT stand on
the chair as a step
stool or a ladder.
DO NOT tilt the chair
forward, left, or right
while sitting.
Be careful NOT TO FALL
off from the chair.
Regularly check
and thighten all bolts,
screws, and knobs.
Be careful,
as some parts may be
sharp and heavy.
Keep in a
dry and cool place.
Failure to follow
these warnings
may cause
serious injuries.
Be careful not to hit the
furniture edges.
When moving the object,
proceed with caution.
5
RIGHT
LEFT
6
9
ARMREST
BOLT X2
ARMREST
BOLT X2
BOLT CAP X4
OPTIONAL

Let Team Neo Chair know if there is any issue. [e-mail]
If the CONTROL MECHANISM
is properly installed, it should
be on your RIGHT.
USER GUIDE
CHECK!! NOTICE!
HEAD CUSHION, LUMBAR SUPPORT
RECLINE
Do not press armests
hard when standing up,
this may damage a product.
HEIGHTLOCKING
When reclining, armrests pivot
ARMREST
RETRACTABLE FOOTREST
!

WWW.NEOCHAIR.COM