Neo Chair M28 User manual

BACK X1 SEAT X1 ARMREST X2 CONTROL
MECHANISM X1
WHEEL X5 BASE X1 GAS LIFT
CYLINDER X1
ALLEN KEY X1
X4
A
X4
B
X4
C
DX4
(SEAT)
(BACK)
(WASHER)
(CONTROL)
※Please make sure all the parts are included.
Missing parts? [email protected]
Instructions
User Manual
Cautions
Contents
[e-mail]
www.neochair.com
Cautions
Use this product only for
seating one person at a time
Regularly check all bolts,
screws, and knobs are tight
Be careful, some of the part
are heavy and has sharped edge
Failure to follow these warnings
may cause serious injury
DO NOT use the chair
unless all bolts, screws
and knobs are tight
DO NOT use the chair if
only components are
missing or damaged
DO NOT stand on the chair
use as a step stool or ladder
Read the instructions carefully. Please follow the assembly steps.
ASSEMBLY
INSTRUCTION
M28
Our goal is to create a perfect customer experience.
Let us know if you have any feedback.
Your comment motivates us to become a better team.
Enjoy your new favorite chair
[email protected]
www.neochair.com
@NEOCHAIR
neochair_office
If there are any problems, do not hesitate to e-mail us. [e-mail]
To deodorize your new chair
leave the chair in a shady
outside for 1-2 days.
For longer use
Re-tighten bolts every 6 months by using
the enclosed allen-key.
*Using an electric drill can damage the chair.
Please re-tighten bolts manually.

Instructions
Check Height
Tilt Lock
User Manual
3.4.
5.
1
2
3
4
CBOLTS
Order of bolts for better durability.
Right hand
BBOLTS ABOLTS
Under-
tighten
FRONT
D
Done!
WASHER
If there are any problems, do not hesitate to e-mail us. [e-mail]
Use the base as support and press
firmly from above with the wheel.
Make sure to put the wheels in the base
before the gas lift cylinder.
Please use the allen key included
instead of an electric drill.
※NOTICE
Use the box for
an easier assembly.
TIPS!
4.5.6.
MAKE SURE TO
REMOVE THE GAS LIFT CAP
1.2.
STEP 2 Top