Great Little Trading Buttons Medium Bookcase User manual

1
Buttons Medium Bookcase
03/02/2020
V2
easy - medium - hard
Assembly Difculty
one-person job
A few important pointers before you start:
• Please read the instructions right through before you start, and check
that all the components have been included in the pack; we nd
separating all the hardware into piles makes it easier to be sure that
everything is present and correct.
• Make sure you have the right tools. Allen keys are provided if required,
but screw drivers and other tools are not. You’ll nd details of the tools
you need at the beginning of the instructions.
• Do not throw away any packing materials until assembly is complete,
just in case you accidentally discard smaller parts or hardware.
Thank you for shopping with GLTC, we hope you enjoy having
this product in your home.
We know assembling furniture, toys or accessories is not everyone’s
favourite way to spend their time, so we’ve tried to make assembling
this item as quick and painless as possible.
Hopefully our efforts will have been worthwhile and you’ll sail through
the whole process. But if it all feels a bit too much like hard work, then
we do have an assembly company we can recommend: the Flatpack
Construction Company offers a nationwide service and can be
contacted on 0843 289 4951 or www.atpackconstruction.co.uk.

2
Safety Warnings:
• Warning! Not suitable for children under 3 years due to small parts
which may become detached and present a choking hazard.
• Assembly by a competent adult is required.
• Unassembled product contain small parts which may pose a choking
hazard to young children.
• During assembly children should be kept away from the product due
to possible risk of injury.
• Assemble and use on a at and level surface.
• WARNING! FURNITURE TIPPING RISK. Serious or fatal crushing
injuries can occur from furniture tipping over. Ensure you secure this
furniture product to the wall before you use it, using the kit provided.
If you have not received an anti-tip kit with your product please
contact Customer services.
• To avoid possible injury from tipping - DO NOT allow children to step
or climb on the product.
• Maximum shelf weight load 10kg. Do not overload.
• Check all xtures and ttings regularly and tighten as necessary.
• Remove all packaging before allowing your child to use the product.
• Please retain for future reference.
Customer Service:
• If you nd that any components are missing or damaged, please do
not begin assembly and do not use the item. Please contact GLTC
Customer Services on 0344 848 6000 immediately.
• We do stock spare hardware packs at our warehouse, so we should be
able to send you a replacement pack immediately if required.
Product Care:
• Wipe clean using a soft damp cloth followed by a dry cloth.
• Do NOT use cleaning products which contain ammonia, solvents or
abrasive material.
• Do NOT expose the item to extremes of heat and humidity.
• Regularly check all fastenings, xtures and ttings to ensure that they
properly tightened.
Could we do better?
If there is anything you think could be improved in these instructions or in
the assembly of this product we’d be grateful if you could let us know; we’ll
pass any helpful hints and tips on to other customers via our website and
update the instructions.
All you need to do is drop us a line at [e-mail]
Thank you

3
Component Check List
A B
1x Back leg
C
1x Back leg
1x Front leg
You will need
(not supplied)
Phillips Head Screwdriver
#1
8x Flat Headed Screws
40mmL
8x Cam Dowels
#2
#3 #4
1x Front leg
D
E
2x Lower shelves 1x Top shelf
F
4x Shelf side panels 2x Back panels
G H
6x Bolts
53mmL
8x Domed Screws
10mmL
12x Barrel Nuts
1x Allen Key
4x Domed Screws
16mmL
1x Anti-Tip Strap Kit
6x Button Bolt
#5 #6
#7 #8
#9 #10
8x Cam Locks

4
Hardware for Step 1:
x4 #1 Cam Dowels
STEP 1:
Prepare back leg panels A and B by inserting 4x cam dowels (#1) into the holes as shown.
STEP 2:
Attach 2x side panels (G) to shelf panel E with 4x at headed
screws (#2).
Repeat for the remaining E and G panels.
These are the lower two shelf components.
Note:
The large drill holes on the side panels to face inwards.
Hardware for Step 2:
x8 #2 Flat Headed Screws
Hardware for Step 3:
STEP 3:
Lay the two shelf components on the oor with the grooved edge facing upward. This is
the back. As shown position back leg panels A and B over the constructed shelves with the
grooves facing up and aligned with the shelves.
Push panels A and B into position. Insert 4 x cam locks (#3) into the large drill holes on the
inside of each G panel, turn clockwise to tighten.
B
#1 #1
#1
#1
A
x4 #3 Cam Locks
TOP
G
G
#2
#2
E
#2
#2
BASE
Using cam locks:
When inserting into the panel, ensure that
each cam lock’s arrow is pointing towards the
drill hole on the side edge of the panel & the
dowel that it will be receiving.
When the panels are in the connected
position, using a screwdriver, turn the cam
lock in a clockwise direction to lock and
secure.
EE
GG
GG
#3
#3
#3 #3
#3
A
B
A
B

5
Hardware for Step 5:
Hardware for Step 4: Hardware for Step 6:
x6 #5 Barrel Nuts
x4 #1 Cam Dowels
x8 #6 10mm Domed
Screws
x1 #8 Allen Key
x6 #4 Bolts
x4 #7 16mm Domed
Screws
STEP 4:
Position top shelf panel F to sit under the two remaining drill holes of the leg panels.
Prepare the shelf panels by inserting 6x barrel nuts (#5) into the holes as shown.
Secure shelves using 6x bolts (#4), tighten bolts using allen key provided.
STEP 5:
Position the 2x back panel Hs in place as shown and align the
drill holes with those along the grooved edge a shown.
Fix in place to leg panel A and B with 8x shorter domed screws
(#6). Then nish xing to the two shelf panel Es with 4x longer
domed screws (#7).
STEP 6:
Prepare front leg panels C and D by inserting 4x cam dowels
(#4) into the holes as shown.
F
E
E
G
G
#4
#4
#4
#4
#4
#4
#5
#5
#5
#5
#5
#5
#5
C
D
#1 #1
#1
#1
TOP
Note:
This step uses hardware that looks the same, but are different
lengths. Ensure you use the hardware correctly or you risk
damaging the unit.
#6
#6
#6
#6
#6
#6
#6
#6
#7
#7
#7 #7
H
H
E
F
BASE

6
Copyright© 2020 G.L.T.C. Ltd. All rights reserved.
Great Little Trading Company and GLTC are registered trade marks of G.L.T.C. Limited.
Hardware for Step 7:
Hardware for Step 8:
x6 #5 Barrel Nuts
x1 #10 Anti Tip Strap Kit
x4 #3 Cam Locks
x6 #9 Button Bolts
STEP 7:
Carefully turn the unit over.
Push front leg panels C and D into position as shown. Insert 4 x cam locks (#3) into the
large drill holes on the inside of each G panel, turn clockwise to tighten.
Prepare shelf panels by inserting 6x barrel nuts (#5) into the holes as shown.
Secure shelves to panels C and D using 6x button bolts (#9).
STEP 8:
Before you use your unit, we strongly advise that you use the anti-tip kit (included) to
secure this product to the wall, especially if young children have access to the unit.
B
#5
#5
#9
#9
#9
#9
#9
#9
#5
#3
#3
#5
#5
#5
#5
D
#3
#3
C
++
#10
#10