Neo Chair BLC User manual

X8
BACK X1 SEAT X1 ARMREST X2 CONTROL
MECHANISM X1
WHEEL X5 CENTRAL BASE X1 BASE X5 GAS LIFT
CYLINDER X1
A
X4
B
X10
X8
C
X1
D
E
※Please make sure all the parts are included.
Missing parts? [email protected]
[e-mail]
www.neochair.com
Read the instructions carefully. Please follow the assembly steps.
Cautions
To deodorize the leather
leave the chair in a shady
outside for 1-2 days.
Use this product only for
seating one person at a time
Regularly check all bolts,
screws, and knobs are tight
Be careful, some of the part
are heavy and has sharped edge
Failure to follow these warnings
may cause serious injury
DO NOT use the chair
unless all bolts, screws
and knobs are tight
DO NOT use the chair if
only components are
missing or damaged
DO NOT stand on the chair
use as a step stool or ladder
ASSEMBLY
INSTRUCTION
Instructions
User Manual
Cautions
Contents
BLC
For longer use
Re-tighten bolts every 6 months by using
the enclosed allen-key.
*Using an electric drill can damage the chair.
Please re-tighten bolts manually.
If there are any problems, do not hesitate to e-mail us. [e-mail]
Our goal is to create a perfect customer experience.
Let us know if you have any feedback.
Your comment motivates us to become a better team.
Enjoy your new favorite chair
[email protected]
www.neochair.com
@NEOCHAIR
neochair_office

Instructions
1.2.
3.4.
5.6.
7.
Check Height
Optional insert
Tilt Lock
STEP 1 Bottom
STEP 2 Top
User Manual
ABOLTS
8.
Under-tighten
CBOLTS
9.10.
11.
1
2
3
4
FRONT
FRONT
BBOLTS
Order of bolts for better durability.
Right hand
Bolt cap of your
preference
DBOLT CAP
Under-tighten each bolt
make sure bolt holes aligned and tighten!
※NOTICE
If there are any problems, do not hesitate to e-mail us. [e-mail]