Neo Chair 801B User manual

801B
ASSEMBLY
INSTRUCTION
Instructions
1.2.
※Please Make sure all parts are included.
If not, email us [email protected]
BACK X1 SEAT X1 ARMREST X2 CONTROL
MECHANISM X1
WHEEL X5 BASE X1 GAS LIFT
CYLINDER X1
X4
A
X2
B
X4
C
X4
D
(ARMREST)
(BACK)
(LOCKING)
(WASHER)
ALLEN KEY X1
STEP 1 Bottom
STEP 2 Top
Instructions
User Manual
Cautions
Contents
If there is any problem, do not hesitate to contact us with e-mail below. [email protected]
Read the instructions carefully. Please follow the assembly steps.
BBOLTS
ABOLTS
X3
Under-tighten each bolt
make sure bolt holes aligned and tighten!
※NOTICE
Under-
tighten
D
[email protected]
https://www.neochair.net
1 .
2 .
(Be careful the tip of the leg might be sharp. Residue on the
surface is from welding finishes, not a defect of the product.)
Use base legs as support
aiming the hole. Press it strongly.
Use packaging box
for easier assembly.
TIPS!

Check Height
Tilt Lock
User Manual
3.4.
1
2
3
4
CBOLTS
Order of bolts for better durability.
Right hand
FRONT
*Use power drill
for tighter assembly
Cautions
To deodorize a leather,
leave the chair in a shady
outside for 1-2 days.
For longer use
re-tighten bolts every 6 months.
Use this product only for
seating one person at a time
Regularly check all bolts,
screws, and knobs are tight
Be careful, some of the part
are heavy and has sharped edge
Failure to follow these warnings
may cause serious injury
DO NOT use the chair
unless all bolts, screws
and knobs are tight
DO NOT use the chair if
only components are
missing or damaged
DO NOT stand on the chair
use as a step stool or ladder
If there is any problem, do not hesitate to contact us with e-mail below.
Neo Chair is a professional furniture manufacturer
and supplier always considering the life of our customers.
Thank you for your purchase!
[email protected]
[email protected]
https://www.neochair.net