Neo Chair PAC-E User manual

ARMREST
X8
BACK X1 SEAT X1 ARMREST X2 CONTROL
MECHANISM X1
WHEEL X5 CENTRAL BASE X1 BASE LEG X5 GAS LIFT
CYLINDER X1
A
TILT
X4
B
TILT WASHER
X4
C
BASE
X10
BOLT CAP
X8
D
ALLEN KEY
X1
E
F
※Please make sure all the parts are included.
Missing parts? [email protected]
[e-mail]
www.neochair.com
Read the instructions carefully. Please follow the assembly steps.
Cautions
To deodorize the leather
leave the chair in a well
ventilated area for 1-2 days
Use this product only for
seating one person at a time
Regularly check all bolts,
screws, and knobs are tight
Be careful, some of the part
are heavy and has sharped edge
Failure to follow these warnings
may cause serious injury
DO NOT use the chair
unless all bolts, screws
and knobs are tight
DO NOT use the chair if
only components are
missing or damaged
DO NOT stand on the chair
use as a step stool or ladder
ASSEMBLY
INSTRUCTION
Instructions
User Manual
Cautions
Contents
PAC-E
For longer use
Re-tighten bolts every 6 months by using
the enclosed allen-key.
*Using an electric drill can damage the chair.
Please re-tighten bolts manually.
If there are any problems, do not hesitate to e-mail us. [e-mail]
Our goal is to create a perfect customer experience.
Let us know if you have any feedback.
Your comment motivates us to become a better team.
Enjoy your new favorite chair
[email protected]
www.neochair.com
@NEOCHAIR
neochair_office




Instructions
STEP 1. 
Instructions
STEP 2. 
※Take off the plastic cover first
2
5
6
7 8
3
4
1
Secure with bolts.
Insert wheels while
the base is upside down.
Place the plastic cover
back on the base.
BASE BOLT
D
Insert base legs into central base.
For proper alignment:
Slightly under-tighten the bolts
For proper alignment:
Slightly under-tighten the bolts
Place the seat on top of the box
with the bottom side up.
Attach both armrests to the seat. Line up the back to the armrest
and insert bolts.
Insert the gas lift cylinder.
ARMREST BOLT
A
ARMREST BOLT
A
※



Check Height
Tilt
Lock
User Manual
B
TILT BOLTS
TILT WASHER
1
2
3
4
Order of bolts for better durability.
Right hand
910
11
Once all the armrest bolts are
in place, fully tighten every bolt.
Match the front stickers and secure
the Control Mechanism to the seat.
Optional insert
Bolt cap for your
preference
EBOLT CAP
12
C