NetComm Wireless NF10W User manual

NF10W - QUICK START GUIDE
VDSL / ADSL WiFi
Modem Router

2
WELCOME
This quick start guide is designed to get you up and running quickly with your new
router. More advanced set up instructions can be found in the user manual which
can be downloaded from www.netcommwireless.com

1
TABLE OF
CONTENTS
PACKAGE CONTENTS 2
PRE-REQUISITES 4
SETTING UP YOUR ROUTER
ADSL Connections 4
VDSL Connections 6
Ethernet Connections 8
LOGGING INTO THE WEB INTERFACE 10
CONFIGURING THE DEVICE FOR USE 11
WITH AN INTERNET SERVICE
ADSL 12
VDSL 14
Ethernet WAN 16
CONNECTING WIRELESS DEVICES 19
CHANGING THE WIRELESS PASSWORD 20
CHANGING THE ADMINISTRATOR PASSWORD 22

2
1. VDSL / ADSL WiFi Modem Router (NF10W)
2. RJ45 Ethernet cable
3. RJ11 Telephone cable
4. Power supply (12V/1.5A)
5. WiFi Security card
6. Warranty card
7. Quick Start Guide
PACKAGE
CONTENTS

3
6
2
4
1
7
3
5

4
PRE-REQUISITES
If you are using a voice service on
the same line as the DSL service,
you will need a DSL line lter for
each handset or back-to-base
home alarm system on the line.
1. Connect the supplied RJ11 cable to the “modem” port of your DSL line
lter and then connect the other end to the DSL port on the back of the
NF10W. Connect the DSL line lter (not included) to the wall socket and
then connect your handset to the “phone” port of the lter.
2. Connect the supplied RJ45 Ethernet cable from one of the yellow
Ethernet ports (1-4) on the back of the NF10W to your computer.
3. Connect the included power adapter to the Power jack of the NF10W
and then plug it into an available wall socket. Press the ON/OFF button
to power the router on. The Power light illuminates in red. When the
NF10W has nished booting up, the Power light turns green.
SETTING UP YOUR ROUTER
ADSL Connections

5
1
2
3
= Optional Elements

6
1. Connect the supplied RJ11 cable to the “modem” port of your DSL line
lter and then connect the other end to the DSL port on the back of the
NF10W. Connect the DSL line lter (not included) to the wall socket.
2. Connect the supplied RJ45 Ethernet cable from one of the yellow
Ethernet ports (1-4) on the back of the NF10W to your computer.
3. Connect the included power adapter to the Power jack of the NF10W
and then plug it into an available wall socket. Press the ON/OFF button to
power the router on. The Power light illuminates in red. When the NF10W
has nished booting up, the Power light turns green.
SETTING UP YOUR ROUTER
VDSL Connections

7
= Optional Elements

8
1. Connect a straight-through Ethernet cable to the blue WAN port on the
back of the NF10W and then connect the other end to your upstream
gateway device, e.g. an FTTP gateway or HFC cable modem.
2. Connect the supplied RJ45 Ethernet cable from one of the yellow
Ethernet ports (1-4) on the back of the NF10W to your computer.
3. Connect the included power adapter to the Power jack of the NF10W
and then plug it into an available wall socket. Press the ON/OFF button to
power the router on. The Power light illuminates in red. When the NF10W
has nished booting up, the Power light turns green.
SETTING UP YOUR ROUTER
Ethernet Connections

9
1
2
3

10
LOGGING
INTO THE
WEB INTERFACE
1. Open a web browser (such as Internet Explorer®
/ Microsoft Edge, Mozilla Firefox® or Google
Chrome™), type http://192.168.20.1 into the
address bar and press Enter.
2. At the login screen, type admin into both the
Username and the Password elds, then click the
OK button.

11
CONFIGURING
THE DEVICE FOR
USE WITH AN
INTERNET SERVICE
1. Click on the Basic Setup menu item on the left side
of the screen.
2. Follow the instructions for your connection type.

12
ADSL
1. Select ADSL and click the Next button.
2. Select either the PPPoE or PPPoA for your internet
connection as specied by your Internet Service
Provider (ISP). Click the Next button.

13
3. In the User ID and Password elds, enter the
Username and Password assigned to you by your
Internet Service Provider (ISP). Click the Finish
button.
The account settings are saved and the NF10W
connects to the internet.

14
VDSL
1. Select VDSL and click the Next button.
2. Select the WAN mode for your internet connection
as specied by your Internet Service Provider (ISP).
Click the Next button.
3. Select the correct VLAN option for your connection.
For New Zealand customers, the requirement for
VDSL is VLAN tag 10. If you are not sure of the
tagging requirement for your connection, please
contact your ISP. Click the Next button.

15
4. In the User ID and Password elds, enter the
Username and Password assigned to you by your
Internet Service Provider (ISP).
5. Click the Finish button when you have entered the
required details.

16
Ethernet WAN
1. Connect an RJ45 Ethernet cable to the WAN port
on the NF10W. Connect the other end of the cable
to your WAN service.
2. Select Ethernet WAN then click the Next button.
3. Select the WAN mode for your internet connection
as specied by your Internet Service Provider (ISP).
Click the Next button.

17
4. PPP over Ethernet (PPPoE): In the User ID
and Password elds, enter the username and
password assigned to you by your Internet Service
Provider (ISP). Click the Finish button when you
have entered the required details.
5. IP over Ethernet (IPoE): If your ISP has supplied a
static IP address, select Use the following Static
IP address and enter the details, otherwise select
Obtain an IP address automatically. Click the
Next button.

18
6. The settings are displayed in a summary. Click
Apply/Save to save them.