Neo Chair M28B User manual

M28B / M28W
ASSEMBLY
INSTRUCTION
*Use power drill
for tighter assembly
※Please Make sure all parts are included.
If not, email us [email protected]
BACK X1 SEAT X1 ARMREST X2 CONTROL
MECHANISM X1
WHEEL X5 BASE X1 GAS LIFT
CYLINDER X1
ALLEN KEY X1
X4
A
X4
B
X4
C
DX4
(SEAT)
(BACK)
(LOCKING)
(WASHER)
Instructions
User Manual
Cautions
Contents
Cautions
[email protected]
To deodorize a leather,
leave the chair in a shady
outside for 1-2 days.
For longer use
re-tighten bolts every 6 months.
Use this product only for
seating one person at a time
Regularly check all bolts,
screws, and knobs are tight
Be careful, some of the part
are heavy and has sharped edge
Failure to follow these warnings
may cause serious injury
DO NOT use the chair
unless all bolts, screws
and knobs are tight
DO NOT use the chair if
only components are
missing or damaged
DO NOT stand on the chair
use as a step stool or ladder
If there is any problem, do not hesitate to contact us with e-mail below.
Neo Chair is a professional furniture manufacturer
and supplier always considering the life of our customers.
Thank you for your purchase!
www.neochair.com
[email protected]
Read the instructions carefully. Please follow the assembly steps.
[email protected]
www.neochair.com
@NEOCHAIR
intargram.com/neo_chair

Instructions
1.2.
Check Height
Tilt Lock
STEP 1 Bottom
STEP 2 Top
User Manual
3.4.
5.
1
2
3
4
CBOLTS
Order of bolts for better durability.
Right hand
If there is any problem, do not hesitate to contact us with e-mail below. [email protected]
BBOLTS ABOLTS
Use packaging box
for easier assembly.
TIPS!
X3
Under-tighten each bolt
make sure bolt holes aligned and tighten!
※NOTICE
1 .
2 .
Under-
tighten
FRONT
D
(Be careful the tip of the leg might be sharp. Residue on the
surface is from welding finishes, not a defect of the product.)
Use base legs as support
aiming the hole. Press it strongly.
Done!
WASHER